5
234059-1

Sheet Roller John Heine 45HS (Pooraka, SA)

$969

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 15/08/2018 4.30 PM AEST

  • Condition: Used
  • Buyers premium
    20%
    Final Bid Price  
    $1,000 or Greater 15%
    Less than $1,000 20%

    Learn more

  • GST: Exclusive
    (see below note)
  • Deliver to: Pickup Only SA
  • Location: 3 Maxwell Road, Pooraka, SA, 5095
  • Support: Adelaide Customer Service or (p) (08) 6241 4610

Description

Sheet Roller John Heine 45HS

  • Manual operation
  • Steel fabrication
  • 3 Rollers 1900mm (L)
  • Dimensions Approx: 2650 x 600 x 1150mm

Location: 3 Maxwell Road, Pooraka, SA (813637-9)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Credit Card / PayPal surcharge fee may apply. See User Agreement

Heat Shrink Packaging System, Preferred Packaging

Heat Shrink Packaging System, Preferred Packaging
  • Comprising of 1 x Heat Shrink Tunnel, 2012 Built, Model PP500 3NE, 240W 50Hz, Belt Feed, Heated Bar Cutter, Rear Film Dispenser, Siemens Control Panel, Type TD200, independent Temperature Controller for Front Bar and Side Sealer, Lift Up Front Door for Access, Emergency Stop, Serial No. 003/12
  • With a Preferred Packaging Systems Heat Shrink Tunnel, Steel Mesh Conveyor, Emergency Stop, Serial No. 003/12, 3PH Power
  • 1 x Unit Size is 2150mm (L) x 1200mm (W) x 1450mm (H)
  • 1 x Unit Size is 980mm (L) x 1200mm (W) x 1450mm (H)

Heat Shrink Packaging System, Preferred Packaging

Heat Shrink Packaging System, Preferred Packaging
  • Comprising of 1 x Heat Shrink Tunnel, 2012 Built, Model PP500 3NE, 240W 50Hz, Belt Feed, Heated Bar Cutter, Rear Film Dispenser, Siemens Control Panel, Type TD200, independent Temperature Controller for Front Bar and Side Sealer, Lift Up Front Door for Access, Emergency Stop, Serial No. 004/12
  • With a Preferred Packaging Systems Heat Shrink Tunnel, Steel Mesh Conveyor, Emergency Stop, Serial No. 003/12, 3PH Power
  • 1 x Unit Size is 2150mm (L) x 1200mm (W) x 1450mm (H) Serial No. 004/12
  • 1 x Unit Size is 980mm (L) x 1200mm (W) x 1450mm (H) Serial No. 004/12

2001 Injection Moulding Machine Arburg

2001 Injection Moulding Machine Arburg
  • Model: All rounder 520c 1600-675
  • Power Supply: 3 Phase
  • Comments & Features: Clamping force - 160T, Tie bar spacing 520mm x 520mm, screw diameter 50mm
  • Note the following items are not included and will be removed prior to collection: 2 hydraulic pumps, Injection Screw motor, Proportional valve from Injection unit, Proportional valve from main hydraulic block assembly, Heat exchanger cartridges, and caps from main heat exchanger, Heat control modules from water manifold
  • Overall Dimensions 5600 (L) x 2000 mm (H) approx.
  • Approx. Weight: 5-6 tonne

Concrete Cutter, Target, Model: Pro 65II

Concrete Cutter, Target, Model: Pro 65II
  • dual blade, powered by a 4 cylinder Wisconsin petrol motor
  • Max RPM: 2600, max blade size: 48 inch, RMP gauge
  • key start with key, control, cutting depth indicator
  • approx overall dimensions: 1200 (W) x 2200 (L) x 1500 (H) mm

Pressure Vessel (Air Accumulator)

Pressure Vessel (Air Accumulator)
  • Make: Jahco Welding Engineers
  • Model: V260-79
  • Comments & Features: 1100 Diameter, 3300 High (inc feet), Design pressure 2000 kpa, Test pressure 3000 kpa, Class 2B

