Sale : 3001816

• Mobile crane, Kato NK-200, 20 ton capacity, Serial No. CT201026, 1976, 4 axle spring suspension, 40m extension, 26.2m boom and 12m jib, with Mack engine and under carriage, diesel with 2 rear and middle outriggers, maximum load of 20,000kg, with tool boxes, ex council product, minimal work in the last 10 years, engine runs, boom jip operational, out of certification
• Telehandler, JCB 530B, 4WD with front staging legs, 6591 hours, Engine No. LD 50221U130873N, Serial No. 0014638, 11m boom, enclosed cabin, with bucket, runs, drives and functions
• Tractor, Fordson Major, with hydraulic Pelican grab, 2WD, power steering, rear tyres in good conditions, runs and hydraulics works
• Mobile crane, Crown, Unic, Nissan engine, 23 ton, 31m boom and 7.5m fly jib, 4 axle, spring suspension, rear and middle outriggers, Model KV30M, Chassis No. KW30M-03291, Engine No. PE6-022023, 96-0320, operational
• Land fill compactor, Caterpillar 826B, articulated, 6677 hours, has been serviced by Caterpillar, (William Adams at 6500 hours on 02/02/11), runs and all function works, glass window in cab will be complete
• Telehandler, JCB 525-57, 1991, Engine No. 539354T, 5333 hours, with rops cabin, 4WD, planetaries, diesel, runs and drives
• Van trailer, Maxi Cube, 40 foot, barn doors, fibreglass lines, Steel chequer-plated floor. Rear barn door and one side entry, tri axle
• Tractor crane, Cranvel, 8 ton capacity, high pressure, 2WD, Starts instantaneously. Starts, runs and drives
• Crane truck, International Acco 1950C, 1982, GVM 20,900, GCM 25,400, Tare 8420, Vin No. L01506, Serial No. 2624898, tandem axle, 6m tray, with Hiab 6 tonne crane, operational, 754,000kms showing, 3 seater
• Mini Loader, Kanga Loader 2005 model. 2,500 hours. 4 in 1 buckets. Starts and runs well

• 1989 Hino tray truck, 4 x 2 drop down side, VIN: JHDFC144KXXX11056, Engine Number: W06016217, 527,500kms, 6m tray
• Ditchwitch JT 820 directional boring drill, 2230 hours, fully operational, 2 drill heads and housing, 1 swivel, 40 rods, small reamer (90mm), spare water swivel, rod wiper
• Ditchwitch JT1720 directional boring drill, fully operational, 4700 ours, 58 rods, 1 display, 2 spare sons, 750 ditchwitch tracker, 950 T ditchwitch locator, 4 drill head housings, assorted drilling bits
• Large Quantity of Concrete Pit Lid and Pit Surrounds, Telstra, Comms and NE
• Assorted Steel Pit Lids

• 2009 ISUZU NPR 300 Medium- Series II, Body Type: Cab Chasis Table / tray with Drop sides, Compliance Date: Feb 09, Engine Type & Capacity: 5.193 cc  4 cylinder Turbocharged, Transmission: 6 speed Automated Manual Transmission, Odometer (Showing): 53409, Keys: Yes, Registration Number: UYB422, Registration Expiry: Sold Unregistered (No Plates), Colour (Exterior / Interior): White, VIN / Chassis Number: JAANPR75H87103115. Features: ABS Brakes, Front Air Bags, Air Conditioning, Stability & Traction Control, Electronic Brake Force Distribution, CD Player, Power Windows, Satellite Navigation, Trade Rack, Driving Lights, Remote Central Locking, Bull Bar
• Water Tank Truck, Kenworth, Tandem Axle, 20,000 litre tank, with pump, 141,466kms on odometer, automatic transmission, 4 speed, needs jump start

• Ditch witch 3700 trencher with backhoe attachment, 1600mm (w) blade, Model No. 3700DD, Date of Manufacture: 2000, Serial No. 3T1070, 1844 hours on meter, trencher Model No. H314, Bockhoe Model No. A322

• Late Model Iveco Tray Truck, 54,736kms on odometer, Vermeer directional drill, D16 x 20a navigator, 2599 hours

