Brush Cutter - Stihl

Brush Cutter - Stihl

• Body type: 2 stroke petrol
• Plant number: F485
• Asset location: Bathurst Regional Council Works Depot, Peel Street, Bathurst. NSW (174866-4)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

This auction is Pick Up Only from various locations - please refer to description for full address

These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 7.5% or 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYERS PLEASE NOTE:

• Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
• Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.
• Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
• Collections are not allowed outside of the dates/times specified.

• Turbo Diesel
• Powershift
• 4-in-1 bucket
• Air Conditioning
• Showing approximately 3,500 hours
• Located at Lithgow, NSW

• 470 hp turbo diesel
• Eaton Fuller 18 speed
• PTO & pump
• Showing 327,010 km
• Located at Harden, NSW

• Flocon Body
• Live drive
• Drive material conveyer belt & sprinkler
• 8 speed manual
• Showing 338,931km
• Located at Lilydale, VIC

• Rosmech Scarab Mistral Sweeper Body
• Automatic
• Dual control and drive
• Reverse camera
• Left and right hand brooms
• Auto greaser for sweeper
• 1250 litre water capacity tank
• Showing 118,917km
• Located at Lilydale, VIC

• Garwood 8m3 rear load with bin lift
• Automatic
• Showing 223,250 km
• Reverse camera and monitor
• Air conditioning
• Rear mounted Code 3 Arrowstik with controller
• Located at Castle Hill, NSW

• Showing 174,844km
• Located at Nyngan, NSW

• Sitec 270 turbo intercooled diesel
• 8 speed Eaton Fuller gearbox
• 3 seater day cab
• Showing 231,000kms
• Located at Lilydale, Vic

• Turbo Diesel
• 5 speed manual
• Showing 329,000km
• Located at Lilydale, VIC

• Cummins diesel
• Showing 289,720km
• Located at Warren, NSW

• Steel tray with drop sides
• 5 speed manual
• Showing 44,425 km
• Located at Castle Hill, NSW

• Library Trailer with 2 level tray
• Approx 10 to 11 metre length
• Air bag suspension
• Air conditioned
• Fully electric, 3 phase with lighting throughout
• Shelving, windows, 2 electric sliding doors & sink
• Stairs and handrail, manual stands
• Located at Lilydale, Vic

• Showing 11,367 hours
• 13 tonne operating weight
• 6 cylinder Duetz diesel
• Located at Nyngan, NSW

• Front mounted Hardi sprayer
• Road mill on 3 point linkage
• Located at Harden, NSW

• Leaf spring
• Roller tarp
• Located at Harden, NSW

• 3 Gang – 2150mm cut
• Kubota diesel engine
• Showing 2,589 hours
• Located at Horsham, VIC

• 15 ft cutting width
• Hydraulic height adjustment
• Hydraulic folding wings
• PTO shaft drive
• Located at Menangle, NSW

• Suitable for 3 point linkage
• Holds approx 6 bags
• Located at Horsham, VIC

• 3 point linkage
• Hydraulic set up
• Top dresser
• Located at Lilydale, VIC

• Showing 287 hours
• Duetz diesel motor
• Located at Nyngan, NSW

• 2 metres long
• Steel Construction
• Located at Wodonga, NSW

This Sale is GST Exclusive

This Sale has a 7.5% or 13.5% Buyers Premium

For example:

Successful Bid Price is $100 + 7.5% Buyers Premium = $107.50+ 10% GST = $118.25

or

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

As registration and ownership requirements vary from state to state buyers should familiarise themselves with the registration and transfer requirements of the state in which the vehicle will be registered. As is standard practice the buyer is responsible for state transfer fees, duties etc. that may apply.

VEHICLES REGISTERED IN NSW - Before you buy a vehicle, it is your responsibility to check the registration and CTP insurance details of the vehicle via the RTA http://www.rta.nsw.gov.au/ or phone the RTA Contact Centre on 132213. You must transfer the registration into your name within 14 days of the vehicle coming into your possession or management.

VEHICLES REGISTERED IN STATES OTHER THAN NSW - In line with requirements in every State and Territory other than New South Wales, vehicles in these states/territories will be sold unregistered to private buyers. Plates will not be given to the successful buyer and it is their responsibility to obtain an UVP (unregistered vehicle permit) when organising to pick the vehicle up.

We advise purchasers to always check with relevant authorities (REVS, RTA, VIC Roads etc) for any previous vehicle history.

GRAYS will not be liable for any fines in relation to registration matters and registration may be cancelled if not transferred within 14 days of the invoice date.

Once your invoice is paid, you will need to visit a motor registry with:

Your paid Graysonline invoiceProof of identity, or if you are registering the vehicle in the name of a company or organisation, proof that the company or organisation is a legal entityA completed application for transfer formYOU WILL NOT NEED the old registration paperwork, these will not be supplied with the vehicleAnd you may need to pay:

Transfer feeStamp duty (unless exempt)Additional motor vehicle tax (or national heavy vehicle charges) if you have bought your vehicle from someone receiving an RTA concession (such as a pensioner) and you are not eligible for that concessionLate transfer surcharge. A surcharge will be applied to customers who fail to transfer the registration within 14 days of the date of acquisition

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Location:

• Various locations - please refer to description for full address

• Monday 18th June, 9.00am to 3.00pm

• Inspection of the assets is highly recommended.
• Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.