5

Wacker Packer - Plate Compactor fitted with 5 Hp Honda GX140 4 stroke motor

$689

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 03/04/2012 2.30 PM AEST

  • Deliver to: Pickup Only NSW
  • Location: Unit 2, 9-11 White Street, Dubbo, NSW, 2830
  • Support: Gabrielle Lombe or (p) 02 9112 9583

Description

Wacker Packer - Plate Compactor fitted with 5 Hp Honda GX140 4 stroke motor with Electronic ignition and Oil Alert. Plate size approx. 600 x 460 mm. (171254-17)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Report

Conditions Of Sale

Conditions Of Sale

This auction is Pick Up Only from Dubbo NSW

These assets are Used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYERS PLEASE NOTE:

  • Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Collections are not allowed outside of the dates/times specified.

Table Top Truck

Table Top Truck
  • Table Top Truck - 1991 Mitsubishi Model FK417 Flatbed Truck Vin 6F6K4G23DMA030260 Reg'n No. QQX766, Registered to 27/8/2012, GVM 9700, 6 cylinder diesel Non Turbo with manual 6 speed gearbox, Air Hand Brakes. Tray size approx. 6100 x 2400 mm with timber floor. Colour White. Odometer reading as at 20/3/12 859588 Km. Condition appears reasonable for age.

Pantec Truck

Pantec Truck
  • Pantec Truck - 1994Isuzu Pantec Truck Model NPR 392A Vin JAANPR66LR7100720 Reg'n No. AQ25QS, GVM 6200, 4 Cylinder Non Turbo Diesel with 5 speed manual 5 speed gearbox. Tray size approx. 4150 x 2200 x 2000 mm (H) fitted with container style doors and fitted with tie back rails. Fitted 'Heard' brand Bullbar. Colour: painted Orange and White, Odometer reading as at 20/3/2012 226617 Km

Komatsu Forklift

Komatsu Forklift
  • Forklift - Counter balance Forklift Komatsu 18 Dual Fuel (Gas bottle is Not included) model FG18HT-17 S/n 637619, Service weight 2913 Kg, 2 Stage mast and Side Shift, Capacity 1750 Kg @ 500mm load centre, Lift height 4000 mm, Solid tires

Panel Saw

Panel Saw
  • Panel Saw - Altendorf F45 Tilt Arbor Table saw with Motorised Rise, Fall and Tilt Adjustment of Saw Blade, Steel Guided Sliding Table 3800 mm long, Digital Cross Cut Fence with integrated Mitre Function, distance to Stops settings using Digital display. Angle with length compensation settable by measuring scale, Digital Rip Fence 1300 mm, Main Table extension 840 mm, Powder Coated, Swing Away parallel Safety Hood, Max saw Blade dia 500 mm (300 mm TCT blade fitted). Operating controls on both sides of the sliding table, Digital angle display, Motorised adjustment of the scoring motor (scoring blade not fitted). 4 Speed 3/4/5/6000 RPM, 7.5 Hp main motor, Scoring unit 9000 RPM, 1 Hp Motor. 415 volt Plug-in.

Edgebander

Edgebander
  • Edge Bander - Lato 235 Polymac with pull out table. Length approx. 3000 mm plus stock feed carousel. 415 volt Hard Wired

