5

Chamberlain 3380 tractor, 4 cylinder John Deere motor (At Adelaide, SA)

$2,900

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 29/03/2011 4.45 PM AEDT

  • Deliver to: Pickup Only Various Locations
  • Support: Mark Tonkin or (m) 0427 225 833

Closed

Description

Chamberlain 3380 tractor, complete tractor, faulty injector pump, 4 cylinder John Deere motor, 78hp, approx. 7000hrs, 23.1 x 26tyres, (asset located at Adelaide, SA. Inspection by appointment only with Michael Bray on 0407867082) (A 6.5% buyers premium applies to this lot) (802904-15)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Condition of Sale

THIS SALE IS PICK UP ONLY FROM VARIOUS LOCATIONS IN SOUTH AUSTRALIA AND ALBURY, WESTERN AUSTRALIA.

Inspection is highly Recommended Prior to Bidding. Description & Photos Should Be Used as a Guide Only

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% or 6.5% + GST will be added to the knockdown price of each lot sold.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn

BUYERS PLEASE NOTE:

  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
Quantities, Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Items must be inspected before removal from Grays as refunds or exchange are not given under any circumstances.

Sale Information

This Sale is GST EXCLUSIVE.

This Sale has a 6.5% or 13.5% Buyers Premium

ie Successful Bid Price is $100 + 13.5% Buyers Premium + 10% GST = Invoice Total of $124.85 or $100 + 6.5% Buyers Premium + 10% GST = Invoice Total of $117.15

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invoices exceeding $5000 may also be made onsite via bank cheque. Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email jodie.wallis@grays.com.au

Going... Going... Gone!!!

Typically, auctions end at the closing time posted. There are some exceptions to this, however. If there are any bids on a particular lot within 10 minutes* of the auction closing time ("Going, Going, Gone!" period), it will be extended until there are no bids for 10 continuous minutes*.

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. To ensure that you do not get outbid make sure you monitor the auction until you have won the item or enter a bid that you think will win!

(* refer to Bidders Agreement for full details of "Going, Going, Gone!" period)

Asset Collection

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY. **

Pick ups are not allowed outside of the dates/times listed below.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid. Goods will only be released with correct buyer details being provided (Full Buyer name, Sale and Lot number and ID).

Any items remaining uncollected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.

Assets located at 18 Churchill Road North, Dry Creek, SA must be collected on:

Monday 4th April 2011 between 9am to 4pm.

All other assets, collection by appointment only. You will receive an email on Friday 1st April 2011 with your paid invoice and collection details

Third Party Pick Up

If you intend to send a Third Party to collect your Goods on your Behalf, you need to send them with a Copy of your Winners E-mail, a Photocopy of Driver/3rd Party Pick Up Photo ID and Signed Note of Authority Permitting GraysOnline Staff to Release your Purchases to the Third Party. Alternatively, Email mark.oconnor@grays.com.au with the required information to ensure a speedy and efficient collection.

The information needed is:

  • Sale and Lot Numbers e.g. 002-60325
  • Copy of the paid invoice
  • Copy of your drivers license family
  • Buyers Registered Name and/or Email
  • Transport details: Company Name, Contact Person and Job Number provided by the transport company.

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Graysonline SA Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Graysonline SA Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Fuel Tanks

  • Fibretank Systems diesel fuel tank, type 30, 30,000 litres, steel horizontal single wall on ground fuel tank – New
  • Above ground fuel storage tank, approx. 2200 (diam) x 4500 (l) x 3000mm (h)

Agriculture/Tractors

  • John Deere 1050 tractor, Yanmar turbo diesel, 35hp approx., 2WD, with hydraulic lift and hydraulic pump front end loader bucket, engine hours 950
  • Case IH, MX100 tractor, Challenge 3810 front end loader with 2160 bucket, 100hp, 4WD, approx. 6600 hours
  • Ride on mower, Walker GHS, model MDD.SD, Kuboto 21hp diesel engine, cutting width approx. 1m
  • New Lechler AGP500ENU mist blower, 3 point linkage, triple tank, 500lt capacity
  • New Lechler AGP400EN mist blower, 3 point linkage, 400lt triple tank
  • New Lechler AGP300EN mist blower, 3 point linkage, 300lt triple tank
  • New Lechler AGS1000-MRX12M boom sprayer, 3 point linkage, 1000lt capacity, 12m boom

Earthmoving

  • Mini excavator, Nagano, NS03-2, New, 800kg, 900mm width, retractable tracks
  • Excavator, Daewoo SL290LC-V, 2001, 30 ton,
  • Skid steer, Case 410, 2005, 4 in 1 bucket, new tyres, repainted

Trucks

  • 2000 Isuzu Tautliner Truck, Sitec 270 Turbo Intercooled, 950 long, 270hp, 10 Speed Transmission, 12 Pallet Transporter
  • 2005 Daimler Chrysler AG Mercedes Benz, Atego 2328 long cab, Atego 6x2, manufactured: 06/2005, rigid 101, VIN# WDB9702782K984087, engine#: 90691600444694, model: OM906LA205KW, 279HP, showing 380405kms
  • Prime Mover, Scania, 94G 310, bogie drive, 310hp, 8 speed scania gearbox, 420,000kms, 1999, 4x2, 2 seater, GVM - 18600, vin # p4X20001226260, tare 6300kg, GCM - 40,000kg, diesel, operational, GVM - 18600, air bag suspension,

