5
RodgersReidy

CIG Arc Welder with Tig welder AC-DC conversion unit, Model 646278, 415 vol

$179

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 08/10/2013 2.30 PM AEDT

  • Deliver to: Pickup Only NSW
  • Location: 29 - 33 Carter Street, Lidcombe, NSW, 2141
  • Support: Makara Chao or (p) 02 9112 9463

Description

CIG Arc Welder with Tig welder AC-DC conversion unit, Model 646278, 415 volt. Note: this welder should be checked for safe operation as required by AS/NZ 3760:2003 in service safety inspection and testing prior to use. Buyers Please Note: AC Welders `This welder should be checked for safe operation as required by AS/NZ 3760:2003 - In service safety inspection and testing of electrical Equipment prior to use` (194446-12)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Report

Conditions Of Sale

Conditions Of Sale

This auction is Pick Up Only from Lidcombe, NSW.

These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 7.5% or 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYER'S PLEASE NOTE:

  • Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Collections are not allowed outside of the dates/times specified.

2007 Holden Crewman VZ Dual Cab Chassis

2007 Holden Crewman VZ Dual Cab Chassis
  • Build Date: 08/2007
  • Transmission: Automatic
  • Engine Capacity: 3.6 litre
  • No. of Cylinders: V6
  • Fuel Type: Petrol
  • Registration No: BDM28B
  • Registration Expiry: 15/10/2013
  • Odometer: 254504 km
  • Compliance Date: 08/2007
  • Exterior Colour: Blue
  • Interior Colour: Black
  • VIN: 6G1ZK32B06L975571

2003 Nissan Patrol ST GU III 7-seater Wagon

2003 Nissan Patrol ST GU III 7-seater Wagon
  • Build Date: 03/2003
  • Transmission: Sports Automatic
  • Engine Capacity: 4.8 litre
  • No. of Cylinders: 6
  • Fuel Type: Petrol
  • Registration No: YNU431
  • Registration Expiry: 30/03/2014
  • Odometer: 301851 km
  • Compliance Date: 03/2003
  • Exterior Colour: Grey
  • Interior Colour: Grey
  • VIN: JN1TFSY61A0345412

2008 Holden Rodeo LX RA 2WD Cab Chassis

2008 Holden Rodeo LX RA 2WD Cab Chassis
  • Build Date: 02/2003
  • Transmission: Automatic
  • Engine Capacity: 3.5 litre
  • No. of Cylinders: V6
  • Fuel Type: Petrol
  • Registration No: YNW836
  • Registration Expiry: 16/04/2014
  • Odometer: 230915 km
  • Compliance Date: 04/2008
  • Exterior Colour: Silver
  • Interior Colour: Grey
  • VIN: MPATFR26H3T100729

1999 Holden Rodeo LX TF R9 RWD Cab Chassis

1999 Holden Rodeo LX TF R9 RWD Cab Chassis
  • Build Date: 11/1998
  • Transmission: Manual
  • Engine Capacity: 3.2 litre
  • No. of Cylinders: V6
  • Fuel Type: Petrol
  • Registration No: No Plates
  • Registration Expiry: Unregistered
  • Odometer: 267265 km
  • Compliance Date: 06/1999
  • Exterior Colour: White
  • Interior Colour: Grey
  • VIN: JAATFR25HX7105616

2000 Mitsubishi Canter FB511BW 4x2

2000 Mitsubishi Canter FB511BW 4x2
  • Body type: Table top with aluminium dropside
  • Engine type: Diesel 
  • Transmission: manual 
  • Odometer showing: 346677 km 
  • VIN number: JMFFB511B0KJ40129 
  • Registration number: BK22VE 
  • Registration expiry: 15/11/2013
  • Compliance date: 03/200 
  • Features: NO BOOKS 
  • GVM: 3550 kg 
  • GCM: 4200 kg 
  • Exterior colour: Black 
  • Interior colour: Grey

Counter Balance Forklift Truck, Komatsu, Model FG25-8

Counter Balance Forklift Truck, Komatsu, Model FG25-8
  • Counter Balance Forklift Truck, Komatsu, Model FG25-8 with 2 stage mast 2760mm to 4500mm 1900kg capacity, dual fuel and gas equipped with `Freightmate` mobile weight gauge, Serial No. 132221

Gap Bed Lathe, Colchester Triumph 2000

Gap Bed Lathe, Colchester Triumph 2000
  • Gap Bed Lathe, Colchester Triumph 2000, 1800mm bed, 1200mm between centres, 415 volt with 3 and 4 jaw chucks and internal and external jaws, 50mm hollow bar feed

Welders

Welders
  • Mig Welder `Cigweld` Model 330SE with removable wire feed head, 415 volt pug in and 55 LPM oxy gauge
  • Mig Welder `Liquid Arc` Model Max Mig 400MP 415 volt plug in with gas gauge and hand piece
  • CIG Arc Welder with Tig welder AC-DC conversion unit, Model 646278, 415 volt
  • Arc Welder `Cebora` inverter sound 150s on steel trolley, 240 volt plug in
  • Tig Welder `Migomag` type 180 AC/DC 240 volt plug in
  • Arc Welder Turbo Weld 8, sip, 240 volt plug in
  • Arc Welder `Champion-Twinarc` 140 amp, 240 volt plug in
  • Arc Welder `Weldmate 240` 140 amps, 240 volt plug in on steel trolley
  • Arc Welder `Aston` Model 232 single phase 350 amp