Woodworking & Engineering Equipment

Woodworking & Engineering Equipment
  • Dust Collector - Toolmac model 85-533130, 1 Hp motor, Mfg date 1998. 240 volt Plug-in.
  • Table Saw - Paoloni CS3000 Scribe Panel Saw Made in Italy with 0-45 deg Tilt, 3700 mm Sliding Table, Provision for dust extraction, Manual Rise and Fall, Mitre attachment. 415 volt Plug-in.
  • Post Former - Rapid brand by J&L Brodie Eng. P/L, working length approx. 4000 mm with heater lamps and timer. 415 volt Plug-in.
  • Radial Arm Saw - HR Cousins 'Supersaw' on Metal Stand. Fasco 1500 RPM, 1500 watt, 240 volt Plug-in Motor. Fabricated timber in / out feed table.
  • Auto Planer - Model Tap-15 15 inch auto planer Mfg 1988, S/n 50042. Made in Taiwan. 2 Hp motor, 240 volt Plug-in.
  • Hinge Borer - Hettich 3 head Borer fitted with a 400 mm edge guide, Pneumatic rise and fall and hold downs. 415 volt Plug-in.
  • Multi Borer - No brand visible 5 Head Overhead multi borer with stop gauges, Pneumatic connections for rise and fall and hold downs, 415 volt Plug-in.
  • Stationary Air Compressor- Brand not visible, Twin Cylinder Belt driven with 415 volt Plug-in motor on Horizontal air tank 400 mm dia. x approx. 1000 mm. Metal Floor stand. Note: Purchaser should ensure this item is inspected in accordance with AS/NZS 3788 Pressure Equipment in-service inspection prior to use.
  • Concrete Mixer - Lightburn brand with metal wheels. 240 volt Plug-in.
  • Generator - Honda GX340 motor, 11 Hp 4 stroke petrol with Electronic Ignition and generator model APH5.8RSI S/n 63140 5.8 KVA, 2 x 240 volt output plugs all in metal Carry Frame.
  • Wacker Packer - Plate Compactor fitted with 5 Hp Honda GX140 4 stroke motor with Electronic ignition and Oil Alert. Plate size approx. 600 x 460 mm.
  • Brick Saw - Cemtoll with 360 mm Diamond tip segmented blade. Water connection and water trough. 240 volt Plug-in.
  • Overhead Router - Samco Mini Router B Made in Italy No. 6401857, 415 volt Plug-in. Pneumatic air connection, Bench mounted Stand, Foot control, Plus Steel Framed Bench and a Quantity of Router Bits and Cutters.
  • Horizontal Band Saw - 'Barron' brand Dry cut, Hand operated material hold down clamping, Cast Iron stand with 2 x castor wheels. 415 volt Plug-in. Plus 2 x Roller support stands.
  • Metal cutting Drop Saw - Elu Aluminium cut off saw with 0-45 deg mitre, Metal Blade, Pneumatic material hold downs with RHS Material Table and Adjustable stop. Cabinet Base 415 volt Plug-in.
  • Bench Grinder - Older style Heavy Duty with Belt drive fitted with 1 x 50 x 300 mm dia. Stone wheel and 1 x 40 x 300 mm Wire wheel on cast iron stand. 415 volt Plug-in.
  • Shop Press - Fitted with 12 ton manual Hydraulic Jack. Height adjustable Metal Stand.
  • Bench Drill - Kira brand 4 speed. Bench mounted fitted with a 0.5 inch Albrecht Chuck. Height adjustable table 240 volt Plug-in. Plus Machine Vice with 150 mm Jaws.
  • Engineers Vice - 2 way swivel action, 150 mm Jaws.
  • Metal Cut off Saw and Bench - Ryobi model CS14 240 volt Plug-in Plus H/D Metal Bench size approx. 1560 x 900 x 920 mm.
  • Bench Grinder with Linisher - 'Master of Machinery Model BG6 fitted with 0.5 Hp motor 2850 RPM 240 volt Plug-in.
  • Welder - WIA Weldmatic 205S with Wire Feed controls, Gas Regulator, Leads and Handpiece on Fabricated Trolley. Note: Gas Bottle Not Included.
  • Concrete Saw - Diesel powered Pedestrian Concrete Saw with Water Inlet and Hoses. No specifications visible.
  • Welder - Weldmaster TIG 200 PAC/DC with Regulator, Leads and Handpiece. 240 volt Plug-in.
  • Concrete Trowling Machine - Master Finisher 4 blade Trowling machine S/n 14755 fitted with a Robin brand Motor model EY20D 5Hp, stroke.
  • Drop Saw - Alice metal cutting Mitre Saw Made in Italy fitted with a 260 mm Metal Blade, Bench Top Type. 240 volt Plug-in.
  • Slide Compound Saw - Hitachi model C8FB. Bench Top Type. 240 volt Plug-in.
  • Slide Compound Saw - Hitachi model C8FB. Bench Top Type. 240 volt Plug-in.
  • Container - 20 Foot container with Timber floor. Said to have no leaks. Inspection Recommended. . (Loc: Yard area.)
  • Air Compressor - Peerless Air Compressor - 3 Cylinder Belt Drive on Horizontal Receiving Tank 415 volt Hard Wired. Note: Purchaser should ensure this item is inspected in accordance with AS/NZS 3788 Pressure Equipment in-service inspection prior to use. Note: This item is hard wired and it is the purchasers responsibility to ensure the electricity is professionally disconnected and the asset made innert prior to removal.
  • Qty 3 x individual Bays of Pallet Racking - Brand unknown, comprising the following - Rack 1: 2 x end frames 1220 x 3050 mm (H), and 11 x Load Beams approx. 3040 x 115 x 50 mm, Rack 2: 2 x End Frames approx. 1230 x 2130 mm (H) and 4 Load beams 1800 x 80 x 45, and Rack 3: 2 End Frames 1230 x 2130 mm (H) and 6 Load beams 1800 x 80 x 45 mm.
  • Pair Extended Tines - approx. 1500 mm Long.