• Trailer, single axle, drop deck, (20 foot bottom deck), (10 foot top deck), gate pockets, spring, manual stands
• Prime Mover, Atkinson, F3870, single drive, 1978,l diesel, spring suspension, 350 NTC, Cummins engine, 10 speed road Ranger, sleeper cab, unknown kms, 4 x 2, operational, fibreglass cab
• Truck Tipper body, aluminium, Gorski, 12 ton capacity, 20 cubic metre, with roll over tarp, 4.2m length x 1.8m height, body only
• Tipper trailer, Gorski, aluminium body, tri axle, ring feeder, 5.3m length x 2.2m height, spring suspension, high sides with roller over tarp, with exterior ladder, spare tyre, 15 ton payload, 30 cubic metre, grain shoot, 2 way tailgate
• Industrial front end loader, Chamberlain Champion MKII, engine running, but transmission in pieces, 2WD, no bucket
• Grain extension top for tipper body, steel, roll top tarp, 3.45m length x 2.4m width
• Fibreglass truck body, with side door
• 2 x Silos, fibreglass body, steel frame, 10 - 12 ton capacity, centre empty with side bagging shoot
• Silo, fibreglass body, steel frame, 10 - 12 ton capacity, centre empty with side bagging shoot
• Water tank, stainless steel, 17000 litres
• Tray truck, Isuzu KT 26, 1984, 3.3 diesel direct injection, 3 seater, 5 speed, 4 x 2, GVM 5600, working unit
• Lifting A frame gantry, with 2 girder trolleys, approximately 4m (h) x 10m (l), 4 tonne (
• Steel truck tray, 5200mm x 2400mm,
• 20 foot skel chassis,
• Conveyor, rubber belt, Sew-Eurodrive, 3 phase geared motor, 0.75kw, 750mm (w) x 4800mm (l), steel frame
• Concrete paddle mixer, comprising hopper and loading scale, and feed conveyor
• Drop deck trailer chassis, bogie axle, leaf spring suspension, 3.7m top deck, 6.7m bottom deck
• Crane lifting fork attachment, adjustable height and forks, maximum 2500kg capacity
• Site shed, skid mounted, approximately 2400mm x 2400mm, lifting lugs, steel frame
• Tandem car trailer, 4800mm (l) x 1800mm (w)
• Galvanised steel army trailer, 1300mm (w) x 1800mm (l), single axle
• Sleeper cab, approximately 2350mm (w) x 800mm (d) x 1500mm (h)
• Galvanised steel stillage, approximately 1800mm (h) x 1200mm x 1200mm, tilted floor with bottom half door
• Salter crane scales, 0 - 100kg

• 2011 Toyota Prado station wagon - Diesel, Registration: B17XG, Engine No.: 1KD2071156, Vin: JTEBH3FJ60K044877, 100,000km
• 1995 Caterpillar 936A loader, Registration: CR7342
• 1999 JCB backhoe, Registration: ED6092, Engine No.: B50607492618D, Chassis No: SLP3CXTSWEO477134, 6,700 hours showing, Tilt A Hitch 4 buckets forks @ 411 bucket
• 2011 Thwaites 9 tonne dump truck, Registration: C09BE, Engine No.: NM38816U083764U, Serial / Vin: C0100
• 2001 Hitachi ZX200LC/2.91, 20 tonne excavator, Registration: MAIB only, Serial No.: 1G6P0103035, Engine No.: 130187, 12,000 hours showing, Tilt A Hitch 3 buckets, Thumb pipe for hammer, new chains
• 2003 Hitachi ZX210K 20 tonne excavator, Registration: MAIB only, Engine No.:170356, Serial No.: HCMIG800COO109077, Tilt A Hitch 3 buckets, thumb pipe for hammer, new chains
• 2011 Hitachi ZX120-3, 12 tonne excavator, Registration: MAIB only, Engine No.: 115140, Serial / Vin: HCM1R100T00083057, Tilt A Hitch 3 buckets, pipe auqar - hammer, rubber on steel, s-garding

