5

Sifting table, Wifley table, S/N 18150, steel frame, vibratory, shaker mech

$4,850

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 23/09/2010 4.00 PM AEST

  • Deliver to: Pickup Only TAS
  • Location: Repot First to 6 Campbell Street, Gladstone, TAS
  • Support: Scott Matthews or (p) 03 8552 4444, (m) 0400 827 333

Sold

Description

Sifting table, Wifley table, S/N 18150, steel frame, vibratory, shaker mechanism, slopped table surface, water bars, and controller with overflow bund tank. (Type "A" Asset) (543164-108)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Conditions Of Sale

This Sale Is Pick Up Only From Gladstone, Tasmania, Victoria.

These assets are Used, however description & photos should be used as a guide only and inspection is recommended.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn

Link to other items at this address

Click on the following link to view CATERPILLAR LOADER & ISUZU TIP TRAY TRUCK - TASMANIA PICK UP;http://www.graysonline.com.au/sale.asp?SALE_ID=67342

Sale Information

This Sale is GST Exclusive.

This Sale has a 12.5% Buyers Premium ie Successful Bid Price is $100 + 12.5% Buyers Premium = $112.50 + 10% GST = TOTAL OF $123.75

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invoices exceeding $5000 may also be made onsite via bank cheque. For invoices totaling in excess of $5,000 GraysOnline reserves the right to charge a deposit against the purchaser’s credit card to a maximum of $5,000 or 25% of the invoice total. In bidding in this sale, the buyer agrees without reservation to GraysOnline doing so. Contact Jodie on (03) 8552 4444 or at jodie.wallis@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totaling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

Any payment enquiries, please email jodie.wallis@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Special Sale Terms

Occupational Health & Safety Asset Removal and Reuse

GraysOnline warn buyers that all plant offered for sale at Auction may not be fit for use in a workplace. It is the buyers/users responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health & Safety Act and is fit for purpose. The cost and responsibility for all aspects of asset removal lies with the buyer. All work carried out by the buyer or his/her agent must be in accordance with relevant site and/or industry conditions as well as to the instructions of GraysOnline Auctions and our vendor.

A summary of these types of enforceable requirements is as follows.

  • Persons under the age of 15 years of age will not be permitted on site unless accompanied and supervised by an adult at all times
  • Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site
  • Forklift, crane drivers, riggers etc will be required to produce licence before commencing work on site
  • It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives
  • Work carried out on this site must be done in a manner compliant with all Occupational Health & Safety legislation
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment
  • GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site, eg safety footwear, safety eyewear, hard hats etc
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres

Special Sale Terms Continued

  • No Warranty, No Refunds
  • Pick up Only

Occupational Health & Safety

(a) Removal Process

All work carried out by the buyer or his representative in this removal process is to be undertaken by adequately qualified and insured persons. Insurance and trade certificates may be required to be provide. All work practices employed by the buyer or his representative during removals must comply to all regulatory requirements and/or those as required by the vendor.

Industrial Equipment Safety Warning

GraysOnline warn buyers That All Plant Or Equipment Offered For Sale At This Auction May Not Be Fit For Use In A Workplace and it is the Buyer’s or User’s Responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health and Safety Act and is safe and fit for use in the workplace. Breaches of the Occupational Health and Safety Act carry penalties for people who PURCHASE and OPERATE UNSAFE EQUIPMENT without conducting a thorough safety inspection. Plant MUST be given a safety inspection prior to operation when it is purchased at Auction.

Computer Equipment

detailed in this catalogue may include software whose exploitation is subject to terms and conditions contained in a licence agreement (Licence) and the Licence may prohibit or restrict the use and transfer of such software. Interested parties should consider such terms and conditions before making a decision to purchase. Any sale of Computer Equipment shown in this catalogue is subject to the purchaser’s express undertaking to be bound by the terms and conditions of the Licence.

