Hand held swager/crimper, make and model not visible, 240V plug in (174582-

This auction is Pick Up Only from Rydalmere, NSW

These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYERS PLEASE NOTE:

• Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
• Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.
• Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
• Collections are not allowed outside of the dates/times specified.

• Cut to length sheet metal coil line, Colrol, Model 3178A5511 B64, featuring, stock straightening and feed rollers, 3 x knotching/punching heads, guillotine, maxium width g approx 1500mm, electro pneumatic operation, Allen Bradley Panel View C600 control panel, 4 x manual roll decoilers, overall foot print approx 6900 x 2230mm
• Profile cutter, Farley Wizard, Model 2000 LVL1, S/N88130, rail mounted cutting head with a Farley ANCA touch panel controller featuring: X/Y movement, oxy, marking or plasma operation, variable cutting speed; with Hypertherm Power Max 900 Plasma Cutter , slatted cutting table approx 6200 x 1900mm
• Beader roller, make and model not visible, max product width approx 2500mm, feeder and beader roller sets, beading roller set up for 300mm centres, forward and reverse,
• Brake press, Chalmers & Corner, Model 35 ton capacity, max width approx 2400mm, 3-profile muliformer base approx 2440mm long, fitted with 6 x forming blades from 120 to 1170mm, and approx 8 x assorted straight and angled blades in varying lengths, manual back guage, safety beam guarding, foot and pendant control
• Brake press, Chalmers & Corner, model not visible, 1800mm wide bed, max capacity 2mm thick mild steel plate, manual back guage, safety beam guarding, fitted with 5-profile 1800mm base former, 2 x assorted multiform bases 650 and 300mm long and 10 assorted blades in various rangeing 50 to 900mm long
• Lockformer, Corner Cadet, duct corner insertion tool, magazine with separate checker plate work platform approx 2000 x 1150mm
• Guillotine, A P Lever, No 7B, approx 1200mm wide bed, 1.2 mm mild steel max, electric flywheel action foot pedal control, manual back guage
• Incline press, Wellbank, Model 353A, 35 ton, bed size approx 710 x 460mm, fly wheel style, foot control pedal, separte electrical control box
• Pinch rollers, John Heine No45H, electrical powered, 3 x approx 1800 x 80 (dia) mm rollers, foot pedal control
• Swage and jenny bench centre, comprising: 1 x manual swager, McPhersons Model 80S, 12 inch throat; 1 x belt driven swager, John Heine, 270mm throat, foot pedal operated; powered jenny roller, John Heine, Model 42C, adjustable sliding throat to approx 1000mm; 1 x manual jenny roller; on fabricated metal bench approx 1200 x 950 mm
• Fly press, John Heine, No 86A, manual operation, 350 x 300 slotted bed, 100mm throat
• Pan brake, ACY Superbend, 1800 mm wide work area, manual operation, 14 x asorted width fingers ranging from 80 to 250mm,with steel fabricated work table approx 2430 x 3450mm
• Friction cut-off station, comprising: Hitachi, Model CC14SF, 2400W, 355mm disc, manual quick release vice 180mm width max, mounted on purpose built mobile work bench approx 1350 x 700 mm
• Sheet metal folder, make and model not visible, hydraulic powered, approx 2500mm wide work area, manual clamping, push button control
• Sheet metal folder, make and model not visible, manual operation, approx 1250mm wide work area, steel fabricated work table approx 2100 x 1200mm
• Pan brake, make and model not visible, manual operation, 12 x assorted fingers ranging from 50 to 200mm
• Sheet metal folder, make and model not visible, hydraulic powered, foot control, approx 1450mm wide work area, steel fabricated work table approx 2100 x 1620mm
• Geared head drill, WMW, Model BS25B, S/N 11063, 8 speed min 90 rpm, fitted with 13mm keyed chuck, 125mm max head travel, adjusted height table approx 400mm dia, 415V plug in, Note: Oil viewing window is broken
• Drill and grinder centre, comprising: Pedestal drill, Hafco, Model SPD-20, 0.5 HP motor, spindle 2MT, with 13mm keyless chuck, 12 speed blet driven, approx 80mm rjise and fall head, approx 300mm work table height adjustment, 320mm dia slotted work table, along with Abbott and Ashby 150mm double ended bench grinder, on fabricated metal bench
• Metal worker, Omera, Major, S/N 771061, cropping and punching capabilities, capacities: 90deg 80 x 8mm; 45deg 60 x 7mm; flat bar 80 x 10mm; punching 6 x 18 (dia) mm; foot pedal operated
• Powered hacksaw, Hafco, Model HS14, fitted with 355mm blade, manual clamping max cut 140mm, manual rise, gravity fall, automatic motor cut-off, on metal wheel trolley with 2 x feed-in, feed-out rollers and metal platform approx 1400 x 1400 mm
• Flanger, Lockformer, currently configured to turn up 10mm on sheet metal, capacity 16GA, approx 610 x 610 mm work table
• Spot welder, SIP, Model not visible, manual operation, water cooled, time and power adjustment. Waterr tank and pump included
• Mig welder, Auto-Weld, model not visible, external wire feeder, power, earth and work leads, hand piece, gas regulator, mobile
• TIG Welder, CIG, Transtig 180, AC/DC polarity, GC positive DC negative, 180Amp max 30% duty cycle, power aPlasma Cutter, ESAB, Model PCM-500i, variable control to 230 Amps, inbuilt air pressure gauge, torch, power and workleads on mobile trolleynd work leads, handpiece, gas regulator

