Executive High Back Clerical Arm Chair - Slimline Large Seat, Black Fabric

This auction is Pick Up Only from Kurnell NSW

These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYERS PLEASE NOTE:

• Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
• Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.
• Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
• Collections are not allowed outside of the dates/times specified.

• CNC Point to Point Borer, Biesse Rover Model 322 with single head overhead router, mfg 1997 S/No. 72788 comprising approx 2700mm twin rail table, 6 x alloy cross slides, fully adjustable with 18 adjustable rubber vacuum pods, 3 direction ``xyz`` axis travelling single head with approx 1200mm cross travel fitted with 7 tool holder carousel, 6 tool holders and 5 assorted tool bits together with 26 vertical heads and drill bits, 8 x horizontal heads and drill bits and including Biesse CNC remote console controller with digital display, remote vacuum pump system (replaced 2010), twin foot pedal sheet risers, infra red safety eye system and galvanised steel 250mm dia dust extraction ducting, 415 volt

• Panel Saw, Altendorf, model F45, S/No 86-9-240, tilting blade with scribing blade

• Spindle Moulder, Arbor, model T1200, with power feed head, infeed & outfeed benches
• Abrasive Wheel Cut Off Saw, Ryobi TSC305A
• Radial Arm Docking Saw, OMGA, model RN450, 700mm stroke, on timber fabricated bench
• Band Saw, Toolmac, 240 volt
• Compound Mitre Saw, Makita LS1212, on timber fabricated benchBelt Sander, Baby 80
• Manual Edgebander, Brandt, model & S/No illegible
• Pedestal Drill, Toolmac, model 82-532436, DOM: 2000
• Dust Extractor, GJ Wheeler, 4 bag

• Pedestrian Forklift, Crown, model 25WRTF126, S/No 39156, 320mm lift, 1130Kg capacity, Battery electric
• Pallet Jacks, Crown, manual hydraulic

• Communications Cabinet, Full height, complete with 3 x HP ML350 Proliant Servers, 1 x MGE 3200C UPS, 1 x Netgear Switch GS724T
• Telephone System, Alcatel Lucent Omni PCX, with handsets throughout
• Computer System, HP Core 2 Duo, with 19" monitor
• Computer System, HP Compaq Core 2 Duo with flatscreen 17" monitor
• Computer System, HP Compaq Core 2 Duo with flatscreen 19" monitor
• Computer System, Dell Optiplex 990 Core i5, with 23" monitor
• Computer System, HP Pentium D with Viewsonic 19" monitor
• Computer Systems, HP Core 2 Duo with Viewsonic 19" monitor
• Computer System, HP P4 with LG 19" monitor
• Computer System, Dell Optiplex, no monitor
• Computer System, HP AMD 64 with LG 19" monitor
• Computer System, Dell Pentium 3 with Philips 17" monitor
• Computer System Tower, Complete with monitor, on swivel bracket
• Photocopier, Canon iRC3180i, S/No MYW00387
• Printer, HP P2015dn
• Printer, HP 5200dtn
• Printer, Xerox Work Centre 228
• Printer, Xerox Work Centre 3110
• Label Printer, Zebra S4M
• Label Printer, Zebra Z4M
• Meeting Table, 10 seat, grey metal frame, with side table
• Reception Lounge, 2 seat, black vinyl
• Reception Armchairs, Red fabric, on chrome base
• Visitors Chairs, Fabric upholstered, on metal frame
• Clerical Chair, Gas lift, on castors
• Stationery Cabinets, Cherry charcoal, approx 2100 x 900mm
• Stationery Cabinet , Full height, beige steel
• Stationery Cabinet , Half height, grey steel
• Workstations to Suit 7 Staff, White work surface, with fabric partitions, with assorted pedestals & file storage
• Workstation to Suit 12 Staff, White straight work surfaces
• Clerical Chairs, Assorted, gas lift, on castors
• Meeting Table, Approx 90mm, light timber top
• Storage Cabinet , grey steel, ¾ height, with tambour doors
• Credenza, White & grey metal with red top
• Scale, CAS, 200kg capacity
• Desk/Workstation, White melamine, 2 person
• Bar Fridge, Ignis
• Clerical Chairs, Assorted, gas lift, on castors
• Whiteboard, Easel stand with flip chart

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

For example:

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

• Inspection of the assets is highly recommended.
• Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

• Friday 23rd of March between 8.30am & 4.00pm

Location: 260 Captain Cook Drive Kurnell NSW

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

• Wednesday 28th of March between 8.30am & 4.00pm
• Thursday 29th of March between 8.30am & 4.00pm

Location: 260 Captain Cook Drive Kurnell NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

• Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
• Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.