Sale : 5003974

This Sale is Pick Up Only from West Gosford, NSW

These Assets are Used therefore Inspection is Highly Recommended Prior to Bidding, Description & Photos Should Be Used as a Guide Only

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

ALL ASSETS IN THIS SALE ARE SOLD AS IS

Invoice totals exceeding $5000 must be paid by direct deposit

A Buyers Premium of 13.5% + GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

BUYERS PLEASE NOTE:

• Collection of assets is the responsibility of the purchaser.
• Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods.
• Descriptions and photographs should be used as a guide only.
• If you are unsure do not bid as no refunds will be given.
• Staff are onsite for security purposes only. Please make sure you have people to help you load your items and right transport.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.
• Pick ups are not allowed outside of the dates/times specified.

• Rock and Roll type, purpose built steel RHS square 75mm tube fabricate A-frame design with cradle frame, suit cylindrical 5000 litre moulds, fitted with hydraulic operated single ram for rocking action and hydraulic chain drive motor for rotation action, LPG open flame gas fired heating burners, comprising 2 x pivoting arm end multi burners and 1 x fixed centre multi burner, internal hydraulic power pac drive unit, 415 volt, overall footprint approx 3200 x 3200 x 2100mm(h) with LPG burner lighting lance hose and regulator housed in a 4 sided safety cage, aluminium framed, mesh panels, single access door with safety sensor locking together with remote pedestal programmable smart relay controllere
• Rock and Roll type, purpose built, steel RHS rectangle tube fabricated A-frame design with cradle frame suit cylindrical 3000 litre moulds fitted with hydraulic operated single ram for rocking action and hydraulic chain drive motor for rotation action, LPG open flame gas fired heating burners, comprising 2 x pivoting arm end multi burners and 1 x fixed centre multi burner, internal hydraulic power pac drive unit, 415 volt overall foot print, approx 3100 x 2100 x 3100mm(h) housed in 3 sided safety cage, aluminium framed mesh panels, single access door together with remote pedestal programmable smart controller
• Rotational Moulding Machine, Rock and Roll type, purpose built 2008 steel RHs rectangular 50 x 75mm tube fabricated, A-Frame design with cradle frame suit 5000 litre moulds fitted with electric motor, chain and sprocket drive, rocking action and rubber belt driven geared drive motor rotation action, LPG open frame gas fired heating burners, comprising 2 x pivoting arm end multi burners and 1 x fixed centre multi burner, 415 volt.  Overall footprint approx 2700 x 2400 x 1400mm(h) together with remote pedestal PLC touch screen controlled programmable controller and internal temperature control.
• Rotational Moulding independent 2 arm turret carousel oven, Roto Chine Model 3000 by Armand Engineering (Aust) 3 cubic meter oven capacity LPG gas fired heating with recirculating blower motorised fan unit, approx 1500mm dia together with 2 independent motorised swivel and rotating product turret arm on floor steel base, overall foot print 9m x 9m x 4.5m(h) sheet metal fabricated with motorised twin in/out access doors together with electrical control cabinet, remote console and spare turret arm.
• Mould Cooling Station, purpose built comprising 3 x blower fan units, Aerotech fans, Model AF380 380mm dia fans, 415 volt drive motors bracket mounted on steel 75 x 75mm RHS square tube elevated frame

• Atlas Copco Model GA30, package screw S/No. AII319976, Mfg 1996, 7.5 bar max working pressure, 83 litre per/sec free sir delivery.  Hours not available - Last serviced at 60,000 hours (decommissioned), digital display with twin in-line filters, overall size approx 1800 x 900 x 1560mm(h), weight 840 kgs, 415 volt hard wired (service history available)
• Markwell twin cylinder head, v-belt drive by 7.5kw (10HP) 415 volt electric motor on horizontal receiving tank, size approx 400mm dia x 2000mm(l) on feet with relief valve and gauge (Note:  Operation unit operating on one cylinder only)
• Air Dryer, Atlas Copco Model FX10 (AB) Mfg 2007, 13 bar max working pressure, 240 volt plug (Note:  disconnected ready for collection)

• Hafco Metal Master, Model VB-450, approx 450mm throat, table size 500 x 600mm tilting type manual screw blade tension and guide height, variable speed, fitted with blade guillotine, welder and grinder, 415 volt plug in

• Kent Model PP-200E, fitted travelling and adjustable 4 heads, pneumatic operated, foot controller, digital input and display panel with travelling bed, 240 volt
• Kent Model PP-200F fitted twin travelling adjustable heads, pneumatic operated, foot controller, digital input and display panel with travelling bed, 240 volt.

• Pro Krane 500 kg swl, steel fabricated class C3 RHS square, approx 250 x 250 x 6.7 meters(h) free standing upright support beam fitted with 4800mm(l) steel swing jib, approx 270 deg rotation, fitted with Hitachi 500kg electric chain hoist, approx 5 metre drop, pendant control, 415 volt plug in.
• Pro Krane 500kg swl steel fabricated Class C3, RHS square, approx 250 x 250 x 6.7 metres(h) free standing upright support beam, fitted with 5300mm(l) steel swing jib, approx 270 deg rotation fitted with Hitachi Model 1/2 SH2 500kg electric chain hoist, approx 5 metre drop, pendant control for powered jib swing, chain hoist travel and rise/fall, 415 volt plug in.

