5

Vehicle hoist, 4 post drive on, TI Bradbury, model: lift master MK3, serial

$959

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 16/08/2011 4.30 PM AEST

  • Deliver to: Pickup Only NSW
  • Location: 154 Old Pittwater Road (Building E), Brookvale, NSW, 2100
  • Support: Natalie Welzel or (p) 02 9112 9457

Description

Vehicle hoist, 4 post drive on, TI Bradbury, model: lift master MK3, serial: 10047, manufactured: 1980, 3000kg SWL, with provision for 2 wheel aligning variant units, together with twin jacking I-beam steel rails, electro/hydraulic operated with twin drive-on ramps, 415 volt. (Note: buyer to dismantle & remove). Important Note: Extraction / removal of plant from this site must be undertaken in a manner compliant with all relevant NSW OH and S legislation / regulations and codes of practice. A satisfactory ``Safe Work Method Statement`` (SWMS example available in the OH and S section of the sale overview) and copies / evidence of insurances and licenses will be required prior to any work being undertaken. (159573-38)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Reports

Conditions Of Sale

Conditions Of Sale

This Sale is Pick Up Only from Brookvale NSW.

These Assets are used therefore Inspection is Highly Recommended Prior to Bidding, Description & Photos Should Be Used as a Guide Only.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

ALL ASSETS IN THIS SALE ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit.

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

BUYERS PLEASE NOTE:

  • Collection of assets is the responsibility of the purchaser.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have suitable transport and people to help you load your items.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Collections are not allowed outside of the dates/times specified.

Automotive Equipment

Automotive Equipment
  • Vehicle Hoist, 4 Post, TI Bradbury Lift Master Model MK 3, Wheel Aligning Variant, 3000kg
  • Vehicle Hoist, 4 Post, Bishamon Model FP-3000X, 3000kg
  • Vehicle Hoist, 4 Post, Formula Model 430, 3000kg
  • Vehicle Hoist, 2 Post, Molnar Type MF 1705/85A, 2500kg
  • Vehicle Hoist, 2 Post, Formula Model KD 300, 3000kg
  • 4 Wheel Aligner, SafeTSteer
  • Refrigerant Recovery Units, Including Robinair & QH
  • Tyre Changer, Boxer Prince
  • Wheel Balancer, Coates 750
  • Computer Wheel Balancer, Repco
  • On Car Wheel Balancers, Repco
  • Headlight Aligners, Formula
  • Alternator Test Bench, Vane VT-500
  • Strut Spring Remover
  • Hydraulic Vehicle Jacks
  • Engine & Transmission Hoists, Trollies
  • Engines, Diesel & Petrol Including VW, Ford & Nissan UD
  • Alignment Computer, Autek OPTO-PLUS 604
  • Oil Stands

Welders

Welders
  • 2 x Tig Welder, CIGWELD Transtig 280 AC/DC
  • 3 x Arc Welder, Murex Muratran 400
  • Mig Welder, Transmig 195
  • Mig Welder, Transmig 200
  • 5 x Arc Welder, Aston 350 Amp
  • Portable Spot Welder, Safelec A1
  • Welding Supplies, Including Electrodes, Hoses

Engineering & Workshop Equipment

Engineering & Workshop Equipment
  • Sheet Metal Guillotine, Kleen, 1800mmW x 3mm Cut
  • Milling Machine, Kondia Powermill, Powerfeed, w/- Sony XYZ Axis Controller
  • Workshop Press, Archer 60 Ton, Hydraulic
  • Centre Lathe, Goodway Model GW-1433, Approx 1400mm Between Centres
  • Tool & Cutter Grinder, Brierley
  • Panbrake Folder, 1800mmW, Manual
  • Panbrake  Folder, 900mmW, Manual
  • Vertical Bandsaw, Startrite Model 18 V10, w/- Blade Welder
  • Power Hacksaw, Parkanson 121179, 6 inch x 6inch
  • Sheet Metal Rollers, AP Lever, 2.4mW, Manual
  • Sand Blasting Cabinet
  • Hydrovane Compressor, Gregory Model 66 CM
  • Bench Drill, Macson
  • Blacksmiths Anvil
  • Steel Oven
  • Dawn Vices, Over 20 x, Assorted
  • Machine Tools, Chucks, Steadies, Drills & Cutters
  • Patient Lifter, Manual
  • BAC Tables
  • Steel Storage Cabinets
  • Assorted Power & Hand Tools
  • Sanding Discs, Supplies
  • Combi Oven, Zanussi Model FCS101G4, Natural Gas

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50 + 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Online Auction Closing

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times

  • Friday 12th August between 10:00am & 4:00pm

Locations: 154 Old Pittwater Road, Brookvale NSW (Building E)

Asset Collection Post Auction

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up dates:

  • Friday 19th August between 10.00am & 4.00pm
  • Monday 22nd August between 10.00am & 4.00pm

Location: 154 Old Pittwater Road, Brookvale NSW (Building E)

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

  • Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
  • Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

OH&S

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty
R.G - Annandale NSW15/08/2011 5.22.53 PM AESTAU$95911
B.T - Thornton NSW15/08/2011 5.22.48 PM AESTAU$90910
j.w - Campsie NSW13/08/2011 3.51.19 PM AESTAU$25910
E.G - Oran Park NSW12/08/2011 12.20.52 AM AESTAU$5910
P.T - Raglan NSW12/08/2011 12.14.45 AM AESTAU$910
a.m - arncliffe NSW11/08/2011 4.18.21 PM AESTAU$910
Loading content...
Loading content...
View all Industrial Sales