5

Glue portable spray contact adhesive gun, hose and pressurised container, S

$139

Quantity Available: 1

This auction has ended

To view similar items click here.

Closed: 24/04/2012 4.00 PM AEST

  • Deliver to: Pickup Only NSW
  • Location: Unit 2, 42 Lisbon Street, Villawood, NSW, 2163
  • Support: Gabrielle Lombe or (p) 02 9112 9583

Description

Glue portable spray contact adhesive gun, hose and pressurised container, Star Stuck PB 925N premier bond adhesive (172232-194)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Plant Hazard Report

Conditions Of Sale

Conditions Of Sale

This auction is Pick Up Only from Villawood, NSW

These assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only

ALL ASSETS IN THIS AUCTION ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 7.5% or 13.5% + GST applies to all lots purchased in this auction - refer to each Lot.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

BUYERS PLEASE NOTE:

  • Graysonline will not be organising transport of goods. Collection of assets is the responsibility of the purchaser, please consider this prior to bidding.
  • Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.
  • Staff are onsite for security purposes only. Please make sure you have suitable transport and equipment/people to help you load your items.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
  • Collections are not allowed outside of the dates/times specified.

TURRET PUNCHES

TURRET PUNCHES
  • Strippit Model CAP 1250, 20 Head Punching Turntable, Fanuc Controller, Optical Guarding
  • Strippit Model FC 1250S, 33 Head Tool Changer, Fanuc Controller, Optical Guarding  
  • Amada Pega 344Q Model Pega 304040 30 Tonne, Multi Head Tool Changer, Fanuc Controller

LASER PROFILE CUTTER

LASER PROFILE CUTTER
  • Trumpf Trumatic Model L2503E Lasercat Type TLF 2600 Turbo, Bosch Trumagraph Controller

ROLL FORMING LINES

ROLL FORMING LINES
  • 5 Double Punch Heads, 18 Roller Heads, Hydraulic w/- 37kw Motor, Bradley Panelview 300 Controls
  • 5 Head Punching, 20 Head Roll Forming, Hydraulic Power Pack, Colrol Travelling Punch, Touch Panel Controls

GUILLOTINES

GUILLOTINES
  • Cincinnati Model 1412 Shear, 3/16 Inch Mild Steel, Approx 3.8mW
  • Cincinnati Model 1012 Shear, 10 Gauge Mild Steel, Approx 3.8mW

BRAKE PRESSES

BRAKE PRESSES
  • Simat , Approx 3.1mW, 160 Tonne, Autogauge CNC 99 Control, Optical Guarding
  • Simat , Approx 3mW, 200 Tonne, Automec Autogauge CNC 1000 Control, Optical Guarding
  • Simat , Approx 3mW, 200 Tonne, Automec Autogauge CNC 99 Control, Optical Guarding
  • Chalmers & Corner, 35-55 Tonne, Approx 3mW, Automec CNC 1000 Control, Optical Guarding
  • Chalmers & Corner, 35 Tonne, Approx 3.7mW, Automec CNC 1000 Control, Optical Guarding
  • Amada Promecam Model IT PS, Approx 100 Tonne, Approx 2.8mW, Promecam CNC Control, Optical Guarding  
  • Darley Type EHP50, Approx 2.5mW, 50 Tonne, Dalen Controller
  • S & E Engineering, 80 Tonne, Approx 3mW, Control Panel, Optical Guarding
  • S & E Engineering, 80 Tonne, Approx 3mW, Control Panel, Optical Guarding
  • Hydrabend, 40 Tonne, Approx 2.4mW, Optical Guarding
  • Chalmers & Corner, 35 Tonne, Approx 3mW, Automec CNC Control, Optical Guarding
  • Stamping Press Line, Zani Model AF 120 4G, Bison Model ST 038 Straightener, Bison Decoiler/Winder Model UC-043
  • Amada Promecam Model ITPS250-12, 500KN Max Force, 1200mmW, Operateur OPC4X T8 Controller, Guarding

GENERAL ENGINEERING

GENERAL ENGINEERING
  • CNC Metal Cutting Bandsaw, MEP Shark 500 CNC FES, MEP CNC Evolution Controller
  • Gap Bed Centre Lathe, Mazak Model, Approx 1500mm Between Centres
  • Turret Milling Machine, Bridgeport 2JB Series 1, Sony Axis Controls
  • Turret Milling Machine, Bridgeport 2J, Sony Axis Controls
  • Surface Grinder, Okamoto, Wheel 355 x 38mm
  • Inclinable Power Press, Wallbank 504AG, 50 Tonne Capacity
  • Inclinable Power Press, Wallbank 353A
  • Inclinable Power Press, John Heine Model 206A Series 3
  • Inclinable Power Press, John Heine Model 203A Series 3
  • Inclinable Power Press, John Heine Model 203A Series 2
  • Power Press, Johns Hydraulic Equipment Type JDGP20, 20 Ton Capacity
  • Sheet Metal Rollers, AP Lever, 6ft
  • Mitre Saw, Eisele Model ZMS PJ023
  • Horizontal Bandsaw, Parkinson 100
  • Assorted Welders Including: Mig, Resistance, Projection, Tig, ARC, Spot
  • Assorted Drills
  • Metrology

