5

PWB Swiss tool presetter, digital readout, angle measuring, ISO 50 taper,

$809

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 07/08/2012 8.00 PM AEST

  • Condition: Used
  • Buyers premium 15%
  • GST: Exclusive
    (see below note)
  • Deliver to: Pickup Only VIC
  • Location: 1828 Sturt Street, Alfredton, Victoria
  • Support: Melbourne Customer Service or (p) 03 8552 4444

Description

PWB Swiss tool presetter, digital readout, angle measuring, ISO 50 taper, 200 dia X 350 capacity, 240 volt single phase, Year of manufacture 2000, Capacity 200mm(Diameter) x 350mm(H) (Note: Item located at 1828 Sturt Street, Alfredton, Victoria) (Type B Asset) (77492-8)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

OHS Report

Contractor Site Requirements

Machining Centre

Machining Centre
  • Hitachi-Seiki 4 axis machining centre model VK55, BT50 spindle, max 6000 RPM, 20pc tool ATC, fitted with a Nikken 300 dia fully intergrated manual angle tilting rotary table 61mm through bore (A axis) and centre to suit, M11 secos control with expanded memory capacity. 415 volt 3 phase, complete with all manuals.

Radial Arm Drill

Radial Arm Drill
  • Kitchen Walker Radial arm drill model E2, #4 morse taper spindle, 25 to 1560 RPM, spindle feed .0035" to .041" with auto depth stop, maximum work height 4'6", fitted with a slotted angle adjusting machine table 600 X 600mm, 415 volt 3 phase. Complete with all manuals

Manual Mill

Manual Mill
  • King Rich Vertical milling machine, #40 spindle taper variable speed 70 to 3600 rpm, 1370 X 300 tee slotted table, fitted with a raised Z axis spacer, halogen work light, Jenix digital readout, X axis power feed, powered knee, 415 volt 3 phase, complete with all manuals.

Cordinate Measuring Machine

Cordinate Measuring Machine
  • Sheffield Discovery II series Cordinate measuring machine, complete with computer and operating system, Travel X500, Y600 and Z400, fully serviced and calibrated, including two Renishaw TP20 measuring probe heads and kit, 240 volt single phase. Complete with all manuals

Tool Pre Setter & Stand

Tool Pre Setter & Stand
  • PWB Swiss tool presetter, digital readout, angle measuring, ISO 50 taper, 200 dia X 350 capacity, 240 volt single phase

Caterpillar D343 Model SRCR 312 Kva 250kw

Caterpillar D343 Model SRCR 312 Kva 250kw
  • Caterpillar D343 3 phase generator set, model SRCR 312 Kva 250 Kw, 3007 hours, with service and run history book suplied.

Genral

Genral
  • Parker Majestic manual slow feed surface grinder, complete with a walker 440X180 electro magnetic chuck, 3 HP 2850 RPM dirrect motorised spindle, rapid vertical spindle traverse
  • Macson 2M modified tool and cutter grinder. Fitted with a 3 HP dirrect motorised spindle. Modified for tall work surface grinding. 415 volt 3 phase
  • Kerney & Trecker S-12 307 vertical milling machine, 1600 X 300 tee sloted table, iso 50 taper spindle 25 to 2000 RPM, rapid travers and feed to all 3 axis feed 5 to 640 mm/min. complete with manuals. 415 volt 3 phase
  • Beaver quick change milling tool holder ISO 50 taper, complete with 16 inch tool adaptors, holding rack and milling cutters.
  • Atom quick change milling tool holder ISO 40 taper, complete with 8 tool adaptors, collets and wall mounting rack.
  • Kerney & Trecker dividing head, ISO50 taper bore (40mm through bore size)
  • 8" Hydralic milling vice
  • News compound angle 5" machine vice
  • Compound angle 3" machine vice
  • 16" 4 jaw independent chuck
  • 9" diameter air driven rotary table
  • 11" double slide jaw machine vice
  • 200 X 360 angle milling fixture
  • BT40 adaptor holder
  • Rahn/Valenite setting table and dial indicator
  • HP design jet 1050C plus plotter model#C607413
  • Valenite BT50-RCA-380-15SG rotary coolant adaptor with VDA collet chuck
  • BIG brand 90 degree BT50 taper milling head
  • And More

Surplus Equipment to Sell

Surplus Equipment to Sell

For an obligation free appraisal and quote please contact Vince Smethurst today on 0448 114 136, 03 8552 4444 or email vinces@grays.com.au

Condition of Sale

Condition of Sale

This sale is pick up only from Alfredton, Victoria.

These Assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $5000 must be paid by direct deposit.