• Air compressor, Pilot, K50, 2 cylinder belt drive by 7.5kW electric motor, on horizontal receiver tank approx 1900 x 450(dia) mm, 415V plug in. Note: Located on wall mounted mezzanie platform with security fence, buyer responsible for removal. No airlines included. Inspection HIGHLY recommended.
• Power Tools including: Cordless drill, Jigsaw, Impact drill, Circular saw, Trimmer, Electric drill, Electric hammer drill, Electric TEK screw driver, Sheet metal nibbler, Drop saw
• Hand Tools including: Bolt Cutters, Open Ended Spanners, Pliers, Tin Snips, Rubber Hammer, Screw Drivers, Tool Boxes, Clamps
• Sheet metal stock rack and contents
• Vehicle trolley jack, Armstrong
• Industrial floor vacuum cleaner
• Air pressure test unit

• Boardroom table approx laminated wood grain inset with black laminated wood grain edging on slab ends approx 3000 x 1200mm with 11 x black wooden framed and vinyl seat and backrest bucket style chairs
• Office suite, 3 pieces, lime washed pine wood veneer finish, comprising: 1 x desk, splayed front, 2-drawer, approx 2100 x 900mm; 1 x 8-door credenza approx 300 x 450 x 730(h)mm; 1 x twin sliding door credenza approx 1150 x 450 x 730(h)mm
• 3 x single person workstations with overhead open front lockers, grey melamine, each approx 1800 x 860 x 1800(h)mm
• Corner work station,  grey melamine, approx 2370 x 2100mm with hutch, bookcase approx 900 x 300 x 1800(h)mm and mobile 3-drawer pedestal
• Wide format plan printer, Oce 9400, continuous roll paper feed, 850mm wide, parallel port compatable, 240V plug in
• Laptop, Dell, Latitude D820
• Printer, Hewlet packard Laserr Jet, Model 132ON
• Communications cabinet, Comfab, grey metal case, glass fronted door, with 2 x patch panels (1 x 24, 1 x 16), HP procurve 2524 switch 24-port

This Sale is GST Exclusive

This Sale has a 13.5% Buyers Premium

For example:

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

• Inspection of the assets is highly recommended.
• Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

• Friday 13th July between 9:00am & 4:00pm

Location:

• 2 Pike Street Rydalmere NSW

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

• Thursday 19th July between 9:00am & 4:00pm
• Friday 20th July between 9:00am & 4:00pm 

Location: 

• 2 Pike Street Rydalmere NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

• Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
• Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.