THOMPSON CROWN OFFSET PRINTING PRESS

THIS SALE IS PICK UP ONLY FROM VARIOUS ADDRESSES IN SOUTH AUSTRALIA.

These Assets are Used, therefore Inspection is highly Recommended Prior to Bidding. Description & Photos Should Be Used as a Guide Only

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% & 10% GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

• Mitsubishi Forklift, 2FBC25, Battery Electric, 3 Stage mast, Side Shift, Max. Height Lift 6000mm, Max. Lift Weight 1850Kgs
• Bale Press, Motorised, 3 Phase, Electric Over Hydraulic, Single Ram, 7.5Kw
• Komatsu FG25T-14 2.5 ton forklift, 3502 hours, 2003 delivery, 4000mm lift height, New pneumatic tyres, 2 stage free view mast
• Mitsubishi FG35, 3.5 ton forklift, 8253 engine hours, June 1992, Model F29A, Solid tyres, 3700mm lift Height, 2 stage free view mast
• Mitsubishi FG30 3 ton forklift, Model F13D, Engine hours from 4154 hours, March 2001 delivery, 3500mm lifting height, New pneumatic tyres, 2 stage free view mast with side shift
• Komatsu FG25HT-14 2.5 ton forklift, Serial no. 568037, July 2004, 4m lift height, 2 stage free view mast with side shifting carriage, Pneumatic tyres, 3871 engine hours
• Komatsu FG25HT-14 2.5 ton forklift, Serial no. 564995, March 2003, 4m lift height, 2 stage free view mast with side shifting carriage, Pneumatic tyres, 4498 engine hours

• Atom Ride On Floor Sweeper, Lpg, Powered By Honda GC 160 Engine, 5 HP
• Ulma Stretch Wrapper , Model Super Chik, Ser 1568
• 4 x Box freight trailer, single axle, 10 stud rims with Stemco hubodometer, heavy duty drawbar, ringfeeder compatible hitch, double rear doors, checkerplate deck, internal mesh gates, rear step, air brakes, chains, manual wind jockey wheels, spare wheel, box measures approximately 3660 x 2450 x 2450mm (h) (3000 to ground)
• Isuzi Truck, 84 Pantech Furniture Box, Engine # 6BD1391666, GVM/GTM 12980, GCM 18500,
• Mitsubishi Truck, Turbo Diesel, 82, Pantech Furniture Box, 8 Tonne, twin axle, Engine is 15 Months since exchange, 5 Speed Manual, New Front Springs, engine No. 6D16796632, GVM/GTM 12000, GCM 22000

• Bipel Plastic Injection Moulding Machine, Type 23/17
• Okuma CNC Lathe, Model LB15, Spindle Speed 3500rpm, 8" Chuck, 45mm Spindle Bore, Serial # 5911-1852, Okuma OSP500L Controller (Controller Panel Replaced Approximately 2 Years Ago), Enomoto Chip Conveyor, Serial # 14836, Approximately 1984,
• John Heine Power Press, No. 70A, Motorised, 3 Phase, 2HP, Belt Drive
• King rich milling machine, Model KR-V3000, Serial no. 4924, Multi speed with digital D-ANN read out, 3.75kw, With vice, 3 phase, Bed size 1220mm
• Euro source milling machine, Model 4VS-SQ, Serial no. 94474, Spindle speed, 455-3500R.P.M, 550-4300 R.P.M, 3 phase, With vice
• Extron Milling Machine, Model K5V, Year 1998, Serial no. K5V-229, 3 phase, With Fagor digital display, Multi speed
• Toptec milling machine, Model 7VS, 315 volt, 3 phase, 2001 manufactured, Sohz-50-410, 60Hz - 50-500, 455-3500 R.P.M, 500-4300 R.P.M., Spindle speed

• (Antique Model) The Challenge Machinery Pedal Operated Platten Press, A4
• Thompson Crown Offset Printing Press, 240 Volt, 520 x 390mm Sheets, Got Manuals, Could Be Used For Ideal Vanishing
• Lot Comprising of Approx. 1000 Assorted Sheets Of Screen Printing Vinyl Paper, Some Adhesive, 760 x 1000mm
• Linotype Hell Image Setter, Herkules, A2, 3 Phase, Delta Rip, Bridge, With Glunz And Jensen Online Processor,
• Anitec Plate Processor, Model S26, 240 Volt, On Fabricated Steel Stand, Serial No. 4206/T11
• Parker UV Plate Exposure Unit, A1 Size, 3 Phase, 1 KW With Vacuum Control, Timer Control,
• Heidelberg Bacher Control 2000 Register System Plate Punch, Type 2045, On Fabricated Steel Stand
• HP Indigo E Print 1000 Digital Offset Colour Press, S/N 3600, 4 Colour Postscript, Level 2 Black Personalization

• Detroit Diesel Marine Diesel Engine, Series 92, 6V92TA, 9 Liter, 6 Cylinder, V Block, Fuel, Injected Garret Turbo Charger, 550HP, Water Cooled, Unit Rebuilt Approx. 12 Months Ago By Q Marine Pt. Lincoln SA, And Has Done Approx. 10 Hours Since Rebuild
• Detroit Diesel Marine Diesel Engine, Series 92, 6V92TA, 9 Liter, 6 Cylinder, V Block, Fuel, Injected Garret Turbo Charger, 550HP, Water Cooled, Unit Has Been Rebuilt And Done Approx. 300 Hours Since Rebuild,