(b) Plant Hazard Identification Reports

In accordance with current VIC Occupational Health & Safety regulations, Hazard Identification Reports will be provided for all items meeting the definition of plant. These reports are available for inspection prior to commencement of the Auction. Reports for "high risk profile" items will be available from the Auction premises during the inspection period. Reports for "low risk profile" items (ie household appliances) are viewable at any time upon request.

Contacts

  • Sales Information and Project Manager, Denis Matthews on 0407 742 913 or email denis@grays.com.au
  • For Technical information please contact Peter Campbell, Yarranvale Process Consulting Pty Ltd, Mobile 0419 350 460
  • Contractor - Bruce Branch, Fabrications Pty Ltd, Mobile 0419 583 019
  • Electrical Contractor - Jake Hall, Jacob Hall Electrical, Moble 0488 635 221

Mineral Process Plant

  • Commission 2008
  • Approximately 220 tonnes per hour
  • Twin deck vibrating screen
  • 4 x 4 cell primary jigs
  • 1 x 2 cell secondary jig
  • 2 x 30 inch diameter tertiary jigs
  • 2 x 48 inch diameter circular jigs
  • 1 x 36 inch diameter circular jig
  • 1 x 36 inch Knelson refurbished gold concentrator
  • 1 x spiral module comprising 2 x 2 start Reichert MG4 spirals, density slurry tank
  • Feed bin, pumps and frame work
  • Containerised MCC with 7 variable speed drives, PLCs and controls to meet Australian Standards
  • To be sold in various lots

Mineral Process Plant

  • Constructed 2006 - Non Commissioned
  • Approximately 200 Tonnes Per Hour
  • Twin deck vibrating screen
  • 4 x 4 cell 42 inch primary jigs
  • 1 x 2 cell 42 inch secondary jig
  • 2 x 30 inch tertiary jigs
  • 2 x 48 inch circular jigs
  • 1 x 36 inch secondary jig
  • Hydraulic feed bin
  • Containerised MCC with 23 variable speed drives, PLC and controls to meet Australian Standards
  • To be sold in various lots

Scrubber/Trommel Screen

  • Goldfields, 90 - 100 Tonnes Per Hour (Unused)
  • 11 metres x 1600mm diameter with 3 metres of 16mm punch plate screen

Scrubber/Trommel Screen

  • Goldfields, 90 - 100 Tonnes Per Hour (Unused)
  • 11 metres x 1600mm diameter with 3 metres of 16mm punch plate screen

Pumps

  • Warman Pump, Model 8/6 AH 200mm, 150mm dia discharge powered by 132kw 3 phase electric motor, Serial No. HDS27405/M, mounted on steel frame
  • Warman Pump, Model 4/3AH 100mm dia suction, 75mm dia discharge, powered by 5.5kw 3 phase electric motor, mounted on steel frame
  • Davey Pump, Model 1SO Spec, 250mm x 200mm x 315mm, 250mm infeed, 200mm outfeed powered by 37kw 3 phase electric motor, mounted on steel frame
  • Warman tailing pump, model 10/8AH, 250mm dia suction, 200mm discharge, Serial No. HDS27407-H powered by 185kW heavy duty 3 phase electric motor all mounted on steel frame
  • Deutz pump 1013 series, Serial No. 1914, powered by Deutz BF6M 1013 FC diesel engine, 14,614 hours, Berkley 2300 1/min pump (Note: Pump damaged but repairable)
  • Fire fighting pump, Davey, Model 5265H-O, powered by Honda 160 petrol engine
  • 2 submersible pumps, Ebara, Model 100 – 315, OML-511 powered by 11kw 3 phase electric motor
  • 2 Dumac submersible effluent pumps, Model Ruffy, powered by 4hp 3 phase electric motor
  • Diesel pump, Deutz, Model MC760-T, 240 suction /180 discharge powered by Deutz BF6M1013E 6 cylinder diesel engine, 111kw, 1800 1/min, Serial No. 10279030, full engine protection, mounted in sound proofed enclosure with built in fuel tank
  • Diesel pump, Berkley, Model B6EXBM, 223kw, 2300 1/min powered by Deutz 6 cylinder diesel engine, Model BF6M1013FC. Inbuilt fuel tank, skid mounted base. Complete with approximately 40 metres of 4 inch red lay flat hose
  • Davey fire fighting pump, twin propeller, Model 5265H-0 power by Honda GX200 petrol engine
  • High pressure pump, powered by Honda 5.5Hp petrol engine
  • Grundfos Type GRE3-10 vertical inline pump powered by .75kw 3 phase electric motor

