Sale : 9000398

Recommended Retail Price: $599.00 - The RRP is provided by the vendor and is accurate as at October 2011.

This is the 155mm blade system. The rpm is lower @ 4500rpm so with this model you can’t cut as deep as littlebrother. Idea for deeper cuts in other materials such as hard wood. (This is the model we cut the car in half with - shown in the TV ad which only took 16 mins?)

SAFETY FIRST WITH - NO KICK BACK!

No sparking – All Metal is touchable direct after cutting The Twin Blades & Lube System removes almost all the friction, With the 1st blade going clockwise and the 2nd blade going anticlockwise. The secret is to apply no pressure/force when cutting as this slows down rpm - wearing blades quicker. Let the weight of the unit push itself through the material you’re cutting.

The Package Includes:

• 1 x Big Brother Model @ 4500rpm
• 1 x Pair of Tungsten Blades (Installed)
• 1 x Hard Case with Handle
• 1 x Lubricating System (Installed)
• 1 x 6 Pack of Lube Sticks
• 1 x Wrench with Blade Locking Key Attached together

Recommended Retail Price: $499.00 - The RRP is provided by the vendor and is accurate as at October 2011.

This unit runs @ 5500 rpm ideal for metal cutting. Cuts all metal and can go as deep as 10mm if used as directed. Metal cutting is its primary job - cuts most other materials. Blades used properly give the same as 60 to 70 1mm metal cutting discs = no depth loss.

SAFETY FIRST WITH - NO KICK BACK!

No sparking - All Metal is touchable direct after cutting The Twin Blades & Lube system removes almost all the friction, With the 1st blade going clockwise and the 2nd blade going anticlockwise. The secret is to apply N pressure/force when cutting as this slows down rpm - wearing blades quicker. Let the weight of the unit push itself through the material you’re cutting.

The Package Includes:

• 1 x Little Bro Model @ 5500rpm
• 1 x Pair of Tungsten Blades (Installed)
• 1 x Hard Case with Handle
• 1 x Lubricating System (Installed)
• 1 x 6 Pack of Lube Sticks
• 1 x Wrench with Blade Locking Key Attached Together

• Item consists of blades only - No other accessories provided
• Blades used properly give the same as 60 to 70 1mm metal cutting discs =NO depth loss
• SAFETY FIRST WITH - NO KICK BACK!
• No sparking–All Metal is touchable direct after cutting The Twin Blades & Lube system removes almost all the friction, With 1st blade going clockwise and the 2nd blade going anticlockwise. The secret is to apply Nopressure/force when cutting as this slows down rpm-wearing blades quicker. Let the weight of the unit push itself through the material you’re cutting
• Two blades in perfect harmony. Twin cutter blades: For use with the twin cutter.
• Carbide tipped with Teflon coating to provide fast, smooth, clean cuts in wood, wood base materials, plastics, roofing materials, steel aluminium, copper and stainless steel.
• When cutting roofing materials, blades must be kept with a tar and pitch blade cleaning solvent.
• When cutting aluminium and copper, the lubricant system on the saw should be used.

• To be used with lubricating device when cutting Aluminium/Copper/Stainless steel & Cast Iron

This Sale is GST Inclusive (10% GST is included in the bid price of each item)

This Sale has a 15% Buyers Premium..

For Example:Successful Bid Price is $100 + 15% Buyers Premium = $115.00.

(Invoice Total = $115.00)

This is an auction sale.All assets in this sale are sold ‘As Is'

Assets included in this sale may be used, therefore inspection is highly recommended prior to bidding.

Some individual items may show signs of excessive wear and in some instances accessories or inclusions may vary from the standard.

Photographs, descriptions and condition reports (if any) should be used as a ‘Guide Only'.Bids on assets in this sale should be made based on your own inspection and assessment of the goods.

GraysOnline do not test auction items.We provide ‘No Warranty' as to the items working condition or sustainability for its intended purpose.

No refunds will be given.If you are unsure do not bid.

For invoices totaling less than $5000, your credit card will be debited within 2 days of auction closing.To assist in the processing of payments please have funds available.

Invoice totals exceeding $5000 must be paid by direct deposit or a bank cheque within 2 days of the auction closing.Please note that personal or company cheques will not be accepted.

GraysOnline are authorised to deduct up to $5000 from the purchasers credit card as a holding deposit on any items sold for over $5000 via our website.

Contact wareception@grays.com.au for an exact invoice total or your account queries.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale, this is what the inspection day is for.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn,

GraysOnline will not be organising transport of goods.Please consider this prior to bidding.

In certain circumstances, an item for sale on the site may display the manufacturers Original Retail price (ORP).All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. GraysOnline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned.

Typically, auctions end at their posted closing time. There are some exceptions to this.

However, if there are any bids placed on a particular lot within 10 minutes of the auction closing time (the "Going, Going, Gone!" period).

It will be extended until there are no more bids placed within ten minutes of the last successful bid.There is no limit to the number of times an online auction can be extended.

This makes GraysOnline work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time.

To ensure that you do not get outbid make sure you monitor the auction until you have won the item or enter an 'Autobid'that you think will win!

Why GraysOnline?

• 1,000,000 unique visitors each month
• 850,000 registered buyers
• National marketplace
• 24 hour bidding

Whether you have one item or hundreds, click on the link below and send a brief description of your surplus assets and one of our experienced project managers will contact you for an obligation free discussion.

Click here - stewart.dodwell@grays.com.au or call Stewart Dodwell on 0432 657 769

Collection is available for a week after the sale ends from Monday to Friday Between 9.00AM to 4.00PM Only.

Pick ups are not allowed outside of the days/times listed above

These Assets are Located at 216 Welshpool Road, Welshpool, WA for Collection.

Pickup can only be made once cleared funds are received.

Purchasers cannot pick up until the full invoice is paid.

Goods will only be released with the correct buyer details being provided (Full Buyer Name, Sale and Lot Number and ID).

Collection of the assets is the responsibility of the purchaser.

GraysOnline in Perth, WA - ‘WILL NOT' package your item or organise a courier / transport for the purchaser.

Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale.

Any items remaining uncollected after two days of the nominated collection times will be deemed abandoned and/or may incur a daily storage fee of $50 per day and/or removal fee.

If you intend to send a Third Party to collect your goods on your behalf, the information needed is:

• Sale and Lot Numbers e.g. 002-9000095

• Signed note/letter of authority permitting GraysOnline Staff to release your purchases to the third party.

• Copy of your paid invoice

• Copy of your drivers license

• Transport details: Company Name, Contact Person and Job Number provided by the transport company.

If you do not provide these documents your goods will not be released.

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

• Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
• Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
• Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

• Persons under the age of 15 years will not be permitted onsite.
• Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
• Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
• It is a condition of entry to site that all visitors comply with any directions given by Grays (WA) Pty Ltd staff or their representatives.
• Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
• All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
• Grays (WA) Pty Ltd or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
• The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below.