5

Cooling Tower - Liang Chi model LBC 5 TR. Cooling cap. 19.5k,water flow 65L

$319

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 04/05/2011 5.00 PM AEST

  • Deliver to: Pickup Only Various Locations
  • Location: St Marys, NSW
  • Support: Sarah Clemente or (p) 02 9741 9620

Description

Cooling Tower - Liang Chi model LBC 5 TR. Cooling cap. 19.5k,water flow 65L/m,Air volume 60cm/m,inlet/outlet/ = 1 1/2``. Fan poered by 1/6 HP 3 phase motor. Includes Onga water pump model 413, .4 Kw 24 volt plug in.with assorted hoses and fittings.( Inspection available on Tuesday 3rd of May after 3:30pm by appointment with the vendor on 0408 331 679. Located at 3/Lot 1 Plasser Crescent, St Marys NSW.) (153624-11)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Report

Conditions Of Sale

Conditions Of Sale

This Sale is Pick Up Only from Mulgrave, Riverstone & St Marys, NSW

These Assets are Used therefore Inspection is Highly Recommended Prior to Bidding, Description & Photos Should Be Used as a Guide Only

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

ALL ASSETS IN THIS SALE ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

BUYERS PLEASE NOTE:

  • Collection of assets is the responsibility of the purchaser.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have people to help you load your items and right transport.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Pick ups are not allowed outside of the dates/times specified.

Assets located at Mulgrave, NSW

Assets located at Mulgrave, NSW
  • Power Press, welded products C press, 70 ton capacity with pneumatic clutch, max job height approx 450mm open and 150mm closed, 300mm stroke, bed approx 920mm x 460mm with single T slot, throat approx 250mm Dia 415 volt plug in.
  • Incline Press, John Heine No102A, set up for bending approx 340mm (L) sheet metal 415 volt bus bar connected. 
  • Plastic Injection Moulding Machine Manumold, S/N 617H439-HV226, low production unit, manual control, hydraulic clamping with remote power pack, 415 volt plug-in.

Assets located at Riverstone, NSW

Assets located at Riverstone, NSW
  • Platform Scales, Avery NSC 6/9A/105 capacity 400kg, counter weight style, platform approx 800mm x 800mm.
  • Hydraulic Ram, purpose built on fabricated metal stand, approx 4200mm (L), mounted with hydraulic ram with 450mm stroke x 60mm (Dia) shaft.
  • Initrogen Generator, Nitro-Technic model NT-1200, capacity 8.5 litres per minute with 20 litre internal capacity storage tank, single filter with air intake and Nitrogen outlet.
  • Vertical Receiver Tank, Martinson 100 litre, approx 1800mm (H) x 400mm (Dia), on legs, D.O.M 03/09, capacity DP 1300 KPA, TP 1950 KPA (unused) with pressure release valve. (Purchaser should ensure this item is inspected in accordance with AS/NZS 3788 Pressure equipment in-service inspection prior to use.)
  • Thermostat Vacuum Oven, Townson and Mercer model 810049 with remote vacuum pump on mobile stand, 8.6Amps max, oven size approx 270mm (Dia) x 300mm (D) 240 volt plug in.
  • Electric Chain Block, Demag PKIN-F with pendant control 415 volt 4mm chain x 3400mm (L), 250kg capacity.
  • Electric Motor, Crompton Parkinson, 3HP 415 volt

Assets located at St Marys, NSW

Assets located at St Marys, NSW
  • Horizontal Injection Molding Machine TMC P.E.P.S Model TMC 200. Clamp force 220 US tons shot weight 17 Ozs , heating power 10.7 Kw, S/N 8609866, M.F.D 1986 3 Phase.
  • Granulator - Plastic Recycling Machinery. Type MGK 250 175 code 1185. Mobile, 3 KW 3 Phase plug-in.
  • Robot System - APEX>  Model ST 550 S/N ST 0002001-55 Features pneumatic operation Vertical stroke adjustment 440-550mm,Verrtical stroke block 0-550mm.Multi Function digital pendant control and Installation and operation manual.
  • Ratio Mixing Valve _ APEX pneumatic 3-5 Bar Cycle time 1-99 Sec. S/N VR29812030
  • Vacuum hopper feeder. Fleming Plastic Equipment Fluro with Watchdog 1000 Data logger includes hose and pick-up tube.
  • Cooling Tower - Liang Chi model LBC 5 TR. Cooling cap. 19.5k, water flow 65L/m, Air volume 60cm/m, inlet/outlet/ = 1 1/2". Fan poered by 1/6 HP 3 phase motor. Includes Onga water pump model 413, .4 Kw 24 volt plug in with assorted hoses and fittings.
  • Optical Projector - Chekker Projector by Alfred Herbert. Features Nikon graduated lens type 40698 240 volt plug-in.

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium ie Successful Bid Price is $100 + 13.5%Buyers Premium = $113.50 + 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invoices exceeding $5000 may also be made onsite via bank cheque. Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Online Auction Closing

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times

  • Lots 1 to 138: Tuesday 3rd of May between 9:00am & 4:00pm
  • Lots 200 to 215: Tuesday 3rd of May after 3:30pm by appointment with vendor on 0408 331 679
  • Lot 300: Tuesday 3rd of May between 9:00am & 4:00pm

Locations: Various Locations. Please refer to the lot description.

Asset Collection Post Auction

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

  • Monday 9th of May between 9:00am & 4:00pm
  • Tuesday 10th of May between 9:00am & 4:00pm

Location: Various Locations. Please refer to the lot description.

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting Grays staff to release your purchases to the third party.

Please Note:

  • Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
  • Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

OH&S

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale will require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Plant Hazard Reports

Plant Hazard Reports.pdf

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
N.H - Peakhurst NSW04/05/2011 5.20.27 PM AESTAU$3191104/05/2011 1.36.37 PM AEST
k.n - Swan Bay NSW04/05/2011 5.20.27 PM AESTAU$3091004/05/2011 11.58.44 AM AEST
s.a - guildford NSW02/05/2011 10.40.36 PM AESTAU$91002/05/2011 10.40.36 PM AEST
View all Industrial Sales