• Quantity of APC & Dexion pallet racking

• 3 x Wedderburn Model OFW-B150 150kg x 0.02kg capacity, stainless steel platform 460 x 330mm with remote digital readout display, 240 volt power supply

• Safetech 1000kg max lift capacity, platform size 2000 x 1150mm, approx 1600mm max lift height, single hydraulic ram operated inbuilt hydraulic power pac, single end push bar, fitted skirt and safety stop bar on 4 sides, pendant control, 415 volt plug power supply.

• 2 x airbox type 800 Doppelshalig, volume 2000 cubic meters/hour comprising heating, cooling, filter and fan units with water collection tank and discharge tank, 415 volt

• Including & not limited to 4 x Sulo 2000 litre capacity, low density poly-ethylene construction, approx 1900 x 600 x 2050mm(h), beige colour (Note:  Display Model)
• Rapidplas 3000 litre capacity, low density poly-ethylene construction, approx 2600 x 800 x 2100mm(h), beige colour (Note:  Display model)
• Sulo 4000 litre capacity, low density poly-ethylene construction, cream colour, approx 1600mm dia x 2350mm(h) (Note:  display model)

• Including, & not limited to: mild steel fabricated set up for rock and roll moulding machine including 1 x 4000 litre x 1 x 3000 litre together with common mould lid to suit both size tanks, size details for 4000 litre, 1610mm diameter, 2190mm height and 3000 litre, 1610mm diameter, 1840mm height both with 2 x outlet positions, 1 x 1" bucket outlet position, 2 x overflow positions, fits 420mm strainer
• 5000 litre capacity, mild steel fabricated, set up for rock and roll moulding machine, size details 2120mm diameter, 1840mm height, 2 x 1" outlet positions, 2 x 1" bucket outlet positions, 3 x overflow positions, fits 420mm strainer
• 900 litre capacity with conical top and folded sides - size details 1050mm diameter, 1230mm height
• 2500 litre capacity with conical top and folded sides, mild steel fabricated, set up for rock and roll moulding machine, size details 1640mm diameter, 1450mm height, fits 420mm strainer
• 2000 litre capacity with dome lid, mild steel fabricated, set up for rock and roll moulding machine, size details 1310mm diameter, 1840mm height, 2 x 1" outlet positions, 2 x 1" bucket outlet positions, 2 x overflow positions, fits 300mm strainer, FEA analysis completed
• 450 litre capacity with conical top and folded sides, mild steel fabricated, set up for rock and roll moulding machine, size details 830mm diameter, 960mm height
• 125 litre with conical lid, mild steel fabricated, set up for rock and roll moulding machine, size details 508mm diameter, 770mm height, 1 x 1" outlet positions, 2 x 50mm overflow positions

This Sale is GST Exclusive

This Sale has a 13.5%Buyers Premium

For example: 

Successful Bid Price is $100 + 13.5% Buyers Premium = $113.50 + 10% GST = $124.85

Product Condition - Please refer to the individual lot description for product condition. Most lots have pictures assigned to them. These should be taken as a guide only.

Payment - Invoice totals exceeding $5000 must be paid by direct deposit within 2 days of auction closing. Payment for invoices exceeding $5000 may also be made onsite via bank cheque. Contact accounts@grays.com.au for an exact invoice total. Please note that personal or company cheques will not be accepted. For invoices totalling less than $5000, your credit card will be debited within 2 days of auction closing. To assist in the processing of payments please have funds available. Invoice totals exceeding $5000 will not be split.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Any payment enquiries, please email accounts@grays.com.au

Original Retail Prices: In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP). All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Typically, auctions are over at their posted times. There are some exceptions to this, however, if there are any successful bids on a particular lot within 10 minutes of the close of the online auction (the “Going, Going, Gone! Period), it will be extended until there are no successful bids within the "Refresh Period".

There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding doesn’t stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time. This means it is a good idea to watch the action as the auction nears closing time and to check back often

Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times

• Monday 27th of August between 8:00am & 4:00pm

Location: 7 Bowen Crescent, West Gosford NSW

** DELIVERY IS NOT AN OPTION FOR THIS SALE. THE REMOVAL OF THE GOODS IS THE BUYERS RESPONSIBILITY **

Pick up date/time:

• Thursday 30th of August between 8:00am & 4:00pm
• Friday 31st of August between 8:00am & 4:00pm

Location: 7 Bowen Crescent, West Gosford NSW

To collect your purchases please attend the collection address during the times advised with a copy of your winner’s e-mail and photo ID. A copy of your invoice will be on site with GraysOnline staff to assist in documenting the removal process.

If you intend to send a third party to collect your goods on your behalf, you need to send them with a copy of your winner’s e-mail along with a photocopy of your photo ID and signed note of authority permitting Grays staff to release your purchases to the third party.

Please Note:

• Packaging and collection of assets is the responsibility of the purchaser. Delivery is not available.
• Any items not collected after the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.
• Items must be inspected before removal from site as refunds or exchange are not given under any circumstances.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (NSW) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (NSW) Pty Ltd will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc)
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8metres.

Note: Dismantling/Decommissioning of some assets in this sale will require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.