FORKLIFTS

FORKLIFTS
  • Toyota  25 SAS Model 42-7FG25, Ride On Counterbalance, Lift Capacity 2270kg, Lift Height 4000mm, Dual Fuel, Sideshift
  • Nissan 30 Model KCUGH02F35U, Ride On Counterbalance, Lift Capacity 2480kg, Dual Fuel
  • Nissan 35 Model KCUGH02F35U, Ride On Counterbalance, Lift Capacity 2910kg, Lift Height 5000mm, Dual Fuel, Side Shift
  • Crown Walkie Stacker, Model 20MTIS4, Lift Capacity 2205lbs, Lift Height 144 Inch, Battery Electric

VEHICLES

VEHICLES
  • Holden Rodeo LT Crew Cab, Model RA Rodeo 2WD, 4/04, 3.5 V6 Petrol, GVM 2800kg, Odometer Shows 249,112kms , Rego Exp 28/07/12
  • Toyota Hilux 140 Series Crew Cab, 02/01, 2.7L Petrol, Sign Written, Odometer Shows 214,844kms, Rego Exp 31/05/12
  • Toyota Hilux 2.7 VVti Work Mate, Model TGN16R-TRMDKQ3, 5/05, Petrol, Sign Written, Rego Exp 11/09/12
  • Toyota Hilux, 2.7 EFI Utility Model RNZ149R-KRMDKQ3, 5/03, Sign Written, Odometer Shows 192,931kms, Rego Exp 27/10/12

GENERAL EQUIPMENT

GENERAL EQUIPMENT
  • Packaged Air Compressor, Atlas Copco Model GA30FF, 7.5Bar, 30kw
  • Packaged Air Compressor, Sigma Model AS36
  • Packaged Air Compressor, Pilot Model PS30G  
  • Panel Saw
  • Bench Grinders
  • Bench Drills
  • Pedestal Drills
  • Assorted Office Furniture & IT Equipment
  • Storage Cabinets
  • Work Benches
  • Pallet Racking
  • Column Crane, w/- Hitachi 1T Chain Hoist
  • Stock Racks
  • Spray Booths/Spray Painting Equipment
  • Scaffold Tower
  • Flammable Liquids Cabinets
  • Ladders
  • Stillages
  • Loading Ramp

Sale Information

Sale Information

This Sale is GST Exclusive

This Sale has a 7.5% or 13.5% Buyers Premium - refer to each Lot

For example:

Successful Bid Price is $100 + 7.5% Buyers Premium = $107.50+ 10% GST = $118.25

or

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50+ 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing.

Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Online Auction Closing

Online Auction Closing

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

OH&S

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Persons under the age of 15 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • Grays (NSW) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.

Safe Work Method Statement.pdf

Sale Of Stock - Located Villawood NSW

Refer to Sale No. 5002951 for stock (link below).  Goods also located at Unit 2, 42 Lisbon Street, Villawood NSW

http://www.graysonline.com/sale/5002951/manufacturing/unreserved-stock

Inspection

Inspection
  • Inspection of the assets is highly recommended.
  • Bids on assets in this sale should be made based on your inspection and assessment of the goods.
  • Descriptions and photographs should be used as a guide only.
  • If you are unsure do not bid as no refunds will be given.

Inspection of assets can be made at the following times:

  • Monday 23rd of April between 9:00am & 4:00pm

Location: Unit 2, 42 Lisbon Street, Villawood NSW

Asset Collection Post Auction

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

  • Monday 30th of April between 9:00am & 4:00pm
  • Tuesday 1st of May between 9:00am & 4:00pm
  • Wednesday 2nd of May between 9:00am & 4:00pm
  • Thursday 3rd of May between 9:00am & 4:00pm
  • Friday 4th of May between 9:00am & 4:00pm

Location:

  • Unit 2, 42 Lisbon Street, Villawood NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting staff to release your purchases to the third party.

Please Note:

  • Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
  • Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
  • Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

Bidding History

Bid History
Bidding Details Bid Time Bid Price Bid Qty Win Qty
j.p - prairiewood NSW24/04/2012 4.18.28 PM AESTAU$13911
S.K - PARRAMATTA NSW24/04/2012 4.13.02 PM AESTAU$12910
c.m - wetherill park NSW24/04/2012 4.08.19 PM AESTAU$10910
k.s - revesby NSW21/04/2012 12.11.43 AM AESTAU$5910
h.y - ermington NSW20/04/2012 11.06.10 PM AESTAU$4910
T.S - Revesby NSW20/04/2012 2.55.02 PM AESTAU$4910
z.t - putney NSW18/04/2012 9.27.03 PM AESTAU$3910
m.k - regents park NSW18/04/2012 4.47.11 PM AESTAU$2910
h.b - Bringelly NSW18/04/2012 4.03.36 PM AESTAU$1910
E.G - Oran Park NSW18/04/2012 3.35.54 PM AESTAU$910
Loading content...
Loading content...