Save up to 90% on Fashion, Accessories & Homewares
5

Floor polisher, AL Cook Technology, Alto model NIBBCU-21`` KAW17BAT, LPG po

$209

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 13/03/2012 7.15 PM AEDT

  • Deliver to: Pickup Only NSW
  • Location: Yagoona, NSW
  • Support: Natalie Welzel or (p) 02 9112 9457

Description

Floor polisher, AL Cook Technology, Alto model NIBBCU-21`` KAW17BAT, LPG powered by Kawasaki FH 500W motor, approximately 530mm diameter brush, key start. Asset located at 85 Rookwood Road (Corner of Brunker Road), Yagoona NSW. (169342-24)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Report

Conditions Of Sale

Conditions Of Sale

This Sale is Pick Up Only from Yagoona, NSW

These Assets are Used, therefore Inspection is Highly Recommended Prior to Bidding, Description & Photos Should Be Used as a Guide Only

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

ALL ASSETS IN THIS SALE ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

BUYERS PLEASE NOTE:

  • Collection of assets is the responsibility of the purchaser.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have people to help you load your items and right transport.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Pick ups are not allowed outside of the dates/times specified.

Catering Equipment

Catering Equipment
  • Combi oven, Convotherm, model 4/0015KIT, "40 tray size", stainless steel interior and exterior, dial and touch panel control, approximately 1150x840x1880(H)mm, 415V.
  • Refrigerated cake display cabinet, Tecfrigo Innova 1000, self contained  refrigeration system, anodised aluminium frame, glass inserts on stainless steel base, internal lighting, twin rotating display turntables approximately 570mm diameter each with provision for 6 shelves, overall unit approximately 1320x700x1750(H)mm, mobile, 240V plug in, temperature control and indicator. Note: only four glass shelves available, missing door handles, missing 2 castors.Display fridge, Store Fixtures and Food Equipments, model MCD-20 TM, 2 glass front doors, self contained refrigeration, digital temperature control and display, white painted metal cabinet, 8x plastic coated wire shelves 240V, approximately 1200x630x2000(H)mm.
  • Twin wok burner, B&S Commercial Kitchen Appliances, model CCF-2, free-standing, stainless steel, natural gas approximately 1150x900x800/1450(H)mm.
  • Double skin boiler, Angelopo, gas fired, stainless steel construction, bowl size approximately 600 diameter x 430mm overall dimension approximately 800x1000x1100(H)mm. 
  • Soup boiler, stainless steel construction, bowl approximately 560 diameter x 460mm on legs, gas fired.
  • Soft serve ice-cream machine, Carpigiani, stainless steel, 2-flavour, 3-lever server, mobile, approximately 560x870x1570(H)mm, 415V plug in.
  • Mobile combination cabinet/steamer, stainless steel construction, 2-tier 2-door under bench cupboard, stainless steel frame glass partition, collapsible front shelf and twin compartment removable gas heated pot with single steamer tray approximately 460 diameter x 410mm, overall dimensions approximately 1550x1100x800/1500(H)mm.
  • Commercial dishwasher, Hobart, model FM.30.A, side entry, stainless steel, 240V.
  • Glass washer, Hobart model GWI.AS, stainless steel, bench mount, front entry, 240V.
  • Commercial gas stove, Industrial Malper, 4 burner, griddle, Salamander, oven, approximately 1240x850x930(H)mm.
  • Commercial gas stove, Garland, 2x solid metal pot heaters, oven, approximately 890x900x840(H)mm.

Restaurant/Cafe Furniture

Restaurant/Cafe Furniture
  • 4 person table and chair setting, fixed, metal frame, wooden edge laminate table, poly seat with metal tube backrest, table size approximately 1100x600mm overall size approximately 1500x1100mm.
  • 5 piece table and chair setting, including: 1 x table rose wood coloured top approximately 800x800mm on black round metal pedestal base and 4x stained wooden slab chairs.
  • 3 piece table and chair setting, including: 1 x wooden top table approximately 700mm diameter with 3 steel silver legs and 2x stained wooden slab chairs.
  • 3 piece bar table and stool set, including: 1x table 750mm diameter stained MDF table on black metal base, 2x stools black vinyl seat and back rest on metal frame and legs.
  • Visitors armchair, cantilever style, blue fabric seat and backrest, vinyl armrest, metal frame.
  • 2x stools, black vinyl seat and backrest, chrome frame and pedestal base, wooden armrest, gas lift height adjustable. Note: seat and backrests show evidence of wear.
  • 3-piece café setting including: 1x 600mm chrome diameter metal framed glass top and 2x chrome plated frame and legs with plastic combined seat and backrest with padded fabric inserts.
  • 4x client chairs, chrome metal frame and legs, brown fabric seat and back rest.
  • 4x swivel chairs, plastic base and chair, chair coved in padded grey fabric.

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

For example: 

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50 + 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invoices exceeding $5000 may also be made onsite via bank cheque. Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Online Auction Closing

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times

  • Monday 12th of March between 9:00am & 4:00pm

Location:

85 Rookwood Road (Corner of Brunker Road), Yagoona NSW

Asset Collection Post Auction

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

  • Thursday 15th of March between 9:00am & 4:00pm
  • Friday 16th of March between 9:00am & 4:00pm

Location:

85 Rookwood Road (Corner of Brunker Road) Yagoona, NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting Grays staff to release your purchases to the third party.

Please Note:

  • Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
  • Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

Third Party Pick Up

Third Party Pick Up

OH&S

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale will require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
K.V - Canterbury NSW13/03/2012 7.05.55 PM AEDTAU$2091113/03/2012 7.40.43 AM AEDT
I.S - Jilliby NSW13/03/2012 10.40.15 AM AEDTAU$2091013/03/2012 10.39.41 AM AEDT
R.H - Matraville NSW12/03/2012 7.11.55 PM AEDTAU$1191012/03/2012 7.11.55 PM AEDT
M.S - Camden NSW08/03/2012 8.56.19 PM AEDTAU$1091008/03/2012 8.54.55 PM AEDT
G.Z - Revesby NSW08/03/2012 8.56.09 PM AEDTAU$991008/03/2012 5.03.41 PM AEDT
n.s - kings park NSW08/03/2012 6.40.27 PM AEDTAU$291008/03/2012 6.40.27 PM AEDT
o.a - cabramatta NSW08/03/2012 5.13.40 PM AEDTAU$191008/03/2012 5.13.40 PM AEDT
View all Industrial Sales