Water chiller unit


Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 24/07/2012 4.00 PM AEST

  • Condition: Used
  • Buyers premium 15%
  • GST: Exclusive
    (see below note)
  • Deliver to: Pickup Only Various Locations
  • Location: 92-94 Talinga Road, Sandringham, Victoria
  • Support:  (p) (03) 8552 4444


Water chiller unit APV 6408, Model: SBE 203-1.4-2340N, design pressure 0.86 MPA 0-50 degrees C (Note: Item located at 92-94 Talinga Road, Sandringham, Victoria) (Type A Asset) (72577-21)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Credit Card / PayPal surcharge fee may apply. See User Agreement

OHS Report

Item Located in Carrum Downs, Victoria

Item Located in Carrum Downs, Victoria
  • SCM Record 121 CNC router 1080mm x 2600mm table, X, Y, Z axis, 12 tool holder with vacuum pump

Unreserved Items located in Dandenong, South, Victoria

Unreserved Items located in Dandenong, South, Victoria
  • Esab mig welder, power compact 250, 30A at 15V-250A at 27V, 3 phase (No welding leads)
  • EMP ARC welder, transarc junior 2, 240 volt
  • Lincoln electric AC ARC wlder, ideal ARC, TM-300, 30-450AMPS, 3 phase
  • Selco mig welder, IC400E, elettronica
  • CIG ARC welder, type TAD 86, 3 phase
  • Demag electric hoist, cable, electric pendant control, 3200kg capacity
  • Hitachi/Millsom electric chain hoist, 3 ton capacity, 3 phase
  • Triweld mig welder, compact A350CLS, 3 phase
  • Demag electric cable hoist, 5000kg capacity, 3 phase, mounted on motorised girder trolley
  • Reduction drive geared motor, 7.5kw, 3 phase
  • Hydraulic power pack, 3 phase with various hydraulic hoses

Items Located in Scoresby, Victoria

Items Located in Scoresby, Victoria
  • Griggio SC 3200 Panel Saw, Italian made panel saw with 3200mm Sliding Table. Features: Main Motor, Scribe Motor, 3 phase machine, 3200mm Sliding Table, 1200mm Manual Rip Fence, Manual Rise/Fall, Manual Tilt, Manual Scribe Adjustment, Riving Knife Guard, Heavy duty cast iron sawing unit, Solid Cross Cut Fence with flip over stops and magnifying lenses for easy reading of the tape, 1995 model machine.
  • SCM B17 multi spindle boring machine, 17 spindles, 32mm centres, horiz or vert, two vertical clamps, Has been retrofitted with digital height controller (needs replacing)
  • Holzher Edgebanders:1436SE Holzher Primus Edgebander, Pneumatic trim cut off saws, Pneumatic scraping top and bottom, Corner Rounding, Buffers, Overhead control panel, Manual strip feed unit for plastic laminates and solid wood up to 8mm, Automatic coil feed unit for pvc up to 3mm, Rebuild of Glue application zone is needed. (Machine could be used for spare parts or rebuilt)

Unreserved Items Located in Coolaroo, Victoria

Unreserved Items Located in Coolaroo, Victoria
  • Nissan dual fuel 3 ton forklift, Model No. UGJOA3OU, Serial No. 112264, 3700 maximim lift height, 2750kg maximum lift capacity, solid tyres, 6813 hours on meter, 2 stage mast, operational
  • Holytek vertical bandsaw, Model No. HB-600R, DOM: 03/96, Serial No. 05158, 3 phase, 600mm throat
  • Holytek dust extractor, Model No. DC-103, DOM 1997, 240 volt, mobile
  • Baker pedestal drill press, Model No. BD-2F, 16 speed, DOM 1997
  • Air Compressor, 3 phase, 5.5kw, forkable
  • 2 x Komatsu LPG forklifts, Model FG25HT-14, 3700mm maximum lift height, 2270kg maximum lift capacity, solid tyres, 10804 hours on meter, 2 stage mast, operational
  • 1984 Hino tray truck, Econ diesel, 479,495kms, manual, GCM 17000, GVM 10500, Tare 4670, Engine No. EH700157932, approximately 6.0 metre steel tray
  • VW transporter tipper - not running
  • Assorted timber packs