• 2003 Kobelco 21 tonne excavator, Model SK210-6E, Serial No. YN09-35150, showing 11,141 hours, hammer piped, hydraulic quick hitch, GP bucket, undercarriage worn
• 05/2001 Komatsu loader, Model WA500-3, showing 27,351 hours, Serial No. 50972, 3 cubic metre bucket, load scales, runs ok, putting water into cylinders 1+2, new tyres
• 1998 Western Star 8564 tipper, Vin SAF83D3TR05087355, 6x4, Bartlett ball, series 60 detroit, 18 speed road ranger gearbox,
• 2007 Kobelco SK200-8 20 tonne excavator, Serial No. YN11045821, hammer piped, hydraulic quick hitch, showing 4778 hours, A/C cabin, with GP bucket
• Beavertail tray comes with hydraulic ramps 6m
• Finlay block maker, 27 hours, Model F44SGALL (Unused)
• 2004 Komatsu PC200-7 20 tonne excavator, showing 10,298 hours, quick hitch, hammer piped, new undercarraige, GP bucket, forestry guarding
• 2004 Komatsu 20 tonne excavator, Model PC200-7, showing 10,900 hours, GP bucket, quick hitch, hammer piped
• Tandem airbag suspension plant trailer, bartlett ball hitch
• Loader, Hitachi Landy LX20, articulated, showing 1471 hours, 4WD, ID# 40A02643, with bucket, HST, Diesel
• Wheel loader, Komatsu WA100-3, avance loader, articulated, Serial No. 36382, ID# KMTWA011K01056382, enclosed rops cabin, with loadrite digital pro scales

• Mini Digger, Toro Wheelmaster, 323 model (22318) Two years old - 2010 model, 4Paw-4WD (independent wheel traction) , 4 in 1 Bucket, Auger Powerhead & Universal Swivel, 350/450/600 Augers, Spare Tyre, Kohler Command Pro 23 Motor Petrol Electric Start Four cycle / twin cylinder / air cooled, 3 year warranty, Total 142 hours, Tyson Tandem Australian made trailer Steel / checker plate White rims Checker plate toolbox Fuel Carrier

• Coles Hydra crane truck, Model 10/12, maximum load 12 tonne, date: 1972, International acco 1910A 6x4, 6 cylinder Perkins diesel phaser motor, approx 50kms since rebuild, never used since compliance test, eng no. 354UR25824, 5 speed, 3 speed joey box. 25 year major inspection carried out May 10th 2010. Running condition
• Linmac 10 tonne tractor crane, Model N/C 1081 8-10, capacity 10 tonne, date: 1982, John Deere 4 cylinder turbo diesel, vin: MK43001, Eng no: V908209P, 1264 hrs, engine re-build approx 4-5years ago. 25 year major inspection carried out 18th march 2009. Running condition
• Franna 16 tonne crane, Model 4WD-AT16, date: 1996, capacity 16 tonne, 18868 hrs, Hino turbo diesel 6 cylinder engine, Alison auto, Rockwell diffs, 12637 kms, vin: 4WD163117, eng no: H06CTE31441, s/n: 0981107. 25 year major inspection carried out 12th march 2009. Running condition

