5
PPB Advisory

Raychem Tyco electronics Inflator, Model TDUX-IT-16 and gas cylinder E7512-

$59

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 07/08/2012 3.30 PM AEST

  • Deliver to: Pickup Only NSW
  • Location: 29-33 Carter Street, Lidcombe, NSW, 2141
  • Support: Sheila Nguyen or (p) 02 9112 9486

Description

Raychem Tyco electronics Inflator, Model TDUX-IT-16 and gas cylinder E7512-0160 suitable for inflating TDUX duct seals comprising gas cylinder holder, regulator, flow controller delivery pipe, tube-snap assembly and in carry case (174162-240)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Report

Conditions Of Sale

Conditions Of Sale

This auction is Pick Up Only from 29-33 Carter St, Lidcombe NSW

These assets are Used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYERS PLEASE NOTE:

  • Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Collections are not allowed outside of the dates/times specified.

Forklifts

Forklifts
  • Forklift, 4 wheel counter balance forklift, Toyota, Model: 02.7FG30, Dual: LPG & Gasoline, Lift Capacity: 2730kg, Lift Height: 4700mm, 3 stage container mast, side shift, 4x solid tyres, Hour Meter Reads: 12879.2 as at 03/06/2012, 1x key
  • Forklift, 4-wheel counter balance, Crown, Model CGC30E-3, S/N JY-00119R, LPG, 2-stage mast, collapsed height 2580mm, max lift height 3950mm, max SWL 2480kg, features, side shift, fork positioner, working lights, flashing beacon, tail lights, indicator lights, puncture proof tyres, hour meter reads at 7 June 12 - 2228hrs (no gas bottle included), fork tyne length approx 1500mm (#2)

Box Trailer

  • Box trailer, ATA Trailers, Galvanised steel construction, drop down back, 200mm jockey wheel to front, spring suspension, tie down rails to sides, checkerplate flooring, 1 x spare wheel, VIN not visible, NSW rego reads M-82810, expires 30/Sep/2012, approx 8ft x 5ft

Site Shed

Site Shed
  • Site Shed: Skid mounted, colourbond cladding on timber framed with asstd random grooved ply lining and plywood flooring, and sloping, colourbond metal roof approx 4560 x 3070 x 2850mm (H). Fitted with Zip Econoboil, air-conditioner, 4 x GPO`s, fabricated zinc alume shelving, 900mm LH bowl, stainless steel sink and timber workbench; 3 x aluminium sliding windows with steel security grilles, fluorescent illumination and single timber door
  • Site Shed, Skid Mounted, Affordable Portable Buildings, colourbond steel ribbed profile cladding, insulated walls, Approximently 6000 x 3000 x 3000mm, damage to exterior cladding, inspection recommended

Plant and Equipment

Plant and Equipment
  • 9 x Bays Pallet Racking, Dexion AV, comprising 10 x end frames, 2450mm(h) x 840mm(w) and 29 x load beams 2740mm(l) x 50mm x 50mm
  • 7 x Bays Pallet Racking, Dexion, comprising 8 x end frames 3170mm x 840mm and approx 42 x assorted load beams 2740mm in length and 100mm and 50mm wide
  • Air compressor, Toolex model 15S 50-535018, single head, v-belt operated, mobile, 1.5KW induction motor, Fasco, with pressure guage, Procraft, 240 volt
  • Pipe Repair Kit, RXS comprising Bandit type metal strapping system with manual trimming clamp in carry case
  • Pipe Threading Kit, Ridgid including sizes 2``, 1 1/2``, 1 1/4``, 1``, 3/4`` and 1/2`` with stock in carry case
  • Gas and Flame Detection Equipment, including 2 x assorted gas alert monitors, 10 x multipro charging cradles, 1 x launch box delay line and 1 x Aver belt mounted breathing respirator
  • Raychem Tyco electronics Inflator, Model TDUX-IT-16 and gas cylinder E7512-0160 suitable for inflating TDUX duct seals comprising gas cylinder holder, regulator, flow controller delivery pipe, tube-snap assembly and in carry case
  • Assorted Stepladders
  • Cable Analyzer Fluke Model DSP-4100 and 1 Smart Remote Fluke Model DSP-4100SR with adaptors, cables and chargers in carry bag
  • Siecor Singlemode 900um Buffered Corning Optical Fibre Kit
  • Biosystems Multipro Gas Detector Kit

Electrical Components

Electrical Components
  • Pallet Assorted electrical Components, including fluorescent batten light fittings, diffuser pvc cover, white wire safety covers, fluorescent tubes, exit sign bodies and large head diag emergency light fittings in various makes, types and sizes
  • Pallet Assorted Electrical Components, including oyster ceiling light fittings, energy saving light globes, switched socket covers, twin socket mounting blocks, outlets and covers, 415 volt power surface switches, industrial down lights, 15 amp 240 volt sockets and plugs, spiral wrapping and fan kit assemblies
  • Pallet Assorted Sundries, including site distribution power box, jack chain, plumbweld pvc adhesive, spray paint cans, LPG gas 0.35kg cylinder, Erico Cardwell welding material, spray foam fill cans, cable dispensing reel, conduit locating flanges, hacksaw, respiratory face mask, shoe covers, nylon glands and LPG Gas Mate 3kg bottle and hose
  • Pallet Assorted Electrical Components, including industrial ceiling fluorescent light fittings and diffusers, 100 amp fuses, square tape clamps, metal half saddles, stainless steel set screws, self tappers, sprint and flat washer, 240 volt socket outlets, quick lock coupler, warning tape and metal fuse boxes
  • Pallet Assorted Hardware, including galvanised nuts, bolts, brackets, saddles, 2 x speaker horns, circuit breakers, I-bolts, anchor bolts, insulation tester, cable numbering system, cable lube and pvc adhesive, assorted electrical data cables and outlet boxes and face plate adaptors
  • Pallet Assorted Electrical Components including approx 24 horn speakers, Aust Monitor Model AQTC-30, metal half saddles, metal electrical fuse boxes, pvc conduit adaptors, screwed to plain ends, 25mm junction boxes, emergency light insert panels

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

For example:

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection

Inspection
  • Inspection of the assets is highly recommended.
  • Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.

Assets can be inspected on:

  • Monday 6th August between 9.00am & 4.00pm

At the premises of:

  • 29-33 Carter St, Lidcombe NSW

Asset Collection Post Auction

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Assets need to be collected on:

  • Friday 10th August between 9.00am & 4.00pm

At the premies of:

  • 29-33 Carter St, Lidcombe NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

  • Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
  • Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
S.L - burwood VIC07/08/2012 3.18.31 PM AESTAU$591105/08/2012 7.39.47 PM AEST
A.B - Narrabri NSW07/08/2012 3.18.31 PM AESTAU$591006/08/2012 6.55.10 PM AEST
M.S - Kings Langley NSW02/08/2012 11.09.15 PM AESTAU$91002/08/2012 11.09.15 PM AEST
L.F - Carlingford NSW02/08/2012 6.54.14 PM AESTAU$91002/08/2012 6.54.14 PM AEST
View all Industrial Sales