2 X MCC Control Rooms

  • Containerised MCC control room comprising 7 Elettronica Santerno variable speed drives, Marshalling box, Honeywell notifier NFS2.8 fire alarm panel, 2008 CB&M Electro-Technologies MCCB, 2000A/50kVa 34 panel with filter wall and distribution board, steel 40 foot shipping container
  • 10 Elettronica Santerno variable speed drive units (not installed)
  • Containerised MCC control room, comprising 4 Elettronica Santerno pump starter boxes, 23 Elettronica Santerno variable speed drives, Marshalling box, Honeywell NFS2-8 notifier alarm control panel, 2008 CB&M Electro-Technologies main switchboard 200A/50kVa, 541P, with Terasaki temp power circuit breaker, Type AR325S, CB&M Electro-Technologies MCCA 40 panel distribution board, steel 40 foot shipping container with filter wall
  • High Voltage Aurora substation, 1.5MVA transformer (as new)

Test Plant

  • 900mm dia circular jig with peripheral tails discharge and bottom cons discharge
  • 1 cubic metre per hour Portable Jig Sampling Plant, manufactured by Maxi Weld Industries NSW 370mm diameter x 1000mm trommel and 300mm x 300mm 2 cell jig all powered by Honda 4hp petrol motor using align shaft skid mounted
  • Jigshot separator (iron separator), Goldfield, 900mm x 250mm screen, 225 magnetic drum, mounted on mobile trolley
  • Rotary Dryer, R + D (test pilot) type, rotary steel barrel, 1200 (dia) x 4000mm (L) approx, motorized 3phase 5hp baldor motor, David Brown geared drive ratio 112.1, LP Gas fired eclipse burner with Aerotech blower fan, galvanized insulated casing, skid mounted.
  • Conveyor, Northern conveyors, model MR45-5, S/N 1399, motorized, troughed, rubber belt, 450 (w) x 4600mm (L), 0.55kw geared drive motor, 3phase plug.
  • Conveyor, powered, rubber belt, approx 2800 x 450mm, troughed, Northern Conveyors, MR45-3, S/N 1400, 0.55kw geared drive motor, 3phase plug.
  • Auger feed conveyor, 200mm (dia) x 2800mm (L), motorized geared drive, belt driven, hopper, on forkliftable base, inclined.
  • Hopper, white steel, V-bottom in frame, approx 1250 x 1250mm.
  • Rotary dryer, R & D (test pilot) type, Installation not yet complete, no gas burner and blower fan not connected (Located on pallet), PLC controls installed.
  • Sifting table, Holman Wifley, reference no. 06019H2110, vibratory, slopping top, shaking mechanism, powered by Brooks motor with Holman drive, water bars, all mounted on heavy duty steel frame (not installed).
  • Sifting table, Wifley table, S/N 18150, steel frame, vibratory, shaker mechanism, slopped table surface, water bars, and controller with overflow bund tank.
  • Screen, Goldfield small vibrating mesh screen with sluicing table, variable drive DC motor speed controls, top mounted hopper feed.

General Equipment

  • 25 x tilting skip bins, Modern Equipment Co. forklift attachment, and 6000lbs capacity.
  • 2 x 1000litre white poly tanks in steel frame
  • Lay flat rubber water hose
  • Shipping containers
  • Transportable site offices
  • Transportable ablution block
  • Poly water tank, 3m (H) x 2m (w) with Davey water pump and 400litre header tank
  • All shelter arched awning, 16m x 12m, tarpaulin cover, galvanised steel ribs with high bay lamps
  • Galvanised light pole with power distribution board
  • 3 x poly water tanks, 11250litre each
  • Workshop equipment including hand tools, power tools, machine spare part consumables, workbenches, concrete vibrator
  • Spares including Krebbs hydrocylones, cabling, pipe fittings, gearboxes, hoses, bearings, electric motors
  • Rapid spray poly fuel tank, 600litre capacity with 12volt electric pump.
  • Rapid spray poly water tank, 6800litre capacity
  • Lifting chains and hooks
  • Drum tilting forklift attachment
  • Platform scales, 3000kg capacity, digital

Pipe

  • Black poly pipe, calibre – si-dn-315-pn-6.3 (tailins or process water) to be sold in 3 lots, approximately 2.5kms total.