Hand Tools & Workshop Equipment

Hand Tools & Workshop Equipment
  • Hammer Gun - Hitachi model 65SB in metal carry box. 1 x Chisel Point. 240 volt Plug-in.
  • Reciprocating Saw - DW304-46VS 2 speed in PVC Carry case. 240 volt Plug-in.
  • Rotary Hammer Drill - Hilti model TE22. 520 watts 240 volts Plug-in. PVC carry case.
  • Rotary Hammer Drill - Ramset Dynadrill model 1342 in carry case. 240 volt Plug-in.
  • Quanty 2 x Strapping Coil Holders and Hand clamping tools
  • Quantity Concrete Core cutting Equipment - including Dimas model N1485 Diamond Core Drill DDK-350 240 volt Plug-in and Quantity of Diamond Tipped Core Cutters all in metal carry case on H/D Dolly trolley.
  • masonry Saw - Stihl model TS460, 2 stroke petrol motor, water feed attachment, 360 mm Diamond Tipped segmented Blade.
  • Hammer Gun - Hitachi model H55SA 240 volt Plug-in with carry case and qty mixed chisel and points.
  • Portable Ventilator - Unbranded, Model SD-S30 approx. 300 mm Dia., 2 speed, 450 / 550 watts, 2900 / 3300 RPM, Flow Rate 62 / 72 M³/Min. Plus approx. 12 Mtr Expandable Flexible Hose.
  • Quantity 2 x Pneumatic Nail Guns - including 1 x Plaslode 38-64 mm Framing Gun and 1 x unbranded 38-64 mm
  • Router - Makita model 3612. 240 volt Plug-in.
  • Router - Makita model 3612. 240 volt Plug-in. Fitted with modified base.
  • Router - Makita (model not visible), 240 volt Plug-in.
  • Trimmer - Ryobi ¼ inch 240 volt Plug-in. Note: Casing appears to be damaged.
  • Biscuit Cutter, Orbital Sander and Heat Gun - Lamello Biscuit Cutter (Swiss made) type D 7640H. and 1 x Orbital Sander (unbranded), and 1 x Ryobi Heat gun, all 240 volt Plug-in.
  • Quantity 4 x assorted Pneumatic Finish Nail Guns - including 2 x assorted Bostich and 2 x Unbranded.
  • Quantity 3 x assorted Pneumatic Staple Guns.
  • Quantity 5 x assorted Pneumatic Drill drivers including 3 x Puma brand.
  • Quantity 3 x Pneumatic Screw Drivers
  • Quantity 3 x Pneumatic Drill drivers.
  • Large Industrial Fan - Dynabreeze mounted on metal frame with 2 x castor wheels. 970 mm dia..
  • Wheel Barrow - Builders barrow steel legs and tray, timber handles. Some concrete splatter residue.
  • Wheel Barrow - Builders Barrow Kelso brand, steel legs and tray, metal handles. Some concrete splatter residue.
  • Quantity 2 x Lengths of Compressor Jack Hammer Hose.
  • Pipe Bender - Manual Pipe Bender to suit High Tensile Pipe, 8 x Curve formers, 16 ton Hydraulic Jack.