A Buyers Premium of 15% + 10% GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

Sale Information

Sale Information

This Sale is GST Exclusive.

This Sale has a 15% Buyers Premium ie Successful Bid Price is $100 + 15% Buyers Premium = $115.00 + 10% GST = Total Of $126.50.

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. For invoices totaling in excess of $5,000 GraysOnline reserves the right to charge a deposit against the purchaser’s credit card to a maximum of $5,000 or 20% of the invoice total. In bidding in this sale, the buyer agrees without reservation to GraysOnline doing so. Contact (02) 9741 9600 or at email accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totaling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail Price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Special Sale Terms

Special Sale Terms

Occupational Health & Safety Asset Removal and Reuse

GraysOnline warn buyers that all plant offered for sale at Auction may not be fit for use in a workplace. It is the buyers/users responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health & Safety Act and is fit for purpose.

The cost and responsibility for all aspects of asset removal lies with the buyer. All work carried out by the buyer or his/her agent must be in accordance with relevant site and/or industry conditions as well as to the instructions of GraysOnline Auctions and our vendor.

A summary of these types of enforceable requirements is as follows.

  • Persons under the age of 15 years of age will not be permitted on site unless accompanied and supervised by an adult at all times
  • Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site
  • Forklift, crane drivers, riggers etc will be required to produce license before commencing work on site
  • It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives
  • Work carried out on this site must be done in a manner compliant with all Occupational Health & Safety legislation
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment
  • GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site, eg safety footwear, safety eyewear, hard hats etc
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres

Online Auction Closing

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes GraysOnline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often.

Inspection

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

Monday 6th August 2012 between 9.00am and 4.00pm

Location ~ 1828 Sturt Street, Alfredton (Ballarat), Victoria

Collection

Collection

Delivery is not an option for this sale. The removal of the goods is the buyers responsibility.

Assets are to be collected from 1828 Sturt Street, Alfredton (Ballarat), Victoria.

  • The area is defined as a work site and in accordance with the requirements of the VIC OH&S Act 2004, site removal activities must be conducted on a safe manner. In order to manage and minimise site risks. The assets have been categorized into type A or B Assets

Type "A" assets are low risk & are to be removed by the purchaser with Grays staff supervision and are to be collected on Friday 10th and Saturday 11th August 2012 between 9.00am and 4.00pm.

Type "B" assets are high risk and the site activities must be in accordance with the attached contractor procedures and are to be collected on Friday 10th and Saturday 11th August 2012 between 9.00am and 4.00pm.

Type "B" assets are high risk and the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment with a qualified contractor. JSAs and contractor requirements forms are to be submitted before work is started on site.

Alternatively GraysOnline have pre-qualified the following contractors to perform removal work on site.

  • L Arthur Transport Melbourne: contact Jerald Arthur on 03 8371 2600 or machinery@larthur.com.au
  • Barry James crane hire Ballarat: contact Garry on 03 5329 2222 or cranes@barryjames.com.au
  • Shane from Total Crane Trucks on 0418 540 794
  • All lots have been electrically disconnected
  • If you would like to further discuss the site OH&S issues, please contact Grays OHS Manager. (Barry Sutton - 0409 230 005)

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid.

Please advise Graysonline of your removal/collection arrangements, the following contractor package must be faxed or emailed to Sue susanp@grays.com.au or 03 8552 4400.

An invoice will be available for collection when you pick up your goods.

Once assets are removed the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

Important Information: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots and provide suitably qualified personnel to remove their lots. All lots have been electrically disconnected. Occupational Health and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

Third Party Pick Up

Third Party Pick Up

If you intend to send a Third Party to collect your goods on your behalf, you need to send them with a copy of your Winner’s E-mail and Signed Note of Authority permitting GraysOnline staff to release your purchases to the third party. Alternatively, Email - susanp@grays.com.au or fax all relevant documents to (03) 8552 4400 with the required information to ensure a speedy and efficient collection.

The information needed is:

  • Sale and Lot Numbers e.g. 002-60325
  • Buyer’s Registered Name and/or Email
  • Transport details: Company Name, Contact Person and Job Number provided by the transport company.

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
C.S - DELACOMBE VIC07/08/2012 7.48.55 PM AESTAU$8091102/08/2012 2.10.53 PM AEST
p.l - western junction TAS07/08/2012 7.48.55 PM AESTAU$8091005/08/2012 7.56.31 AM AEST
P.D - Rowville VIC07/08/2012 5.50.50 PM AESTAU$4341003/08/2012 7.14.08 AM AEST
M.T - Bundoora VIC02/08/2012 4.18.09 PM AESTAU$341002/08/2012 4.18.09 PM AEST
View all Industrial Sales