Walk Behind Floor Scrubber, Tennant 5700

Walk Behind Floor Scrubber, Tennant 5700
  • 36v, showing 683hrs, 240v charger
  • disc head, dual vacuum, water tank, pneumatic tyres
  • dimensions approx: 1600 x 800 x 1080mm (H)

UniCage 1210, Hot dipped galvanised base

UniCage 1210, Hot dipped galvanised base
  • 4-way entry for forklifts & pallet trucks, Zinc plated folding gates, Removable bifold gates for full walk in access, Inter-stackable when full or empty, Folding ratio of 3:1, Working capacity: 90kg.
  • Ext Dimensions: 1200 x 1000 x 1160mm, Int: 1150 x 950 x 990mm, Folded Height: 388mm

IBC Unit, Dry, Hot dip galvanised base

IBC Unit, Dry, Hot dip galvanised base
  • 4-way entry for forklifts & pallet trucks, galvanised folding gates, food grade HDPE in-fill panels, screw-less retention, smooth internal sides, moulded food grade HDPE hinged lids, 1000 kg working capacity, Folding ratio of 3:1, Inter-stackable (full or empty).
  • Ext Dimensions: 1200 x 1000 x 1210mm. Int Dimensions: 1100 x 905 x 1030mm. Height when folded: 385mm

ENGINEERING & MANUFACTURING

ENGINEERING & MANUFACTURING
  • Platform Scissor Lift JMQJY3.5-2
  • Body frame porto-power kit 10 Ton
  • Enerpac 30 tone double acting cylinder model RR-308
  • Earthmover, track tyre bead breaker
  • O.T.C V-Joint tool P/N 7490
  • Heat pump filter-dier Alco BFK165
  • ATW-5 Pipe / Cable Locator with Transmitter
  • Robone Chesterman No. 90B
  • Rex Roth A10VSO18 DFR1/31R
  • A&D 0 - 500kg AD Weight Indicator
  • Graco Fast Flo Air Operated Drum Pump
  • Grundfoss Pump
  • Olex Cables
  • Conveyor belt, rubber constructions
  • Air Receiving Cylinder, Vertical Unit, Compair
  • Cabinet Mounted Drop Saw, Compa, Capri Model
  • Air Compressor, Endurance Brand, Silent-LN HP10 Model
  • Brush Cutter & Hedge Trimmer
  • Blade Sharpener, Rockwell RS5105
  • Screws, Qty of 4 boxes, General Fasteners Brand
  • Air Coupling Valves, MinQuip, 25mm Electric Scrubber, Nobles, Model Wash 13
  • Pressure Cleaner, Kranzle, Model 105
  • Generator, Power Chief
  • Generator, Bosch, Model BWSA-2
  • Bench Grinder, Forbes, Model LF-77
  • Mercury Platform Scale, Model 211FS
  • Aircon Recharge Trolley, 240V Motor
  • Air Con Refrigeration Recharge Trolley, Robin Brand
  • Air Con Refrigerant Trolley, Air Chief, Digital Scale
  • Oxy/Acetylene Kit with Trolley
  • Air Compressor, Spear & Jackson, Model No. TA COMP 70
  • Air Compressor, Iron Air, Euro Series Model FB12/50
  • Steel plates
  • Concrete Grinder, FlexiTool, Model 15G-SFA
  • Portable Electrical Site Power Boards
  • Enerpac cylinders
  • Rubber Hose
  • Work benches
  • Parts Tubs
  • Hydraulic Cylinders

WORKSHOP & GENERAL EQUIPMENT

WORKSHOP & GENERAL EQUIPMENT
  • Alloy Wheels, Qty of 4, Suit Ford
  • Free Standing Merchandise Display
  • Large qty of Hessian sacks
  • Mobile Racks
  • Parts Trolleys
  • Hand Held Radios
  • Stainless Steel Trolleys
  • Floor Safe
  • Canvas Seat Covers
  • Load scales
  • 2 Post Vehicle Hoist, Direct Lift, Model DL-9
  • Hi Vis Jackets
  • Safety Glasses
  • Stainless Steel Trolleys
  • Stackable Stillages
  • Hydraulic Jacks

WHS

WHS

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.
  • Enclosed footwear must be worn onsite – Safety boots may be required at industrial sites.