Large Qty of Doors and Locks

Large Qty of Doors and Locks
  • Feature Door - Three Panel Panoramic door comprising 1 x Opening Door and 2 x Bi-fold Doors Finished size 2396 mm wide x 2090 mm (H). Fitted with safe glass and includes door hardware including Locks, hinges, Tracks and Frame. ORP $3148.00. Buyers note: Display unit, buyer to dismantle. Tools and adequate manpower required.
  • Entry Door - Model E016BM, size approx. 2040 x 820 x 40 mm featuring 4 x Inlay panels. Stained finish.
  • Entry Door - Model E08BBL9, size approx. 2040 x 820 x 40 mm featuring 4 x Inlay Panels and Brass light Glass panel. Stained one side only. Orp $568.00.
  • Entry Door - Model E17BLM4D , size approx. 2040 x 820 x 40 mm featuring 4 x Inlayed panels and 2 x Lead light panels, stained finish. ORP $800.00.
  • Entry Door - Model E29B , size approx. 2040 x 820 x 40 mm featuring 4 x Inlay panels, ORP $404.00.
  • Entry Door - Model EZ7B , size approx. 2040 x 820 x 40 mm featuring 7 x inlay panels. ORP $574.00.
  • Entry Door - Model ED16 GBMTGLLMLDT / G IMP L/L, size approx. 2040 x 820 x 40 mm featuring 2 x Inlay Panels and 2 x Lead light panels. ORP $1471.00
  • Entry Door - Model E016GBRJ, size approx. 2040 x 820 x 40 mm featuring 2 x Inlay Panels and 2 x Lead Light Panels with a Rose pattern. ORP $666.00.
  • Entry Door - Model E28BMDR, size approx. 2040 x 820 x 40 mm featuring 2 Inlay panels and 2 x Lead light Panels. ORP $1194.00.
  • Entry Door - Victorian style Model E12GBVI, size approx. 2040 x 820 x 40 mm featuring 2 x Inlay Panels and 9 x Glass panels. ORP $775.00.
  • Entry Door - Model E18B, size approx. 2040 x 820 x 40 mm featuring 6 x Inlay Panels. ORP 392.00.
  • Entry Door - Model EZBR, size approx. 2040 x 820 x 40 mm featuring 4 x Inlay Panels. ORP $635.00.
  • Entry Door - Model EZ2b , size approx. 2040 x 820 x 40 mm featuring 2 x Inlay Panels. ORP $524.00.
  • Entry Door - Model E)18Q, size approx. 2040 x 820 x 40 mm featuring 4 x Inlay Panels. ORP $714.00.
  • Entry Door - Model 18BD, size approx. 2040 x 820 x 40 mm featuring 6 x Inlay Panels. ORP $392.00.
  • Entry Door - Model E29BM, size approx. 2040 x 820 x 40 mm featuring 4 x Inlay Panels ORP $653.00.
  • Entry Door - Model E07BGC, size approx. 2040 x 820 x 40 mm featuring 4 x Glass Panel Fan shape Inlay ORP $521 (reduced to $299.00).
  • Entry Door - Model E18BM, size approx. 2040 x 820 x 40 mm featuring 6 x Inlay Panels ORP $664.00.
  • Entry Door - Model E23B, size approx. 2040 x 820 x 40 mm featuring 8 x Panel Inlay. ORP $424.00
  • Entry Door - Model E23BQD, size approx. 2040 x 820 x 40 mm featuring 8 x Inlay Panels. ORP $886.00.
  • Quantity 3 x assorted Entry Door - Size all 2040 x 820 x 40 mm comprising 1 x 9 Glass Panel inlay with 2 x timber inlays, ORP B$359.00., and 1 x Painted door with curved Routered Pattern ORP $84.00, and 1 x 4 Panel Door ORP $387.00.
  • Entry Door - Size approx. 2040 x 820 x 40 mm featuring 2 x Inlay Panels and 1 x Large Lead light panel section ORP $1038.00 (reduced to $775.00.
