Tascam US366 Recording Audio Interface PC USB US-366

Tascam US366 Recording Audio Interface PC USB US-366

Product Information:

High-Performance Hardware For High-Quality Sound Recording To TOP

High-Quality HDDA – High Definition Discrete Architecture – Mic  Pre-Amplifiers

To ensure superior sound, TASCAM organized months of tests and trials to  design the HDDA mic pre-amplifier. Manufactured with a discrete structure and  select premium parts, the HDDA pre-amp achieves a wide frequency response (10Hz  to 68kHz), high S/N ratio, low noise and low THD+N.

US-366: Up to 192kHz/24bit Recording – US-322:Up to 96kHz/24bit Recording

In the process of creating music, many engineers have started utilizing  high-resolution formats while recording to ensure the best quality sounds. The  US-322 and the US-366 are suited perfectly for these high-quality minded  recordings.

(Included CUBASE LE can not record by 192kHz)

Two XLR/TRS (MIC/LINE) Inputs with Full +48V Phantom Power Supply

The US-322 and the US-366 are designed with two XLR with +48V phantom  power and two TRS inputs. Having both options for condenser mics and line level  inputs ensures you are getting the best possible sound and lowest-noise when  recording. In addition, INPUT-1 can connect any high-impedance equipment  directly, like a guitar.

On-Board Digital Mixer (DSP Mixer) for Easy, Convenient Professional  Recording To TOP

The DSP Mixer Has Two Operational Modes Designed for Music Creation and  Podcasting

The DSP mixer function provides a multi-track mode and a stereo-mix mode.

Multi-track Mode

The multi-track mode is ideal for music creation. This mode delivers  independent monitor-mixing from a send-level like an inline-console to a PC. In  addition, this mode delivers monaural-monitoring.

Stereo-mix Mode

The stereo-mix mode makes podcast recording or broadcasting convenient  and easy. An output audio signal from any PC can relay that signal back to the  PC again via your DSP mixer. Any BGM from a PC can mix your voice by microphone  then the mixed sound will transfer back to the PC again.

On-Board Effects Supports High-Quality Recording (Send Effects and Insert  Effects)

The US-322 and the US-366 are designed with on-board effects such as  compressor, 3-band EQ and Reverb all located on-board the DSP. While recording,  you can use the input effects for any input signal and the reverb effect on any  monitoring signal at the same time.

(DSP effects can use on 44.1/48kHz operating)

Insert Effects

The input effects can be selected from compressor or 3-band EQ. Input  effects can use various recording. For example, while recording vocals you can  boost your high-frequency range with the 3-band EQ. Also, the compressor effect  is very convenient at recording especially for bass guitar, vocal and drums.

Send Effect

The send effect include just reverb. The reverb effect is necessary  articles at recording. Monitoring sound will get wet-sound by this reverb  effect, but a send-sound to a PC keeps just dry sound.

Dedicated MIXER PANEL Button Recalls The DSP Mixer with One-Click

The US-322 and the US-366 are built with a "MIXER PANEL" button located  conveniently on top. This button provides a one-click recall function for the  DSP-mixer. When pushed a second time the mixer panel will be conveniently  hidden.

Suited for Various Recording Environments with Adaptable Features To TOP

Low-Latency Monitoring via DSP Mixer for Stress-Free Recording

The US-322 and the US-366 provide low-latency monitoring via the on-board  digital mixer. Volume can be monitored and adjusted easily with the dedicated  knob on the top-panel.

Oversized LINE OUT Volume Knob for Easy Monitor Level Setting

This oversized volume knob can be an integral setting for easy and speedy  fine level adjustments.

Classy Desktop Design, Luxurious Feel and Rugged Aluminum Body

The US-322 and the US-366 look so good, you'll be motivated to use it.  The adopted "Desktop Layout" makes these models easy-to-use even in tight  spaces.

Dedicated the US-366 Features To TOP

LINE 3-4 Analog Connectors – Select Between Input or Output, Up to Six  Inputs or Six Outputs

The US-366's LINE 3-4 connectors can be selected between input and output  to customize TASCAM's US-366 to any recording environment. When "INPUT" is  selected, you can connect an abundance of line-level audio devices. When  selecting "OUTPUT", connect to devices such as multiple headphone amplifiers.  This system provides dedicated monitoring management for each player.

(When operating on 192kHz, LINE 3-4 connectors outputs same signal as  digital output.)

Coaxial/Optical Digital Inputs/Output

The US-366 has two types of digital input/output connectors (RCA Coaxial  and TOS-link Optical). Two outputs can transmit the same signal at the same time  but when input is selected, only one connector is available at a time.

RC-3F Foot Switch Ready –Control Your DAW Hands-Free

The US-366 can connect the optional RC-3F foot-switch to provide  hands-free control for your DAW. Utilize this feature while playing your  instrument or recording at a distance from your computer. This feature operating  on "Mackie Control" or "HUI" emulation and can be select from two modes.

PLAY mode: RW, PLAY/STOP, FF

REC mode: PLAY, REC, STOP

Specifications:

Scale:

12-note equal temperament

Detection Range :

A0 (27.50 Hz)-C8 (4186 Hz)

Precision:

+/-1 cent

Reference pitch:

410...480 Hz (1 Hz steps)

Dimensions:

2.28" (W) x 1.02"(D) x 0.50" (H) (AW2 only)

Weight:

AW2 0.61 oz. (including battery), Clip 0.62 oz. (large),0.13 oz. (small), 0.45  oz. (clip)

Battery life:

approximately 150/75/20 hours (backlight: unlit/soft/auto, tuner continuously  operating, A4 input)

Included items:

CR2032 lithium battery (3V) for checking operation, Instrument clip

* Appearance and specifications are subject to change without notice.

GST Note: GST is included in the price of this item. GST is included in the freight.