Unreserved Items Located in Sandringham, Victoria

Unreserved Items Located in Sandringham, Victoria
  • Trommel with heavy duty solid rubber tyres, 3 phase 1.5kw motor, 1400mm(D) x 1200mm(L) with 12mm(D) screen mesh cladding and internal baffles
  • Stainless Steel lined forklifable stillage station with manual gearbox control, 1500mm(L) x 2400mm(H) x 2000mm(W)
  • Seydelmann mincer, 3 phase, 30kw motor, new 2010, gearbox new 2010, Stainless Steel top, screw drive not available
  • Air fan 9000 CFM, 3 phase 7.5kw motor, inlet 660mm(D)
  • Solids fan, heavy duty 3 phase, ASEA 11kw motor, inlet 360mm(D), solid fan 270mm(W) x 500mm(D)
  • Water chiller unit condenser, Meuller AMD 40, Serial Number: K8748/A 4 fans, 3 phase, 3kw, 600mm(W) x 1800mm(H) x 3200mm(L)
  • Water chiller unit APV 6408, Model: SBE 203-1.4-2340N, design pressure 0.86 MPA 0-50 degrees C
  • Accu-rate dry material feeder, Serial Number: G10-99-1139 outlet screw diameter 15mm for micro dosing dry powders
  • Blue heavy duty steel site box made from 5mm mild steel plate with forklift pockets, 900mm(W) x 1600mm(L) x 1000mm(H)
  • Heavy duty mild steel stair access platform, unpainted, 870mm(H) x 2900mm(L) x 1000mm(W)
  • Solids fan, Aerotech Model 2F, 3 phase, 1.5kw motor with timber hopper
  • Two solid fans, Morse Air, 15HP-5 800CFM and Morse Air ARR4F CW
  • Mobile access platform, green on castors, 1000mm(H) x 2.000mm(L) x 620mm(W)
  • Metering valve, 3 phase, 0.5kw motor, 220mm x 250mm square inlet and outlet
  • Mikropul Stainless Steel dry powder 2 stage cyclone, body 460mm(D) x 1550mm(H), inlet 220mm ID and outlet 220mm ID
  • Stainless Steel vibrating floor silo, 3 phase vibrating motor on suspended base, 3200mm(H) x 2000mm(D)
  • Conveyor oven DTI Davron Technologies Inc USA DTI 762 multi chamber oven with pneumatic slide gates seperating chambers, (pneumatics removed) forced air recirculating fans each chamber, electric elements heating air, rewired 2011, 2000mm(w) chain belt x 6000mm travel path, spare belt included, 400amp electric control board not inlcuded, if required available separately

Unreserved Items Located in Scoresby, Victoria

Unreserved Items Located in Scoresby, Victoria
  • Executive leather visitors chair, black leather with wooden frame, Rockwood Executive Fine Furniture
  • Bench or laboratory stool, heavy duty Damba fully adjustable chair
  • Executive desk, real timber edging and drawer faces, with timber veneer finish. Drawer unit is able to be relocated (screwed) to either side allowing for a left or right side return. 1910mm(w) x 980mm(d) x 730mm(h
  • Computer desk, grey metal tubular frame, grey laminated top and shelf. 1250 (w) x 700 (d) x 680 (h) and 300 (d) shelf. Overall height is 920mm
  • Credenza, timber finish with solid facings, veneer tops and doors, one adjustable shelf on either side with lockable sliding doors (key missing), 1800mm(w) x 450mm(d) x 730mm(h)
  • Credenza, timber finish with solid facings and veneer tops, 4 drawers and one sliding door with adjustable shelf. Suitable for desk return, 990mm(w) x 460mm(d) x 670mm(h)
  • 3 x Executive visitors chairs, timber framed with blue and grey woven cloth seats
  • 5 x witches hats fluoro red
  • Fluorescent light tubes, approximately 210

Unreserved Items Located in Carrum Downs, Victoria

Unreserved Items Located in Carrum Downs, Victoria
  • Kalusen Bin Plastic 1100 wide x 1600 high
  • 2 x Ransbury electrostatic spray units with spare guns
  • Access Ladder 3.6m long
  • Flo Bin stainless steel blue 1300 wide x 1600 high
  • Stainless Steel Vat 1100 wide x 1200 deep 2 x valve

Items Located in Warragul, Victoria

Items Located in Warragul, Victoria
  • John Heine Guillotine, 6ft /1800mm, will run on 240V and comes with the original 3 Phase Motor and arms and cutting back stop bars
  • Mc Ferson sheet metal folder, 6ft/1800mm