  • Quantity 2 x Entry Doors - including Model 1016B , size approx. 2040 x 820 x 40 mm featuring 4 x Panel inlay, and 1 x Model IDVBD, same size featuring 4 x Inlay panels ORP $239.00.
  • Quantity 4 x Doors - Various Models, size approx. 2040 x 820 x 40 mm including 1 x Blue Painted with 4 x Glass Panels ORP $618.00, 1 x 6 Inlay panel Door in unfinished MDF ORP $159.00, 1 x Door with Mirror Glass Panel ORP $431.00, and 1 x 10 Glass Panel door ORP $552.00
  • Quantity 9 x assorted Internal and Exterior Doors all 2040 x 840 Total ORP approx. $1200 Lot
  • Entry Door - Model EZ40BCL, size approx. 2040 x 820 x 40 mm featuring 4 x Glass Panels ORP $649.00.
  • Entry Door - Model E16BBL4, size approx. 2040 x 820 x 40 mm featuring  2 x Inlays and 1 x large Brass light Glass Panel. ORP $815.00.
  • Entry Door - Model EF19BVE, size approx. 2040 x 820 x 40 mm featuring Double Glazing with internal Venetian Blind, Undercoat finish. ORP $752.00.
  • Entry Door - Model E02BTGL4 , size approx. 2040 x 820 x 40 mm featuring 2 x Inlay Panels and 2 x Double Glazed Lead light Glass Panels. ORP $827.00.
  • Entry Door - Model E07BGC, size approx. 2040 x 820 x 40 mm featuring 4 x Inlay Panels and 1 x fan shape Glass Panel
  • Quantity 2 x Entry Doors - comprising 1 x Model E23B, size approx. 2040 x 820 x 40 mm featuring x Inlay Panels, and 1 x Model E194BAC, same size featuring 3 x Glass Panels ORP $847.00.
  • Quantity 2 x Entry Doors - comprising 1 x Model EZ58 , size approx. 2040 x 820 x 40 mm featuring 5 Inlay panels $524.00, and 1 x Model EL1BTLA9 same size featuring 1 x Long side Glass Panel. ORP $419.00.
  • Quantity 6 x assorted Doors - Size approx. 2040 x 820 mm comprising 1 with 7 x Glass Panels, ORP $359.00, 1 x Blue Painted Door ORP $294.00, 1 x Undercoated Door with a Router pattern ORP $294.00, and 1 x Undercoated door with 4 x Square Routered Panels ORP $322.00., 1 x 2 Glass Panel door ORP $359.00, and 1 x door with a Single Long Glass Panel ORP $497.00
  • Quantity 4 x Entry Doors - All approx.  2040 x 820 x 40 mm comprising 1 x door with 2 Inlay panels and 2 x Glass Lead light Panels ORP $359.00, 1 x Undercoated door with long side Glass Panel ORP $497.00, 1 x Undercoated with Curved Glass Panel ORP $512.00, and 1 x door with 4 x Inlay Panels ORP $567.00.
  • Entry Door - Model E02BME, size approx. 2040 x 820 x 40 mm featuring 2 x Inlay panels and 2 x Glass Panels ORP $694.00.
  • Entry Door - Model E82GBOX, size approx. 2040 x 820 x 40 mm featuring 4 x Timber and 1 x Glass Panel ORP $634.00.
  • Entry Door - Model E82GBGA, size approx. 2040 x 820 x 40 mm featuring 4 x Timber and 1 x Glass Panel ORP $634.00.
  • Entry Door - Model E8GBRJ, size approx. 2040 x 820 x 40 mm featuring 4 x Timber and 1 x Lead light Glass Panel ORP $552.00.
  • Entry Door - Model EZ50BAC, size approx. 2040 x 820 x 40 mm featuring 5 Glass Panels. ORP $769.00
  • Quantity 4 x Doors - All Undercoated, Mixed styles , size approx. 2040 x 820 mm ORP approx. $1300.00 .Lot.