• Grader, caterpillar 112F, enclosed cabin, with rippers, engine needs attention, with knuckle hydraulic assist been fitted
• Tautliner trailer, Haulmark drop deck ``A`` trailer, 2000, tri axle, manual stands, Vin No. 6T9T25ABJYOAPMT68, 27 tonne, air bag suspension, approximately 7.5m length, 10 pallet, sold unregistered
• Water pump, 4 cylinder caterpillar motor, with Southern Cross RPE 3 inch outlet, with steel frame, 2500Kpa
• Dry van truck, Iveco Turbo Daily 49-12, 1999, Vin No. ZCFC4980105204784, 5 speed manual, 3 seater, engine needs attention, (drop valve, heads off at the moment), 4.5 metre van, side and rear doors, 4 x 2 with tailgate loader, roof needs attention but frame in good condition
• Ford Transit van, 2000, 5 speed manual, 3 seater, tare 1799, Vin No. WFOLXXBDVLYB73489, engine needs attention/overhaul, not working, petrol
• Ablution block, 3.6m x 3.02m, 2.6m height, 3 x cubicles and urine trough, hot water system and 3 x sinks, with lighting, no leaks, in good condition
• Isuzu pantech truck 800, 1996, 4 x 2, GVM 13,800, GCM 20,400, 6.7 metre dry van, Tare 8400, Engine No. 6HE1864589, Vin No. JALFTR32NR300893, 891,355kms, 7 speed, rear doors, operationa
• Transfer pump, Ebsray BPY600, diesel engine, with 3 inch centrifugal winter pump, engine runs but pump needs attention, 28 hours Forklift, Nissan HOIM18, 1.8 lifting capacity, 2 stage mast, 5000mm lift height, gas, solid tyres, dual fuel, manual, was operational but starter faulty, dual wheels at front
• Tautliner truck, Isuzu FRR Sitec 175 500 long, 2000, Engine No. 6HH1289770, GVM 10,400, GCM 14,890, Tare 3200, 6.4 metre curtain sider 735,055kms on odometer, 5 speed manual, 3 seater, 03/00
• Compressor, cylinder, 3 phase
• Crane truck, International Acco Cab 1930C, with Atlas hydraulic crane, 3.2 tonne lift capacity, operational, with 8 metre steel tray with timber floor, with 13 speed gear box, motor removed
• Mobile welder, single axle steel box trailer, with Onan performer 18XSL, with Lincoln arc welder, AC/DC
• Fuel truck, International Acco 2350E, with Cummins 240 engine, 1991, Vin No. 6F2232300MDX10366, GVM 23,500, diesel, Eaton Fuller gear box, 3 seater with Marshall Lethlean Industries 12000 litre tank, aluminium, 35Kpa, tandem axle, with bowser, rear platform and hydraulic tailgate, bottom low tanker, 2 hose reels, 16,000 litre bottom low barrel, engine needs attention
• Fuel trailer, diesel, twin axle, 2500 litre capacity with motor, hose and gauge at rear in lockable cage
• Plant trailer, Beavertail tandem, 2001 Vin No. 6D9TFTAGTM426517, 20,000 tonne, Bartlett ball, 7.2 metre length, with hydraulic ramp, good condition, 8.25/15 tyres, spring (trailer only)
• Tipper trailer, Hamelex, 1988, Chassis No. HX4782, ATM 22,000, tri axle, damaged front axle, needs replacing, 5.1 metre length with roll tarp, super dog with steel body

• Tray truck, Ford Trader 0811, 1988, 4x2, Vin No. UHDXJE36637H, Engine No. C100457, GVM 7035, Tare 3320, 5 speed manual, 3 seater, approximately 5.5m tray length, 294,846kms, operational

• 20T GP bucket 1050mm wide, Suits PC 200 & CAT 320. 80mm pin, 330mm Between the Bosses & 446 Pin Centre`s. Bolt on Side Cutters. Can supply pins at addittional cost. Good wear plate straps from cutting edge to ears of bucket
• 20T sort, shaker, sieve bucket, 1500 Wide. 803 Kg. Komatsu GET. Will suit PC 200 Komatsu & Cat 320. Rib Spacing is 70mm to keep house bricks in whislt sorting
• 20T Mud bucket, Has reversable Bolt on Edge & 3 x 200mm x 10mm wear plates underneath and at the base of the back of the bucket for great protection and bucket life.Suits Komatsu PC 200 & CAT 320. Pins 80mm. Between Bosses 330mm & 446 Pin centers
• 4-5T GP 600mm wide, Great little GP bucket 600mm wide. 4 good Teeth. New. Has good wear plates under base for strength and long life. Pins are 40mm diameter, Between Bosses are 147mm & pin centres are 185mm.
• 4-5T GP 500mm wide, Great little GP bucket 500mm wide. 4 good Teeth. New. Has good wear plates under base for strength and long life. Pins are 55/35mm diameter, Between Bosses are 176mm & pin centres are 194
• 12T GP 855mm wide, Nice 12T GP bucket with good wear plates enderneath and half way up the back of the bucket. Has Komatsu GET fitted with horozontal pin retainers. Suits PC 120 with 60mm pins / 260mm between the Bosses and 375mm pin centres
• 20T tilting mud bucket 2m wide, Heavy strong bucket 1480Kg with twin ram tilt mechanism. Has a reversable bolt on edge and 4 200mm x 10mm wear plates underneath and at the base of the bak of the bucket for great protection and bucket life. Suits Komatsu PC 200 & CAT 320. 80mm pins, 330mm between the bosses and 446 Pin centre`s. Easy to change to suit other machines. Could be used on machines to 30T
• 2.4m loader bucket, used bucket in need of some TLC. Quite solid but needs a few teeth and a few weld repairs. Suits Komatsu D75 Loader

