This auction is Pick Up Only from Beaconsfield, NSW.

These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYER'S PLEASE NOTE:

• Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
• Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.
• Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
• Collections are not allowed outside of the dates/times specified.

• Industrial Sewing Machine - Brother Exedra model DB2-B737-413 Mk2 (made in Japan) Automatic Single Needle Straight Stitch Sewing Machine with Auto Thread Trimmer, Specifications include 5500 Stitches / Min. 0 - 4.2 mm Stitch length, 476 x 178 Bed Size, 476 x 178 mm Bed Size, 266.5 x 1345 mm Arm Pocket Size, Foot and Knee Control and metal framed workbench.  240 Volts.
• Industrial Sewing Machine - Juki Corporation model DDL-5550 (made in Japan) Single Needle Sewing Machine with Foot Control and metal framed workbench. 240 volts.
• Industrial Sewing Machine - Brother Exedra model DB2-B737-413 Mk2 (made in Japan) Automatic Single Needle Straight Stitch Sewing Machine with Auto Thread Trimmer, Specifications include 5500 Stitches / Min. 0 - 4.2 mm Stitch length, 476 x 178 Bed Size, 476 x 178 mm Bed Size, 266.5 x 1345 mm Arm Pocket Size, Foot and Knee Control and metal framed workbench. 240 Volts.
• Industrial Purl Edge Sewing Machine - Merrow Purl Stitching Machine Style MG-2DNR (made in USA), The Merrow  Machine (or merrowing machine) sews a narrow rolled hem on light (Sheer and Gossamer fabric) to mid-weight fabrics. It can be ruffled to create a 'lettuce edge' look. Operating Speed 5500 RPM, Stitch Width 1/16" - 3/16th", 14 - 40 SPI,  Number of Threads 2-6. Metal framed workbench. With Twin Foot Control. 240 volts.
• Industrial Sewing Machine - Brother Exedra model DB2-B737-413 Mk2 (made in Japan) Automatic Single Needle Straight Stitch Sewing Machine with Auto Thread Trimmer, Specifications include 5500 Stitches / Min. 0 - 4.2 mm Stitch length, 476 x 178 Bed Size, 476 x 178 mm Bed Size, 266.5 x 1345 mm Arm Pocket Size, Foot and Knee Control and metal framed workbench. 240 Volts.
• Industrial Sewing Machine - Brother Exedra model DB2-B737-413 Mk2 (made in Japan) Automatic Single Needle Straight Stitch Sewing Machine with Auto Thread Trimmer, Specifications include 5500 Stitches / Min. 0 - 4.2 mm Stitch length, 476 x 178 Bed Size, 476 x 178 mm Bed Size, 266.5 x 1345 mm Arm Pocket Size, Foot and Knee Control and metal framed workbench.  240 Volts.
• Industrial Sewing Machine - Bernina 217 Zig-Zag Sewing Machine (made in Switzerland), Wave and Straight Stitch, Clutch Motor. Metal framed workbench with Foot and Knee controller. 240 volts.
• Industrial Sewing Machine - Yamato Blind Stitch Sewing Machine model CM352 for  light to medium weight fabrics. Metal framed workbench with Foot and Knee control. 240 volt.
• Industrial Sewing Machine - Juter model JU 0017 Sewing Machine. Metal framed Bench with Foot and Knee controls. 240 volts.
• Industrial Sewing Machine - Brother Exedra model DB2-B737-413 Mk2 (made in Japan) Automatic Single Needle Straight Stitch Sewing Machine with Auto Thread Trimmer, Specifications include 5500 Stitches / Min. 0 - 4.2 mm Stitch length, 476 x 178 Bed Size, 476 x 178 mm Bed Size, 266.5 x 1345 mm Arm Pocket Size, Foot and Knee Control and metal framed workbench.  240 Volts.
• Industrial Sewing Machine - Pegasus W600 model W664-01CB (made in Japan) Flat Lock Cylinder Machine with Upper and Lower Needle / Thread Cooled Device, Dial type Stitch Length adjustment, 3.2 to 6.4 mm Spacing. Metal Framed Bench, Dual foot controls. 240 volt.
• Industrial Overlocker Sewing Machine - Juki Corporation model MO-2516N (made in Japan) Twin Needle 5 Thread Industrial Overlocker. Clutch Motor. Sews 4 x thread overlocker plus  1 x Straight Safety Stitch, metal framed workbench. with 2 x Foot Controls. 240 volts.
• Industrial Overlocker Sewing Machine - Pegasus type EX5214-M03 2 Needle Overlocker Plus metal framed workbench. with Foot Control. 240 volts.
• Industrial Overlocker Sewing Machine - Juki Corporation model MO3916 Class FF6-500K Super High speed over lock / Safety stitch sewing machine Plus metal framed workbench and Foot Control. 240 volts.
• Industrial Overlocker Sewing Machine - Juki Corporation model MO-2516N (made in Japan) Twin Needle 5 Thread Industrial Overlocker. Clutch Motor. Sews 4 x thread overlocker plus  1 x Straight Safety Stitch . Metal framed workbench with 2 x Foot Controls. 240 volts.
• "Industrial High Speed Button Hole Sewing Machine - Brother model LH4-B814-2 Lock Stitch Button Holer suitable for General materials
• (shirt, blouse, dress etc.) Variable Stitch Count per Button Hole range 60 - 360, Upper and Lower Feed System, Metal Framed Bench, 240 volts."
• Industrial Button Sewing Machine - Reece 2611 415-BS Button Sewing Machine (made in Japan),  Metal Framed Workbench. 240 volt.
• Pfaff Bar tacking Sewing Machine - Pfaff model 3334-958 Metal framed bench, 240 volts.