  • Entry Door - Model E99BBL9, size approx. 2040 x 820 x 40 mm featuring Oval Brass light Glass Panel. ORP $1229 (reduced as floor stock to $600.00).
  • Quantity 3 x assorted Doors - Size approx. 2040 x 820 mm all with Glass Panels. ORP $1800.00 Lot.
  • Quantity 3 x assorted Doors - Size approx. 2040 x 820 mm all with Glass Panels. ORP $1700.00 Lot.
  • Quantity 3 x assorted Doors - Size approx. 2040 x 820 mm all with Glass Panels. ORP $1700.00 Lot.
  • Quantity 3 x assorted Doors - Size approx. 2040 x 820 x 40 mm all with Glass Panels. ORP $1600.00
  • Quantity 2 x Entry Doors - Size approx. 2040 x 820 x 40 mm featuring 1 with 9 x Glass Panels and 1 with Glass Fan panel. ORP $1300.00 Lot.
  • Quantity 3 x Entry Doors - Model , size approx. 2040 x 820 x 40 mm featuring 2 with Full size Glass Panels and 1 with 4 x Glass Panels. ORP $1700.00.
  • Quantity 2 x Entry Doors - Size approx. 2040 x 820 x 40 mm featuring 1 with 5 x Inlay Panels and 1 with 4 x Inlay Panels and a Glass Fan Panel. ORP $1200.00.
  • Quantity 2 x Folding Doors each 2000 x 800 mm including 1 x Beige colour PVC and 1 x Timber finish in Display stand. Buyers Note: Tools required to dismantle.
  • Quantity 2 x Sliding Mirror Faced (Not matching) ORP $860.00 Lot.
  • Quantity 11 x assorted entry Doors, size approx. 2040 x 840, all with Glass Panels. ORP $2189.00 Lot.
  • Door Locks - Quantity 11 x 'Forte' brand assorted Door Entry Locks, Mixed Silver and Gold colours. ORP approx. $900.00 Lot.
  • Door Locks - Quantity 8 x 'Forte' brand assorted Passage Set Locks. ORP approx. $400.00 Lot.
  • Door Locks - Quantity 7 x 'Forte' brand Privacy sets. ORP $420.00 Lot.
  • Door Locks - Quantity 5 x 'Dura' Brand Entry Sets including 1 with Deadbolt, and 1 x 'Infinity' brand Leaver Combo Set.
  • Door Locks - Quantity 6 x Bed and Bath Privacy Sets, mixed colours, ORP $170.00 Lot and 6 x Closet and Hall sets ORP $150 Lot.
  • Quantity door locks and Handles - Various styles and types.
  • Laundry Cabinet - Prestige Laundry Cabinet with twin Tubs and Flick Tap. Ceaser Stone Quartz Top and Sides. Size approx. 1100 x 800 x 920 mm (H). Note: Buyer will need to dismantle, panels will be heavy.
  • Kitchen Bench - 5 door Laminated Cabinet approx. 2700 x 350 x 900 mm (H). Note: Ex-display, door colours vary.
  • Kitchen Sink Unit - comprising 4 door and 4 drawer Laminated Cabinet with Double Sink Unit and Flick Tap. Size approx. 2230 x 600 x 890 mm (H).
  • Corner Kitchen Cabinet Unit - with Double Sink and Flick Tap. 6 x Doors and single Drawer Section. Beech colour Laminate doors and Stone Look Bench Top. Size approx. 2270 mm (Section with sink), and 2050 mm.
  • Electric Wall Oven and Cabinet - (Ex-display) Oven has top grill element and 2 x wire shelves, Stainless Steel finish 240 volt (Must be Hardwired), with Cabinet Unit, Timber Grain laminate finish, 2 x Drawers, Open section for Microwave, and 2 door cupboard. Sixes - Oven approx 600 x 600 mm (H), and Cabinet ^35 x 600 x 2200 mm (H).