Safe Work Method Statement

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below:

Safe Work Method Statement

Electrical Power Tools and Equipment

Electrical Power Tools and Equipment

If you have not purchased electrical tools and equipment in this auction disregard this notice.

Electrical Power Tools and Equipment (Inc. electrical leads)

The electrical articles in this auction have not been proved to be electrically safe. The electrical articles have not been tested by a qualified electrical worker and have not been proved to be electrically safe. General advice on how to use second-hand electrical power tools and equipment (including electrical leads) safely. General safe use advice for electrical power tools and equipment etc. intended for use with rated voltage of not more than 250V for single phase appliances and 480V for other appliances. This advice is not intended to replace specific manufacturer's information but can be used as a general guide. This advice does not cater for young children or people who are physically weak.

You are urged to

  • Use the power tool only for its intended purpose.
  • If the power tool is for indoor use only, do not use outdoors.
  • Do not immerse the power tool in water unless it is designed for this purpose.
  • Keep hands, fingers, feet, toes and hair away from dangerous moving parts, cutting blades and the like.
  • Do not use electrical power tools in the rain.
  • Make sure you have dry hands when operating an electrical power tool.
  • Do not use a damaged power tool.
  • A power tool may not be intended for use by children or people with an illness or disability without supervision.
  • Young children should not be allowed to play with the power tool.
  • Some power tools require special precautions for installation or user maintenance or both.
  • The plug must be removed from the socket-outlet before any cleaning or maintenance is done.
  • Do not place cord extension sockets or portable power outlet boards where they may be splashed or where moisture may get in.
  • Ensure ventilation holes or outlets are not blocked or partially obstructed.
  • If a fixed power tool does not have a supply cord and plug or other means for disconnection from the supply, a means for disconnection must be incorporated into the fixed wiring according to the Wiring Rules.
  • If the supply cord or plug is damaged:
  • The manufacturer or its service agent or a similarly qualified person must replace the cord to prevent an accident.
  • Power tools with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its service agent.
  • Other power tools that have a supply cord that cannot be replaced, should be scrapped.
  • The power tool should be maintained in order to ensure a long, useful life and to protect the operator against electric shock or mechanical mishaps.
  • A safety switch can enhance electrical safety when using electrical power tools.

Surplus Equipment to Sell?

Surplus Equipment to Sell?

For an obligation free appraisal and quote please contact Ted Byrne on 0457 855 436 or ted.byrne@grays.com.au

Conditions of Sale

Conditions of Sale

Motor Dealer Licence: MVD277714

This Sale is Pick Up Only from Various Locations, South Australia. Please refer to the descriptions to determine the location of each asset.

There are "B-Type" assets in this sale that attract compulsory removal fees, payable by buyers in addition to the auction price.

These Assets are Used therefore Inspection is Highly Recommended Prior to Bidding. Description, Photos and Condition Reports (if any) Should Be Used as a Guide Only. Bids on assets in this sale should be made based on your own inspection and assessment of the goods. GraysOnline do not test auction items. We provide no warranty as to the items working condition or suitability for its intended purpose.

The assets may have experienced moderate to heavy usage by consumers and have not been tested to ensure that they function according to the manufacturer's specifications. Some individual items may show signs of wear common with used items and in some instances accessories may vary from the standard (for example, software or manuals may be missing or different, no original packaging). (As per the bidders agreement that you have agreed to).

PLEASE NOTE: THIS IS AN AUCTION SALE. ALL ASSETS IN THIS SALE ARE SOLD “AS IS” WITHOUT WARRANTY AND COOLING OFF PERIOD.