• Garment Pressing Station - Pantex 'Miracle Fabric Safe' (made in Holland) S/n 08048256. Steam Working Pressure 6 Bar. Also includes Silver Star Steam Iron and Stand plus Drying Extraction System Rema Corporation Model RPE-2. 240 volt
• Qty 2 x Garment Pressing Stations - Simons Steam Co (made in Italy). Mat No. 21379, Tipe ASISEAF Mfg. 1994 with Fabric Press, Free Arm, Overhead Support bracket. Also includes Simons Electric Steam Iron and Stand
• Steam Generator - Simons Electric Boiler model VS 300/20, 20 Kw Mfg. 1985, Test Pressure 1125kPa, Design Pressure 750 kPa Complete with Feed Tank and Blowdown Tank plus aux Holding Tank. 415 volts

• Marker / Maker Wide Format Patten Printer / Plotter - Lectra Systems Wide Format Patten Printer with associated Documentation, accepts 1650 mm wide Patten Paper. Full specifications not available. Overall size approx. 2300 x 800 x 1100 mm (H). Also includes 2 x Part rolls paper.
• Digitising Table with Digitiser - Lectra Systems Electronic Digitising Table on Height and Tilt adjustable Pedestal Stand, Working size 1200 x 900 mm, Overall Size approx. 1500 x 1200 mm 240 volts
• Button Box - Data Input Keyboard for the Lectra Systems, fitted with 15 pin Plug. Note: Sold per each, Buyers to nominate number required.
• Fusion Press - Oshima model OP450GS, S/n 2825, Variable Speed Control, Digital Readout, Electronic Thermostat Mfg. 2007, Super Linear Guide Belt, Heat Proof Teflon Belt. 3.6 Kw, Fusing Width 450 mm. Weight 135 Kg. 240 volt.
• Powered Stud Press - Jiake Stud Press model JK-808 with Foot operated activation and Some assorted Dies. 240 volt.
• Industrial Button Hole Machine with adjustable Fly Bar - Reece, Full specifications unknown. Metal framed Bench. 240 volts.
• Steam Press - Singer Magic Steam Press model MSP7, Bench Top style, Built in Water Reservoir. 240 volt.
• Cutting Table with Manual Fabric Laying Machine - Laying Up Table and Fabric Laying Up/Spreading Machine, comprising Steel Framed Table with Masonite Tabletop, size approx. 7200 x 1840 mm in several Sections with Steel Running Rail on One Side. Together with Manual Spreading Machine,  Overhead Single Fabric Roll dispensing Arm with Chain Side Adjustments. Also includes Flat Weights, Rule and etc. Note: Fabric cutter is NOT part of this lot. Tools and adequate manpower required to aid removal.
• Electric Fabric Cutter - B Pritchard 'Lightning' Circular 4 1/4, Made in Australia. 240 volts.