• 1998 Iveco MP4500 6 x 4 Prime Mover, Registration TJG 556, build date not sighted, Vin No. not sighted, Eaton fuller manual transmission, spring suspensions, sleeper cab with double bunks, alloy bull bar, UFH radio, twin tanks, this truck has no engine
• Tennant 6550 LPG powered sweeper, Serial No. 6550-8909, hours unknown, powered by a Ford 4 cylinder engine, fair condition

This sale is pick up only from various locations in Australia.

These Assets are used therefore inspection is highly recommended prior to bidding, description & photos should be used as a guide only.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $5000 must be paid by direct deposit.

A Buyers Premium of 7.5% or 13.5% + 10% GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

This Sale is GST Exclusive.

This Sale has a 7.5% or 13.5% Buyers Premium ie Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50 + 10% GST = Total Of $124.85.

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. For invoices totaling in excess of $5,000 GraysOnline reserves the right to charge a deposit against the purchaser’s credit card to a maximum of $5,000 or 20% of the invoice total. In bidding in this sale, the buyer agrees without reservation to GraysOnline doing so. Contact (02) 9741 9600 or email accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totaling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail Price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Occupational Health & Safety Asset Removal and Reuse

GraysOnline warn buyers that all plant offered for sale at Auction may not be fit for use in a workplace. It is the buyers/users responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health & Safety Act and is fit for purpose.

The cost and responsibility for all aspects of asset removal lies with the buyer. All work carried out by the buyer or his/her agent must be in accordance with relevant site and/or industry conditions as well as to the instructions of GraysOnline Auctions and our vendor.

A summary of these types of enforceable requirements is as follows.

• Persons under the age of 15 years of age will not be permitted on site unless accompanied and supervised by an adult at all times
• Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site
• Forklift, crane drivers, riggers etc will be required to produce license before commencing work on site
• It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives
• Work carried out on this site must be done in a manner compliant with all Occupational Health & Safety legislation
• All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment
• GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site, eg safety footwear, safety eyewear, hard hats etc
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes GraysOnline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often.

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

By appointment with Sue on 03 8552 4444 or email to susanp@grays.com.au

Location ~ Various locations

Delivery is not an option for this sale. The removal of the goods is the buyers responsibility.

The items are located at various locations.

• The area is defined as a worksite and in accordance with the requirements of the VIC OH&S Act 2004, site removal activities must be conducted on a safe manner. In order to manage and minimise site risks. The assets have been categorised into type A or B Assets.

Type "A" assets are low risk and are to be removed by the purchaser with Grays staff supervision and are to be collected on Monday 20th August 2012 by appointment with Sue on 03 8552 4444 or email to susanp@grays.com.au.

Type “B” assets are high risk - No items in this sale have been categorised as Type B Assets.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid.

Please advise Graysonline of your removal/collection arrangements, the following contractor package must be faxed or emailed to Sue susanp@grays.com.au or 03 8552 4400.

An invoice will be available for collection when you pick up your goods.

Once assets are removed the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

Important Information: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots and provide suitably qualified personnel to remove their lots. All lots have been electrically disconnected. Occupational Health and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

If you intend to send a Third Party to collect your goods on your behalf, you need to send them with a copy of your Winner’s E-mail and Signed Note of Authority permitting GraysOnline staff to release your purchases to the third party. Alternatively, Email - susanp@grays.com.au or fax all relevant documents to (03) 8552 4400 with the required information to ensure a speedy and efficient collection.

The information needed is:

• Sale and Lot Numbers e.g. 002-60325
• Buyer’s Registered Name and/or Email
• Transport details: Company Name, Contact Person and Job Number provided by the transport company.

For an obligation free appraisal and quote please contact Michael Bray today on 0407 867 082, 03 8552 4444 or email to michaelb@grays.com.au