Engineering & Fabrication Equipment

Engineering & Fabrication Equipment
  • `Brobo` slow speed metal cut off saw on stand, Model S315A, 350mm blade, 415 volt pug in with 130mm quick release vice
  • Mobile Dust and Fume Extractor `Ozone` Model PF-2, 240 volt plug in
  • Pedestal 450mm Drill Press JBS, Model RDM-250F, 25mm capacity 9 speed, table size approx 400mm on pedestal base, 240 volt plug in
  • Pedestal Drill Press `Trade Quality` Model RDM-1601B 16 speed, chuck size 16mm with 300mm adjustable job table, 240 volt plug in on pedestal base
  • Pedestal Drill Press `Trade Quality` Model RDM-1601B 16 speed, chuck size 16mm with 300mm adjustable job table, 240 volt plug in on fabricated stainless steel cabinet base
  • Mobile Petrol Honda Generator with integrated AIS trade power Arc welder, Model TP 200w with GX 390cc engine
  • Industrial Bench Grinder 200mm Model TDS-200E fitted with grinding wheel and 280mm linishing belt on pedestal base, 240 volt plug in
  • Jenny and Swage `Steelmaster` motorized forming machine, pedal operated, Model SM-MJS16 1.8mm capacity, built 3/2009, 415 volt plug in
  • Jib Attachment to suit forklift extendable, type FJL25 with swivel hook, 2500kg capacity
  • Steel Workbench with Dawn 130mm offset vice 2780mm x 1000mm x 900mm(h), plate top 10mm
  • Steel Work Bench with Record 150mm vice 1900mm x 1200mm x 900mm(h), plate top 20mm with under shelf
  • Pipe Threader Rigid 700 Electric, Model A, 240 volt plug in with approx 15 dies in galvanised tool box
  • Hydrostatic Pressure Pump, Model RP50 with pair flange heads
  • Hydrostatic Pressure Pump, Model RP50 with pair flange heads
  • Hydro Static Pressure Pump Rigid Model 1450 with assorted testing attachments
  • Hydraulic Body-Frame Repair Kit SS type 10 ton capacity in steel case
  • Hydraulic pipe bending machine 12 tonne capacity

Power Tools & Equipment

Power Tools & Equipment
  • Mobile Workshop Compressor, twin cylinder receiver tank, approx 900mm, 240 volt plug in
  • Magnetic base, Drill Press `Atra Ace` Model AS-30, 240 volt plug in
  • 1/2 inch Impact Drill Hitachi, Model WR-16SA, 240 volt plug in
  • Compound mitre saw Ozito Model CMS-210, 240 volt plug in
  • Metal Cut Off Saw GMC Model MX355B with 355mm blade, 240 volt plug in
  • Metal Cut off saw Metabo Model CS 23-355 with 355mm blade, 240 volt plug in
  • 9` Grinder `Hitachi` Model G23SE, 240 volt plug in
  • 2 x 9` Grinders, Hitachi, Model G23UB2, 240 vole plug in
  • 9` Grinder `Hitachi` Model G18SE3, 240 volt plug in
  • Rotary Hammer Drill `Ozito` Model RHG55, 240 volt plug in
  • Rotary Hammer Drill `Ozito` Model RHG55, 240 volt plug in
  • Rotary Hammer Drill `Ozito` Model RHG55, 240 volt plug in
  • 3 Power Tools including 2 x Rotary Hammer Drills and 1 x 9` grinder, 240 volt plug in
  • Rotary Hammer Drill `Makita` Model HR3000C with attachments in carry case, 240 volt plug in Rotary Hammer Drill Hilti Model TE25 with attachments in carry case, 240 volt plug in
  • Rotary Hammer Drill Hitachi in case, 240 volt plug in
  • Reciprocating Saw, Makita Model JR3050T in case, 240 volt plug in
  • Reciprocating Saw, `Ryobi` Model ERS800K in case, 240 volt plug in
  • Cordless drill `Ramset` Model CSD14, 14 volt in case with charger
  • Rotary Hammer Drill GMC Model RHDKITQ04282 in case, 240 volt plug in
  • Cordless Drill `Bosch` Model PSR14 with charger and 2 x batteries
  • Engraver `Ozito` Model RTG-920VK with attachments in carry case, 240 volt plug in
  • Variable Speed Drill `Ozito` Model OZSHD1050WA in carry case, 240 volt plug in
  • Cordless Drill Black & Decker, Model CD180-XE with 2 x batteries and charger in case