Items Located in Tynong North, Victoria

Items Located in Tynong North, Victoria
  • Vertical air receiver, Forbes Pro Air, 1100kpa, 3/96, 900mm diameter x 2650mm high, overall height 3100mm with 150 psi safety valve
  • 4 x Mezzanine galvanised flooring sections, 2 x 6250mm x 1800, 1 x 5165mm x 1800, 1 x 4135mm x 1800 wide, all frames 200mm x 75mm C Channel, approximate area of 39 square metres
  • Galvanised workshop crane
  • Fukuta induction motor, Type AEEF frame, 20hp, 1460 rpm, 3 phase, 2008 (
  • Teco induction motor, Type AEEF, 15hp, 2840 rpm, 1990, 3 phase, unused
  • Forklift, Nissan, Model No. CPF02A25U, 2350 hours, solid tyres, side shift, 2200kg lift capacity, 4500mm mast height, LPG, (Note: no gas bottle)
  • Crate of assorted 100mm electrical and data couplings, and joiner bends etc
  • Assorted pallet racking uprights including stillage
  • 2 x tubs of assorted bolts, nuts, washers
  • 7 mm Galvanised chain, approximately 50kg
  • Heavy duty storage rack, adjustable
  • Steel bench cabinet, approximately 1830 long x 950 wide x 890 high, with timber shelf
  • Colby pallet racking, 12 x cross beams x 2600 long, 3 x 4280 uprights x 840 wide with timber shelves and clips
  • Power pack, hydraulic, Islef + Hagen, Model No. SC-102528, Reference 90000496, Max 175 bar
  • 22 x Fireglass tubs, 1030 long x 485mm wide x 70mm deep
  • Assorted electrical soft conduit
  • 45 X Assorted 3 phase plugs
  • Assorted 3 phase switches
  • Lifting magnet, Walker Magnetics, Type BUX NEO 500
  • Anchor 1 tonne girder trolley
  • Earth leads, .6kv, 3 x 1700mm long, 6 x 1600mm long, 3 x 500mm long
  • 1 x 18 Metre, 20 amp, 3 phase extension lead, 4 pin
  • 1 x 5.5 Metre, 3 phase extension lead and 20 amp switch
  • 1 x 7 Metre, 3 phase extension lead
  • 1 x 15 Metre, 3 phase extension lead and 20 amp plugs
  • 2 x Assorted extension leads, 3 phase
  • SEW Euro Drive, Type RE37 DT80 K4, .55 kw, 47 rpm, 415 volt
  • SEW Euro Drive, Type RF40 DT80 K4, .55 kw, 84 rpm, 415 volt
  • SEW Euro Drive, Type S47 DT80 K4, .55 kw, 77 rpm, 415 volt
  • Switch board wit temperature readout, 500 wide x 700mm high x 260 deep
  • Stainless steel flexible couplings x 3, 11.8 bar, 2008, DN100, approximately 600mm long
  • Compare filters, 4 x 232 psi
  • Bosch hammer, 800 watt, UBH 6/35 D
  • Railway level crossing light couplings, part number 26101, 26100 and T joiners
  • Bulka Bags, SWL=1250kgs, size 1050mm x 1050mm x 2100mm, (approximately 129)

Surplus Equipment to Sell

Surplus Equipment to Sell

For an obligation free appraisal and quote please contact Heath Burriss today on 0428 247 308, (03) 8552 4444 or email heath.burriss@grays.com.au

Condition of Sale

This sale is pick up only from Various Locations in Victoria.

These Assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $5000 must be paid by direct deposit.

A Buyers Premium of 15% + 10% GST applies to all lots purchased in this auction. Please check at catalogue level.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

Sale Information

This Sale is GST Exclusive.

This Sale has a 15% Buyers Premium ie Successful Bid Price is $100 + 15% Buyers Premium = $115.00 + 10% GST = Total Of $126.50. Please check at catalogue level.

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. For invoices totaling in excess of $5,000 GraysOnline reserves the right to charge a deposit against the purchaser’s credit card to a maximum of $5,000 or 20% of the invoice total. In bidding in this sale, the buyer agrees without reservation to GraysOnline doing so. Contact (02) 9741 9600 or at email accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totaling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail Price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Special Sale Terms

Occupational Health & Safety Asset Removal and Reuse

GraysOnline warn buyers that all plant offered for sale at Auction may not be fit for use in a workplace. It is the buyers/users responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health & Safety Act and is fit for purpose.