• Huge Factory Size Clothes Hanging Racking System - Two Tier Racking System covering an area of approx. 25 x 18 Meters with 2 x sections of Motorised Rack. The approximate measurements of the track 125 Metres of 2 tier Hanging Racking with 4 Rails and 75 Metres 2 Tier Hanging Racking with 2 Rails plus 6 x Running Rails with Cross over Rail and Gates, 7 x Rails of about 9 Metres each in the centre area leading to the 2 Powered Elevating Rails in the dock area. Also includes an estimated 180 of Load Hangers on 7 x Mobile base Racks. The Supporting Uprights range in Height from 3500 x 4100 mm. Also included a Qty of Spare Rails
• Mobile Clothes Racks - Heavy Duty Double Hanging Rack on HD Lockable Castor Wheels. All Welded Square Tube Construction. Size approx. 1800 x 600 x 1750 mm (H).
• Mobile Clothes Racks - Galvanised Steel Tube construction, Heavy Duty Wheels. Size approx. 1790 x 1730 mm (H).
• Mobile Clothes Rack - Chrome Metal, Variable Height. Note: Sold per each, Buyers to nominate number Required.
• Mobile Clothes Rack - Galvanised Steel Tube construction, Heavy Duty Wheels. Size approx. 1790 x 1730 mm (H). Note: Sold per each, Buyers to nominate number required.
• Mobile Clothes Rack - Heavy Duty Rack on HD Lockable Castor Wheels. All Welded Square Tube Construction. Size approx. 1800 x 600 x 1750 mm (H).

• Mobile Clothes Racks with Large Qty of Ladies Clothing - Samples which include Tops, Pants, Jeans, and Jackets, Mainly sizes 10 - 12, Brands include "Capital' and 'J Brand, Liz Jordan & Noni B'

• Mobile Scaffold / Work Platform - Global Scaffold, SWL 225 Kg, comprising 2 x End Frames with 1 x Platform of Variable Height, Lockable Castor Wheels. Size approx. 1850 x 750 x 1800 mm (H). (Location: Ground Floor Basement with street access).
• Carton Strapping Machine - Goodpack model 669001 on Castor wheel Base. Size approx. 900 x 560 x 730 mm (H). 240 volts
• "Stock Picking Ladder - Baily Ladderweld model FS10071 4 Step with Platform. 1.4 metres (4'6""). Load rated 130kg. With castors and hand rails.
• Heavy-duty units for use in warehouse and office locations. 500mm x 500mm platform. "
• Platform Scales - MTW Floor Model Capacity 0-150 Kg, d=10g. 240 volts.
• Scales - Wedderburn Bench Top style, Capacity 0-50 Kg x 200g.
• Electronic Scales - EK-120A, Capacity 120g x 0.01g
• Work Table - Large Work station in 2 x Pieces, MDF Top on Metal Base, 1/2 length Under shelf plus 5 Hole Storage Unit. Table size approx. 3040 x 1210 x 900 mm (H). Note: Tools required to dismantle.
• Bundy Clock - Quartz Time recorder model QR830 with Single 25 Card Holder, Digital Readout, 240 volt Plug-in.
• Storage Racks - Comprising 4 x Corner Posts, 8 x Load Beams, 8 x End Support Rails, MDF Shelves and Dividers. Size approx. 1800 x 450 x 1800 mm (H). Note: Sold per Bay, Buyers to nominate number  of Racks Required.
• Grey Metal Storage Rack - 4 Tier Utility Rack with Fibre Board Shelves Size approx. 620 x 400 x 1820 mm Plus qty assorted Rack components.
• Step Ladder - Rated 120 Kg Industrial, 7 Step Single Sided. (Location: Ground Floor Basement with street access).
• Older Style Step Ladder - 7 Step Single sided. (Location: Ground Floor Basement with street access).
• Combination Step / Straight Ladder - Oldfield 'Up n Up'5 / 10 step. (Location: Ground Floor Basement with street access).
• Extension Ladder - Bailey Domestic Rated 120 Kg, 12 / 20 foot. (Location: Ground Floor Basement with street access).
• Step Ladder - Metal 12 Foot. (Location: Ground Floor Basement with street access).