The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the bidders agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.

Terms & conditions can be found Clicking Here

GraysOnline guarantee that all vehicles/boats/motorbikes in this sale are sold with clear title. Bidders may find when they do perform a PPSR check (highly recommended) in many cases the cars do have an encumbrance, which will be lifted as soon as the vehicle is sold at auction and monies are cleared in our account.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $5000 must be paid by direct deposit.

Variable Buyer's Premiums apply to all lots purchased in this auction.

  • GraysOnline will not be organising transport of goods. Please consider this prior to bidding.
  • Please take care when making a bid as once your bid is placed, it cannot be withdrawn and will not be cancelled.
  • If you are unsure do not bid as no refunds will be given.
  • GraysOnline Staff are here for security purposes only. Please make sure you have people to help you load your items and right transport.
  • Items must be inspected before removal from Grays as refunds or exchange are not given under any circumstances.
  • Pick ups are not allowed outside of the dates/times specified.

Payment

Payment

This Sale is GST Exclusive

This Sale has a Variable Buyers Premium where the percentage of buyer’s premium will change once a bid price of $1000 or more is reached. A 20% Buyer’s Premium applies when the bidding is less than $1000, moving to 7.5% or 15% buyer’s premium once the bidding reaches $1000 or more. The Buyer’s Premium will be added to your final bid price.

For Example:

Successful Bid Price is $100 + 20% Buyers Premium = $120 +10% GST = Invoice Total of $132.00 plus credit card fees if applicable

Successful Bid Price is $1000 + 15% Buyers Premium = $1150 +10% GST = Invoice Total of $1265.00 plus credit card fees if applicable

Successful Bid Price is $1000 + 7.5% Buyers Premium = $1075 +10% GST = Invoice Total of $1182.50 plus credit card fees if applicable

Asset Condition - Please refer to the individual lot description for asset condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Contact (02) 9741 9600 or email accounts@grays.com.au for an exact invoice total. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

For invoices totalling in excess of $5,000 GraysOnline reserves the right to charge a deposit against the purchaser’s credit card to a maximum of $5,000 or 20% of the invoice total. In bidding in this sale, the buyer agrees without reservation to GraysOnline doing so.

Any payment enquiries, please email accounts@grays.com.au

Warranty

Warranty

Please be advised in the state of South Australia when purchasing a vehicle through auction you will not have statutory warranty, cooling-off period or Roadworthy Certificate. Manufacturers warranties will still apply to a vehicle as per their terms and conditions, you will have to go directly to the manufacturer with the claim not GraysOnline. The balance of a new car warranty will also apply to vehicles sold at auction. No other warranties will be provided.

Registration

Registration

As registration and ownership requirements vary from state to state buyers should familiarise themselves with the registration requirements of the state in which the vehicle will be registered. As is standard auction practice the buyer is responsible for state transfer fees, duties etc. that may apply. Please note: Please note: If sold unregistered then the number plates will be removed. If sold with registration, the registration can only be transferred in the state where that registration is held, otherwise it will be sold unregistered and the number plates will be removed. Please check the lot description for each vehicle.

For SA registration, once your invoice is paid, you’ll need to visit a motor registry with:

  • Your paid Grays Online Invoice (you will not need the old registration paperwork, these will not be given with the vehicle)
  • Proof of identity. If you’re registering the vehicle in the name of a company or organisation you will need to also provide proof that it is a legal entity.
  • Application for Transfer of Registration form
You may need to pay for:
  • General registration charges
  • Transfer & Motor Vehicle Duty Fees
  • Stamp duty.
  • Number plates.
  • Late transfer surcharge. A surcharge will be applied to customers who fail to transfer the registration within 14 days of the date of acquisition.

For further advice and information regarding Registration in SA please refer to Government of SA Service Clicking Here

Going....Going....Gone!

Going....Going....Gone!