The cost and responsibility for all aspects of asset removal lies with the buyer. All work carried out by the buyer or his/her agent must be in accordance with relevant site and/or industry conditions as well as to the instructions of GraysOnline Auctions and our vendor.

A summary of these types of enforceable requirements is as follows.

  • Persons under the age of 15 years of age will not be permitted on site unless accompanied and supervised by an adult at all times
  • Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site
  • Forklift, crane drivers, riggers etc will be required to produce license before commencing work on site
  • It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives
  • Work carried out on this site must be done in a manner compliant with all Occupational Health & Safety legislation
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment
  • GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site, eg safety footwear, safety eyewear, hard hats etc
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes GraysOnline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often.


Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

Monday 23rd July 2012 between 9.00am and 4.00pm

Location ~ Various Locations in Victoria - please refer to lot description for detail.


Delivery is not an option for this sale. The removal of the goods is the buyers responsibility.

Assets are to be collected from various locations in Victoria, please refer to lot description for detail.

  • The area is defined as a work site and in accordance with the requirements of the VIC OH&S Act 2004, site removal activities must be conducted on a safe manner. In order to manage and minimise site risks. The assets have been categorized into type A or B Assets

Type "A" assets are low risk & are to be removed by the purchaser with Grays staff supervision and are to be collected on Thursday 26th and Friday 27th July 2012 between 9.00am and 4.00pm.

Type "B" assets are high risk and the site activities must be in accordance with the attached contractor procedures and are to be collected on Thursday 26th and Friday 27th July 2012 between 9.00am and 4.00pm.

Type "B" assets are high risk and the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment with a qualified contractor. JSAs and contractor requirements forms are to be submitted before work is started on site.

Alternatively GraysOnline have pre-qualified the following contractors to perform removal work on site.

  • Shane from Total Crane Trucks on 0418 540 794
  • Troy from Machinery Relocations Australia on 0487 939 785
  • David from AME Lift & Shift on 0459 713 602 or view liftandshiftoz.com.au
  • All lots have been electrically disconnected
  • If you would like to further discuss the site OH&S issues, please contact Grays OHS Manager. (Barry Sutton - 0409 230 005)

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid.

Please advise Graysonline of your removal/collection arrangements, the following contractor package must be faxed or emailed to Sue susanp@grays.com.au or 03 8552 4400.

An invoice will be available for collection when you pick up your goods.

Once assets are removed the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

Important Information: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots and provide suitably qualified personnel to remove their lots. All lots have been electrically disconnected. Occupational Health and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

Third Party Pick Up

If you intend to send a Third Party to collect your goods on your behalf, you need to send them with a copy of your Winner’s E-mail and Signed Note of Authority permitting GraysOnline staff to release your purchases to the third party. Alternatively, Email - susanp@grays.com.au or fax all relevant documents to (03) 8552 4400 with the required information to ensure a speedy and efficient collection.

The information needed is:

  • Sale and Lot Numbers e.g. 002-60325
  • Buyer’s Registered Name and/or Email
  • Transport details: Company Name, Contact Person and Job Number provided by the transport company.

Bidding History

Bidding Details Bid Time Bid Price Bid Qty Win Qty
S.L - burwood VIC24/07/2012 4.24.50 PM AESTAU $609 11
K.V - Eltham VIC24/07/2012 4.24.25 PM AESTAU $584 10
R.W - west melbourne VIC24/07/2012 3.36.33 PM AESTAU $284 10
j.g - langwarrin VIC19/07/2012 3.50.33 PM AESTAU $9 10
Loading content...
Loading content...

Sign Up Now

Sign up to receive upcoming auctions & special offers!

Privacy Statement and Consent: By providing your email address, you consent to us sending you our newsletters as well as promotional material, updates and further information about our products and services. Our Privacy Policy contains information about how you can access and correct your personal information, how to make a complaint, and how we deal with complaints.


Follow Us

We Accept

Follow Us


NSW Liquor Act 2007 - It is against the law to sell or supply alcohol to or to obtain on behalf of a person under the age of 18 years.
NSW Liquor Licence LIQP770010049
Motor Dealer Licence: NSW MD13910, VIC LMCT11156, SA MVD277714, QLD 1700072, WA MD25136. NSW Motor Vehicle Recycler Licence: M057736

Download Our App