Office Furniture & IT Equipment

  • Communication cabinet including HP proliant M1310 server and switch gear
  • Notebook computers
  • Desktop computers
  • Alcatel telephone system
  • Multifunction centres
  • Desks
  • Filing cabinets
  • Storage cabinets
  • Neolt trimmer, 1500mm(w)
  • Meeting table <li. Polycom conference phone
  • Dymo label printers

Inspection

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assesment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following time:

  • Tuesday 21st September 2010 between 9.00am and 4.00pm.

Location information:

  • Report first to 6 Campbell Street, Gladstone, Tasmania.

Asset Collection

** Delivery is not an option for this sale. The removal of the goods is the buyers responsiblity **. Some lots need to be disassembled and lifted to ground level. Please refer to Collection tab for contractor information.

Location information:

  • Report first to 6 Campbell Street, Gladstone, Tasmania.

Pick ups are not allowed outside of the dates/times listed below.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid. Goods can only be released with the correct information being supplied which includes Sale number, Lot number/s and Buyers name

Any items remaining uncollected after the nominated collection times will be deemed abandoned.

  • Pick up of Type "A" assets must take place from Wednesday 29th September to Friday 1st October 2010 from 8.30am to 4.30pm
  • Type "B" assets must take place by an approved Contractor (see below) from Wednesday 29th September 2010 to Friday 29th October 2010 from 8.30am to 4.30pm
  • Local contractor for removal- Branch Fabrications and Crane Hire (03) 6354 6103 or 0419 583 019.
  • For Technical information please contact Peter Campbell, Yarranvale Process Consulting Pty Ltd, Mobile 0419 350 460
  • Contractor - Bruce Branch, Fabrications Pty Ltd, Mobile 0419 583 019
  • Electrical Contractor - Jake Hall, Jacob Hall Electrical, Moble 0488 635 221
To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process. If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of Driver/ 3rd Party pick up photo ID and signed note of authority permitting GraysOnline staff to release your purchases to the third party.

Once assets are removed the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

Important Information: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots. Provide suitably qualified personnel to remove their lots. Some lots may be electrically hard wired or services such as air, water, gas or oil may still be connected. Occupational Heath and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

Third Party Pick Up

If you intend to send a Third Party to Collect your Goods on your Behalf, you Need to Send them with a Copy of your Winner’s E-mail, a Photocopy of Driver/3rd Party Pick Up Photo ID and Signed Note of Authority Permitting GraysOnline Staff to Release your Purchases to the Third Party. Alternatively, Email - susanp@grays.com.au or fax all relevant documents to 03 8552 4400 with the required information to ensure a speedy and efficient collection. The information needed is:

  • Sale and Lot Numbers e.g. 002-60325
  • Buyer’s Registered Name and/or Email
  • Transport details: Company Name, Contact Person and Job Number provided by the transport company.

Timber will only be loaded by Hallmark Oaks on to the purchaser vehicle or contractors vehicle. The vehicle must be suitable to transport the timber or loading will be refused.

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty Original Bid Time
s.s - randwick NSW23/09/2010 4.31.46 PM AESTAU$4,8501123/09/2010 3.42.14 PM AEST
h.w - queenstown TAS23/09/2010 4.30.30 PM AESTAU$4,8501023/09/2010 4.30.30 PM AEST
P.C - Milton QLD23/09/2010 4.15.09 PM AESTAU$4,7501023/09/2010 3.50.57 PM AEST
View all Industrial Sales