Typically, auctions end at the closing time posted. There are some exceptions to this, however. If there are any bids on a particular lot within 10 minutes* of the auction closing time ("Going, Going, Gone!" period), it will be extended until there are no bids for 10 continuous minutes*.

There is no limit to the number of times an online auction can be extended. This makes GraysOnline work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. To ensure that you do not get outbid make sure you monitor the auction until you have won the item or enter a bid that you think will win!

(* refer to Bidders Agreement for full details of "Going, Going, Gone!" period)

Asset Inspection

Asset Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Electrical/Mechanical items cannot be tested and/or started. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given. Items in this sale have not been tested and are sold on an "As Is" basis.

Inspection of the assets can be made at the following times:

  • MONDAY 13th August 2018 from 9:00am to 4:00pm only for assets listed at GraysOnline, Pooraka, SA. All other locations by appointment only, please call (08) 6241 4610.

Location:

  • GraysOnline, 3 Maxwell Road, Pooraka, South Australia, 5095. All other locations by appointment only.

Site Access:

  • Persons under the age of 16 years will not be permitted on site unless accompanied and supervised on site.
  • It is a condition of entry that all persons entering the site comply with any directions given by GraysOnline staff, their representatives or the site controller.
  • It is a condition of entry that all persons conduct themselves in a manner which does not endanger the health and safety of other persons on site, and which does not create a risk to health and safety.

Personal Protective Equipment (PPE):

  • GraysOnline will specify, according to the hazards and risks assessed as present on the site, any mandatory PPE required to be worn prior gaining approval to entry to the site. This equipment may include Safety Footwear, Safety Eyewear, Hearing Protection, and Head Protection, or any other item of PPE deemed necessary.

Asset Collection

Asset Collection

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE ASSETS IS THE BUYER'S RESPONSIBILITY. ASSETS HAVE NOT BEEN TESTED BY GRAYSONLINE. THERE ARE SOME B-TYPE ASSETS IN THIS SALE THAT ATTRACT COMPULSORY REMOVAL & LOADING FEES, PAYABLE BY BUYERS **

Pick ups are not allowed outside of the dates/times listed below.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid. Goods will only be released with correct buyer details being provided (Full Buyer name, Sale and Lot number and ID).

Pick-Up Date/Time:

  • Assets must be collected on MONDAY 20th August 2018 from 9am - 4pm for assets located at GraysOnline, Pooraka, SA. All other locations by appointment - once you have paid, you will receive an email with contact details to arrange the collection.

Location:

  • GraysOnline, 3 Maxwell Road, Pooraka, South Australia, 5095 and Various Other Locations in South Australia (refer lot description).

Third Party Pick Up:

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your Winners E-mail and Paid Invoice, a photocopy of your photo ID and signed note of authority permitting GraysOnline staff to release your purchases to the third party.

Please Note:

  • Children under the age of 16 will not be permitted on site.
  • It is a condition of entry that all persons entering the site comply with any directions given by GraysOnline staff, their representatives or the site controller.
  • It is a condition of entry that all persons conduct themselves in a manner which does not endanger the health and safety of other persons on site, and which does not create a risk to health and safety.
  • All persons visiting site must be wearing fully enclosed shoes, preferably safety boots.
  • Packaging and collection of assets is the responsibility of the purchaser.
  • Delivery is not available for this auction.
  • Any items not collected after the nominated collection times may be deemed abandoned.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

Personal Protective Equipment (PPE):

  • GraysOnline will specify, according to the hazards and risks assessed as present on the site, any mandatory PPE required to be worn prior gaining approval to entry to the site. This equipment may include Safety Footwear, Safety Eyewear, Hearing Protection, and Head Protection, or any other item of PPE deemed necessary.