Office Furniture & IT Equipment

Office Furniture & IT Equipment
  • Office Desk - Beech Colour Laminate Top with Charcoal colour base. Size approx. 1800 x 900 mm Plus 3 x Drawer under desk pedestal Cabinet, Plus 2 Door Cabinet with 2 tier Bookshelf above. Size approx. 900 x 450 x 1800 mm (H).
  • Filing Cabinet - 3 Drawer Beech Colour Laminate finish with Charcoal colour sides.
  • Credenza -  x sliding doors, Beech colour laminate with Charcoal colour sides.
  • Corner Desk with LHS Return section - Beech colour top with Charcoal colour base. Size approx. 1800 x 1800 mm.
  • Corner Desk with LHS Return section - Beech colour top with Charcoal colour base. Size approx. 1800 x 1800 mm.
  • Filing Cabinet - 3 Drawer Beech Colour Laminate finish with Charcoal colour sides.
  • Filing Cabinet - 3 Drawer Beech Colour Laminate finish with Charcoal colour sides.
  • Credenza with Bookcase Hutch Top - Beech colour laminate finish with Charcoal colour sides, 2 sliding Doors (One missing) with 3 Tier Bookcase above. Overall size approx. 1800 x 1800 mm
  • Storage Cabinet -Bottom Credenza section with 2 sliding doors in Grey Laminate with Bookcase section above in Beech colour laminate with charcoal Colour Sides. Overall size approx. 1800 x 1800 mm.
  • Clerical Arm Chair - Grey fabric upholstery with gas lift and mobile base.
  • Clerical Arm Chair - Grey fabric upholstery with gas lift and mobile base.
  • Clerical Arm Chair - Medium Back with Black Leatherette upholstery with gas lift and mobile base.
  • Clerical Arm Chair - Medium Back with Black Leatherette upholstery with gas lift and mobile base.
  • Tower Computer - Clone Tower computer with Intl P4 processor. Specifications not available Plus Dell Widescreen 19 inch Monitor and Wireless Keyboard and Mouse. 240 volt Plug-in.
  • Tower Computer - Dell Definition 3000 with Intel P4 Processor. Specifications not known. Plus Polyview 19 inch Flat Screen Monitor, wireless Keyboard.
  • Tower Computer - Clone Tower Computer with Intel P4 Processor, No Specifications available, Plus Dell 19 inch Monitor, Keyboard and Mouse.
  • Tower Computer - Clone Tower Computer, No Specifications available, Plus Sony Monitor, Keyboard and Mouse.
  • All in One Printer - harp model AR-M160. Fax / Scan / Copy / Print. Single Paper tray. 240 volt Plug-in.
  • All in One Printer - Brother MFC8460n, Fax / Scan / Copy / Print, ADF. Single Paper Tray. 240 volt Plug-in.
  • Quantity 2 x Client Chairs -Black leatherette on Black Canterlever Frame.
  • Water Feature - Stainless steel and Glass, Size approx. 900 x 1600 mm (H)
  • Quantity office accessories comprising 1 x Ceramic Urn (missing handle) with Artificial Plants, 1 x Cane Urn with Artificial Plants, and 1 x Painting on Stretched Canvas.
  • Telephone system - Commander with approx. 4 x Standard Key stations 760/40.
  • Meeting Room Table - Beech colour Laminate finish, approx. 1200 mm dia
  • Desk - Beech colour Laminate finish, approx. 1800 x 900 mm
  • Corner Office Desk - Beech Colour Laminate top on Charcoal colour base with LHS Return section. Size approx. 1800 x 1800 mm, and 3 Drawer under desk Pedestal Cabinet
  • Credenza Unit - 2 Sliding Doors with Bookcase section above. Beech colour laminate finish with Charcoal colour sides. Size overall approx. 1800 x 1800 mm
  • Clerical Chair - High Back with Grey fabric upholstery with Gas lift and Mobile base.
  • Quantity 2 x Tub Chairs - Brown Micro suede fabric upholstery
  • Small Lunch room Table and 4 x Chairs
  • Refrigerator - Two Door Upside Down Fridge / Freezer, Westinghouse Aurora 410 Ltr. 240 volt Plug-in
  • Microwave Oven - Midea brand with Stainless steel finish. 240 volt Plug-in
  • Pedestal Fan and Screen Panel and Oil filled Column Heater 240 volt Plug-in

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

For example:

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection

Inspection
  • Inspection of the assets is highly recommended.
  • Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

  • Monday 2nd April between 10.00am & 4.00pm

Location: Unit 2, 9-11 White St, Dubbo NSW

Asset Collection Post Auction

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

  • Tuesday 10th April between 9.00am & 4.00pm
  • Wednesday 11th April between 9.00am & 4.00pm

Location: Unit 2, 9-11 White St, Dubbo NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

  • Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
  • Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
W.O - BOURKE NSW03/04/2012 2.26.34 PM AESTAU$6891103/04/2012 11.24.11 AM AEST
T.O - ORMEAU QLD03/04/2012 2.26.34 PM AESTAU$6191029/03/2012 10.08.49 PM AEDT
B.B - Dubbo NSW03/04/2012 11.24.11 AM AESTAU$3091029/03/2012 4.36.22 PM AEDT
T.M - YOUNG NSW02/04/2012 5.25.32 PM AESTAU$2991002/04/2012 5.25.11 PM AEST
C.T - Chipping Norton NSW01/04/2012 4.27.08 PM AESTAU$2291001/04/2012 4.26.56 PM AEST
C.B - Dubbo NSW30/03/2012 2.05.08 PM AEDTAU$1991030/03/2012 2.05.08 PM AEDT
J.W - MUDGEE NSW29/03/2012 9.33.17 PM AEDTAU$1791029/03/2012 9.09.11 PM AEDT
D.C - Bathurst NSW29/03/2012 9.33.12 PM AEDTAU$1691029/03/2012 9.07.23 PM AEDT
S.C - yarramundi NSW29/03/2012 9.23.06 PM AEDTAU$1291029/03/2012 9.23.06 PM AEDT
z.t - putney NSW29/03/2012 8.44.04 PM AEDTAU$291029/03/2012 8.44.04 PM AEDT
J.M - HELENSBURGH NSW29/03/2012 5.41.28 PM AEDTAU$191029/03/2012 5.41.28 PM AEDT
View all Industrial Sales