Chain Blocks

Chain Blocks
  • GIS Factory electric hoist 1600kg model: MS 1105 with east west/ up + down pendant, control + gurder traveller
  • Industrial Chain Block ``Garrick`` 5 tonne Model GCB05, chain diameter 9mm
  • Industrial Chain Block ``Garrick`` 5 tonne Model GCB05, chain diameter 9mm
  • Industrial Chain Block ``Anchor`` 2 ton 10mm chain diameter
  • Industrial Chain Block BTI 2 tonnes Model ECB2000X chain diameter 8mm lift approx 3 metres
  • Industrial Chain Block ``Garrick`` 3 tonne, Model GCB0 7.1mm chain diameter
  • Industrial Chain Block `Garrick` 3 tonne, Model GCB0 7.1mm chain diameter
  • Industrial Chain Block JBS 1 tonne with 6.3mm alloy load chain
  • Industrial Chain Block `Beaver` 1 tonne 6mm alloy load chain diameter
  • Industrial Chain Block `Roval` 1/2 tonne 5mm alloy load chain diameter
  • Lever Block 1500kg capacity, Model Beaver NG 7mm load chain diameter, lift height 1.5 metres
  • Lever Block 1500kg capacity, Model Beaver NG 7mm load chain diameter, lift height 1.5 metres

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 7.5% or 13.5% Buyers Premium

For example:

Successful Bid price is $100 + 7.5% Buyers Premium = $107.5 + 10% GST = $118.25

or

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50 + 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Online Auction Closing

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 16 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.
Enclosed footwear must be worn onsite – Safety boots may be required at industrial sites.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Inspection

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times

  • Tuesday 8th October 2013 between 8:00am & 12:00pm

Location: 29-33 Carter Street Lidcombe NSW

Asset Collection Post Auction

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

  • Friday 11th October and Monday 14th October 2013 between 8:00am & 4:00pm 

Location:  29-33 Carter Street Lidcombe NSW

To collect your purchases

please attend the collection address during the times advised with a copy of your winner's e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner's e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

  • Children under the age of 16 will not be permitted on site.
  • All persons visiting site must be wearing fully enclosed shoes, preferably safety boots.
  • All visitors to site must report to main office or Stores upon arrival.
  • Packaging and collection of assets is the responsibility of the purchaser.
  • Delivery is not available for this auction.
  • Any items not collected after the nominated collection times may be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

TRANSFER OF OWNERSHIP & REGISTRATION REQUIREMENTS

As registration and ownership requirements vary from state to state buyers should familiarise themselves with the registration and transfer requirements of the state in which the vehicle will be registered. As is standard practice the buyer is responsible for state transfer fees, duties etc. that may apply.

In line with requirements in Every State and Territory other than New South Wales, vehicles in these states/territories will be sold unregistered to private buyers. Plates will not be given to the successful buyer and it is their responsibility to obtain an UVP (unregistered vehicle permit) when organising to pick the vehicle up.

We advise purchasers to always check with relevant authorities (REVS, RTA, VIC Roads etc) for any previous vehicle history.

NSW REGISTERED VEHICLES - Before you buy a vehicle, it is your responsibility to check the registration and CTP insurance details of the vehicle via the RTA http://www.rta.nsw.gov.au/

or phone the RTA Contact Centre on 132213. You must transfer the registration into your name within 14 days of the vehicle coming into your possession or management.

GRAYS will not be liable for any fines in relation to registration matters and registration may be cancelled if not transferred within 14 days of the invoice date.

Once your invoice is paid, youll need to visit a motor registry with:

  • Your GRAYS paid invoice
  • Proof of identity, or if youre registering the vehicle in the name of a company or organisation, proof that the company or organisation is a legal entity
  • A completed Application for Transfer form
  • YOU WILL NOT NEED the old registration paperwork, these will not be given with the vehicle

And you may need to pay:

  • Transfer fee
  • Stamp duty (unless exempt)
  • Additional motor vehicle tax (or national heavy vehicle charges) if you have bought your vehicle from someone receiving an RTA concession (such as a pensioner) and you are not eligible for that concession
  • Late transfer surcharge. A surcharge will be applied to customers who fail to transfer the registration within 14 days of the date of acquisition

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
m.w - eugowra NSW08/10/2013 2.33.01 PM AEDTAU$1791107/10/2013 1.48.40 PM AEDT
P.G - Fairfield West NSW08/10/2013 2.32.44 PM AEDTAU$1691008/10/2013 1.58.03 PM AEDT
M.A - Morningside QLD07/10/2013 10.59.24 AM AEDTAU$691007/10/2013 10.59.24 AM AEDT
E.B - prestons NSW04/10/2013 4.35.31 PM AESTAU$591003/10/2013 5.40.43 PM AEST
Y.A - St Marys NSW03/10/2013 5.40.43 PM AESTAU$491002/10/2013 10.15.00 PM AEST
M.U - Mountain Lagoon NSW03/10/2013 10.34.00 AM AESTAU$391003/10/2013 10.33.56 AM AEST
A.P - Hartley Vale NSW02/10/2013 8.03.10 PM AESTAU$91002/10/2013 8.03.10 PM AEST
View all Industrial Sales