Removal of Plant Information

Removal of Plant Information
  • GraysOnline will specify the site requirements for the safe removal of plant from the site. All work carried out on site will be performed in a manner compliant with the relevant State Occupational Health and Safety Legislation. All work undertaken on the site must be performed by suitably qualified and insured persons.
  • Licensing of Tradespersons - All tradespersons must possess the relevant licences to undertake plant disconnection and removal of plant activities. Copies of these licenses will be requested prior to the commencement of work and copies/license details will be retained by GraysOnline
  • Insurances - Copies of Insurances - PI/PL and Workers Compensation will be required to perform work on the site and copies will be retained by GraysOnline.
  • Agreement - before any wok commences the contractor/tradesperson must sign and agree to adhere to GraysOnlines OHS work practices.
  • Safe Work Method Statement (SWMS) - the contractor/tradesperson will be required to submit a completed SWMS
  • Work at Heights - All work above 2.0 metres will require the use of certified equipment. This equipment may include safety harnesses and work platforms. All equipment used will be in within the safe test date requirement for such equipment. All work at heights risks will controlled
  • Electrical Equipment- All equipment brought onto site must be considered safe and fit for use and be tested and tagged as required by AS/NZS 3760:2003: In-service safety inspection and testing of electrical equipment.
  • Electrical Disconnection of Plant - All disconnection of hard wired plant must be performed by a licensed tradesperson
  • Disconnection of Water - All disconnection of water services must be performed by a licensed tradesperson
  • Disconnection of Gas - All disconnection of gas services must be performed by a licensed tradesperson
  • Disconnection of Refrigerant Lines and Removal of Refrigerant Gases - All disconnection of refrigerant lines and removal of gases must be performed by persons possessing a current Refrigerant Handling Licence and have the required authorisations to store/sell refrigerant gases
  • Compressed Air - Compressed air must only be used for the purpose for which it is installed. Under no circumstances should compressed air be used for cleaning yourself down or other people; and never direct high pressure compressed air at other people. In addition to the risk of disturbed material getting into the eyes there is the possibility that air may be injected into the blood stream which can ultimately lead to death. The appropriate personal protective equipment (PPE) must be worn when working with compressed air.

Bidding History

Bidding Details Bid Time Bid Price Bid Qty Win Qty
G.D - Broadview SA15/08/2018 4.27.51 PM AESTAU $969 11
G.K - Medindie Gardens SA15/08/2018 4.26.16 PM AESTAU $689 10
g.c - athelstone SA15/08/2018 4.25.19 PM AESTAU $649 10
B.M - wingfield SA15/08/2018 4.24.38 PM AESTAU $609 10
*.* - Menangle Park NSW13/08/2018 8.28.06 PM AESTAU $409 10
H.P - Enfield SA13/08/2018 8.08.38 PM AESTAU $349 10
J.V - Waterloo corner SA12/08/2018 1.07.12 PM AESTAU $209 10
M.B - Edwardstown SA10/08/2018 7.36.26 PM AESTAU $189 10
P.R - MOUNT BARKER SA10/08/2018 2.26.08 PM AESTAU $169 10
T.C - Berri SA10/08/2018 1.14.03 PM AESTAU $149 10
n.a - boolaroo NSW09/08/2018 6.40.07 PM AESTAU $29 10
D.O - Salisbury North SA09/08/2018 5.50.35 PM AESTAU $9 10
Loading content...
Loading content...

Sign Up Now

Sign up to receive upcoming auctions & special offers!

Privacy Statement and Consent: By providing your email address, you consent to us sending you our newsletters as well as promotional material, updates and further information about our products and services. Our Privacy Policy contains information about how you can access and correct your personal information, how to make a complaint, and how we deal with complaints.

Subscribe

Follow Us

We Accept

Follow Us

 

NSW Liquor Act 2007 - It is against the law to sell or supply alcohol to or to obtain on behalf of a person under the age of 18 years.
NSW Liquor Licence LIQP770010049
Motor Dealer Licence: NSW MD13910, VIC LMCT11156, SA MVD277714, QLD 1700072, WA MD25136. NSW Motor Vehicle Recycler Licence: M057736
Grays (NSW) Pty Ltd is a credit representative (number 509214) of CarLoans.com.au Pty Ltd (Australian Credit Licence 433137)

Download Our App