• Desktop Computer and Monitor - HP Desktop Computer with Intel i-5 Processor, Full specifications not available together with HP 24 inch Wide Screen Monitor, Keyboard and Mouse. 240 volt Plug-in. Note: This item may be re-formatted and not contain licensed operating systems or software. It is the purchaser’s responsibility to obtain licenses for any resident software.
• Desktop Computer and Monitor - HP Desktop Computer with Intel i-5 Processor, Full specifications not available together with HP 24 inch Wide Screen Monitor, Keyboard and Mouse. 240 volt Plug-in. Note: This item may be re-formatted and not contain licensed operating systems or software. It is the purchaser’s responsibility to obtain licenses for any resident software.
• LCD Monitor - HP 2310e 23 Inch LCD Monitor. 240 volt Plug-in.
• Paper Shredder - Rexel  100X Auto+ Cross Cut Shredder. 240 volt Plug-in.
• Colour Laser Printer - HP Laserjet Printer model CP1525nw, 240 volts Plug-in.
• Label Printer - Meto Mi-4 Printer with HP Compac Pentium D Tower Computer and Samsung SyncMaster 710V 17 inch Printer.
• Qty 3 x LCD Flat screen Monitors - HP 19 Inch. 240 volts Plug-in.
• Multi Function Printer - Fuji Xerox Docucentre 1085, A 3 Flat Bed Scanner, Fax, Printer, ADF. 2 x Paper Trays. 240 volt.

• Large Granite Top Meeting / Dining Table on Stainless steel finish Metal Legs Stone colour Mottle Grey / Black, together with 6 x Bent Ply Chairs in Beech colour on chrome Metal Legs. Table Size approx. 2200 x 1100 mm.
• Reception Waiting Chair - Modern armless style in Red Fabric Upholstery on Timber Legs. Note: Sold per each, Buyers to nominate number required.
• Coffee Table - Round Thick Glass Top on Black Metal Legs. Size approx. 800 mm dia x 20 mm glass.
• Clerical Arm Chairs - Low Back Chair with Black Fabric Seat and Mesh Backrest, Adjustable with Gas Lift, Mobile Base. Note: Sold per each, Buyers to nominate number required.
• Refrigerator - Fisher & Paykel 2 Door Upright Refrigerator model M375T, RH Opening, Capacity 375 Litres, Size approx. 630 x 650 x 1600 mm (H). 240 volts.
• Microwave Oven - Sharp Carousel 1100 watts Plus 2 x Electric Toasters. 240 volts.
• Lunchroom Table and 10 x Chairs - Laminate Woodgrain Top Size approx. 750 x 1200 mm and 10 x Red PVC Chairs on Silver / Grey Metal Legs.
• Bookcase, Light Grey laminate, 3 Tier.
• Qty 10 x assorted Clerical and Draftsman Chairs, Gas Lift.
• Qty 2 x Black Bent Ply Chairs on Chrome metal legs.

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

For example:

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

• Inspection of the assets is highly recommended.
• Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

• Wednesday 11th of December 2013 between 9:00am & 4:00pm

Location:

• Ground Floor, 52 Queen Street Beaconfield NSW

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

• Tuesday 17th of December 2013 between 8:00am & 4:00pm
• Wednesday 18th of December 2013 between 8:am & 4:00pm 

Location:

• Ground Floor, 52 Queen Street Beaconsfield NSW 

To collect your purchases please attend the collection address during the times advised with a copy of your winner's e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner's e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

• Children under the age of 15 will not be permitted on site.
• All persons visiting site must be wearing fully enclosed shoes, preferably safety boots.
• All visitors to site must report to main office or Stores upon arrival.
• Packaging and collection of assets is the responsibility of the purchaser.
• Delivery is not available for this auction.
• Any items not collected after the nominated collection times may be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

Why do it yourself? MeeMeep delivers a flexible and cost effective solution for your pickup only purchases.

Simply post your job on MeeMeep and the transport providers will come to you.

Click here for more information and to get delivery quotes.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice.

GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.