Trailer

  • 1999 Air Ride SA tautliner, tri axle, 37T, manual stands, air bag
  • Flat bed A trailer, Haulmark, 1996, tri axle, manual stands, 7.3m deck length
  • Flat bed A trailer, Southern Cross, 1997, tri axle, leaf spring suspension
  • Car trailer, tandem axle, with pull out ramps, ramp length at 2400mm

Robot

  • Kawasaki ZX165U robot, 2004, 6 axis, payload 165kg, with Kawasaki robot controller model D42-A-00, teach pendant control
  • 3 x Robot, Fanuc, model S-420iW, type A05B-1313-B203, motorised, 3 phase, 155kg, payload, 6 axis, AC servo motor drive system, weight approx 1400kg, serial no. R95X03317, manufactured in 1995; with Obara spot welding head, type RTX-1964R and welding transformer type NI 110H-670-U, 110kva; and Fanuc system, R-J2, type A05B-2350-B003

Unreserved Truck

  • Unreserved - $9 start Rigid Pantech, DAF, CF320, 75CF, 320hp, 976617kms showing, 2002, Tandem Drive, 6x2, air bag suspenion on the rear (just been replaced), brakes just been replcaed, 62 cubic metre pantech, 22.5m width, 2 barn doors, ring feeder, diesel, 16 speed transmission, 9mx2.4x2.9m pantech, 4.2m overall height, vin # XLRAT75PC2E576004, engine # S-12783, model FAT75, day sleep cabin, uhf, CB, CD player, 60% tyre wear, with side door, operational

Printing Equipment

  • Offset press, Yongcheng, economical series, model YC47C, Brand New, (with brand new paltesetter (model SL750) & approx 17 cartons of ink and approx 40 packs of stock) Press - single colour, fully automatic, high speed, durable, 10 piece ink roller, 470*365mm max paper size, 450*345mm max printing area, 28-250g/sqm paper weight, 1200-8000 sheets/per hour printing speed, 470*395*0 15mm plate size, 420*470*1.68mm blanket size
  • Folding Machine, Model ZE-8B/2, automatic
  • Vinyl Cutting Machine, model SE800
  • Manual paper cutter, Model HT-503, A3
  • Laminator, Lukia, model HT-802

Woodworking

  • Rye rotary copy shaper, Speedmax, model R90sm, 3 phase with control panel, 1800mm diameter bed

Engineering/Plant Services

  • Blanking Press, CVA, high speed, 100 ton capacity, approx 3000 parts an hour or 50 strokes a minute, with PC control box
  • Air compressor, Auloma twin cylinder, 15hp/ 415v, approx. 400 litre receiver, Atlas Copco
  • Air compressor, Globe twin cylinder portable, 240 volt
  • Arc welder, Goodwell, 140 amp/ 240 volt
  • Arc welder, Forbes, 130amp/ 240 volt
  • Arc welder, CIG, 140 amp/ 240 volt
  • Horizontal Mill, LM1450, Brand New, Huron type head
  • Radial Arm Drill, model Z3035B
  • Sheet Metal Coil Feed, Davmar, 1200mm, with levelling bars
  • Horizontal Mill, Huron, model MU5
  • Surface Grinder, Kent, model KGS-613, 30cm table, adjustable height
  • Horizontal Milling Machine, 1500x300mm table with vice, 40 taper

Ride On Sweepers

  • Ride on sweeper, RCM Aton, Honda powered, vacuum on side brush for dust free sweeping, overthrow cleaning systems to fill waste container separately
  • Ride on sweeper, American Lincoln, MPV60, manufactured 2000, LPG, 4 cylinder Ford engine

General Equipment

  • Balco wheel balancer, model B940, 240 volt
  • 7 x hot and cold water dispensers, Caprice & Aquaport
  • Under sink chiller units, Crystal Mountain, Aqua Cooler & Aquaport
  • 3 x mini generators, model YM400
  • KSB Ajax pumps, models UM00680 & 546313; Brevini Australia pump, type PD 4065/MRI
  • Lab power supplys, L.V., 12 volts, single phase
  • Jib Crane with motor, Brand New, Base to top height : 5 meters, Beam Length: 5 meters, Rotation : 360 deg, Load capacity: 1 tone at middle of the beam and 500 kg at end of the Beam, Floor Mounted
  • Universal Testing Machine, Avery, 500kn, 3 phase, with jaws and fixtures, 50 tonHardness Tester, Wilson Brinell, with display window, 3 phase
  • Hardness Tester, Wilson Brinell, with display window, 3 phase
  • Hardness Tester, Wilson Rockwell, B/C, in collabration, benchtop model, Model 3PR

Ex-Hire Equipment

  • Fully enclosed trailer, Trigg Bros, red, tandem axle, 14” rims, guards, jockey wheel, 50mm hitch, 7 pin round plugs
  • Minicon concrete saw
  • Mini loader rotary hoe attachment, Dingo RO6E
  • 4 in 1 bucket, Hughes Equipment
  • Step ladder, Bailey,12ft
  • Evaporative air conditioner, Convair, Millenia, model MIV AUS
  • Angle grinder, Metabo, 225m, 6600rpm
  • Hilti DG150 diamond grinder
  • Husqvarna DM230 coring machine
  • Hydraulic jack, 500kg capacity

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Quantities, Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Please check descriptions for location details.

For assets located at 18 Churchill Road North, Dry Creek, SA, inspection can be made on:

  • Monday 28th March 2011 from 9am to 4pm.

For all other assets: Inspection by appointment only. Please contact Michael Bray on 0407 867 082 or email michaelb@grays.com.au to make an appointment.

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty
 
Loading content...
Loading content...
View all Industrial Sales