• Pro Klee Portable Paint Mixer
• Elbenstock Handheld Paint Mixer,
• Flextool Petrol Flexdrive Motor, Pull Start, Powered by Robin Subaru Motor, Model RD37
• Makita Heavy Electric Hammer, Model HMI800
• Crommilins Vibrating Plate, Model TKP90, Serial No. A2106. Powered By a 5.0HP Petrol Robin Model No. EY203
• Hitachi Heavy Electric Hammer, Model H905B
• Aussie Pressure Washer, Model No. WEL744
• Aussie Pump Pressure Washer, Model BB100CK, Serial No. G00266498, Powered by 183cc Robin Petrol Engine With Pull Start
• Flextool Rammer Plate Compactor, Model PC36, Serial No. 3276, Powered by 3.5Hp Robin Petrol Engine With Pull Start

• Linmac BHB Tractor Crane, 10 Tonne, Powered by a John Deere 4 Cylinder Diesel Engine, 4239DF
• Proline Champion Industrial Tractor Crane, MK3, 8 Tonne, Model 86C, Powered by a 4 Cylinder Diesel Engine, Maximum Lift Height 15Ft, Max. 25 Inch Jib Length,
• 1988 Ford Cargo 1313 Crane Truck, GVM/GTM 13060, GCM 20300, with Flat Bed 6 Ton Tray, Dual Axle, Showing 83477km

This Sale is GST EXCLUSIVE.

This Sale has a 13.5% Buyers Premium + 10% GST

ie Successful Bid Price is $100: + 13.5% Buyers Premium + 10% GST= Invoice Total of $124.85

Product Condition: Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment: Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invocies exceeding $5000 may also be made onsite via bank cheque. Contact Jodie.wallis@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

Any payment enquiries, Please contact Jodie Wallis on (03) 8552 4444 or at Jodie.wallis@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.

If you are unsure do not bid as no refunds will be given.

Inspection of these assets can be made on

By Appointment Only With Project Manager - Michael Bray on 0407 867 082. Check Each Lot Description For Addresses.

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

The pickup is at different locations in South Australia. Check each lot description for addresses. . Pick ups are not allowed outside of the dates/times listed below.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid. Goods can only be released with the correct information being supplied which includes Sale number, Lot number/s and Buyers name

Any items remaining uncollected after the nominated collection times will be deemed abandoned

Assets can be Monday 25th May 2009, between 8.30am and 4.30pm. To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process. If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of Driver/ 3rd Party pick up photo ID and signed note of authority permitting GraysOnline staff to release your purchases to the third party.

Once assets are removed the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

IMPORTANT INFORMATION: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots. Provide suitably qualified personnel to remove their lots. Some lots may be electrically hard wired or services such as air, water, gas or oil may still be connected. Occupational Heath and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

• No Warranty, No Refunds
• Pick up Only
• Inspection Recommended

Occupational Health & Safety ASSET REMOVAL & REUSE

All work carried out by the buyer or his representative in this removal process is to be undertaken by adequately qualified and insured persons. Insurance and trade certificates may be required to be provide. All work practices employed by the buyer or his representative during removals must comply to all regulatory requirements and/or those as required by the vendor.

GraysOnline warn buyers THAT ALL PLANT OR EQUIPMENT OFFERED FOR SALE AT THIS AUCTION MAY NOT BE FIT FOR USE IN A WORKPLACE and it is the BUYER’S OR USER’S RESPONSIBILITY to ensure that it is brought to a state necessary to comply with the Occupational Health and Safety Act and is safe and fit for use in the workplace. Breaches of the Occupational Health and Safety Act carry penalties for people who PURCHASE and OPERATE UNSAFE EQUIPMENT without conducting a thorough safety inspection. Plant MUST be given a safety inspection prior to operation when it is purchased at Auction.

detailed in this catalogue may include software whose exploitation is subject to terms and conditions contained in a licence agreement (Licence) and the Licence may prohibit or restrict the use and transfer of such software. Interested parties should consider such terms and conditions before making a decision to purchase. Any sale of Computer Equipment shown in this catalogue is subject to the purchaser’s express undertaking to be bound by the terms and conditions of the Licence.

(a) General Site Access Requirements

Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site

• Forklift, crane drivers, riggers etc will be required to produce licence before commencing work on site
• It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives.
• Work carried out on this site must be done in a manner complaint with all Occupational Health & Safety Legislation
• All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with S3760 service testing and inspection of electrical equipment
• GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg safety footwear, safety eyewear, hard hats etc)
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres

(b) Plant Hazard Identification Reports

In accordance with current SA Occupational Health & Safety regulations, Hazard Identification Reports will be provided for all items meeting the definition of plant. These reports are available for inspection prior to commencement of the Auction. Reports for "high risk profile" items will be available from the Auction premises during the inspection period. Reports for "low risk profile" items (ie household appliances) are viewable at any time upon request.

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Why Grays Online?

• 599,000 unique visitors each month
• 580,000 registered buyers
• National marketplace
• 24 hour bidding

Whether you have one item or hundreds, click on the link below and send a brief description of your surplus assets and one of our experienced project managers will contact you for an obligation free discussion.

Click here - michaelb@grays.com.au or call Michael Bray on 08 8304 6703