We are calling for donations for our mega charity auction for Australian bushfire relief "click here for more info."


Offers Invited - Truflow Spray Booth

Sale no: 7025235

Offers Invited - Truflow Spray Booth
Sikorsky
Sale type
Tender
Sale date/time
N/A
Sale location
130 Macarthur Ave, Hamilton, QLD, 4007
Buyers premium
7.50%
GST
Exclusive
Enquiries

Steven Hill steven.hill@grays.com.au or (m) 0417 930 581

Offers Invited

Offers Invited

All Offers to be Submitted by 7:00pm (AEST) 20th February 2020

If you would like to organise an inspection or make an offer on the unit, please call Steven Hill on 0417 930 581 or email Steven Hill

Offer Document

TRUFLOW Spray Booth

TRUFLOW Spray Booth

SPECIFICATIONS:

Utilities Required

  • Power: Refer to Drawings (Attached)
  • Gas: 4 Locations with 2500Mj/hr each (Total 10,000Mj/hr @7kPAGas)
  • Compressed Air: 4 Locations @ 25-50CFM each

Booth Construction & Features

  • Wall Panels: 100mm Insulated Panels finished in ColourBond off-white
  • Roof Panels: 150mm Insulated Panels finished in Colourbond off white
  • Frame: Modular Steel Frame with Engineered Modular Roof
  • Internal Dimensions: 8,300(W) x 23,000(L) x 7,700mm(H)
  • Lights (Side Wall): 28 (Total Lights) in Rear Access with Dual Baton Arrangement (56 Batons)
  • Lights (45 Degree Lighting): 43 (Total Lights) in Rear Access with Dual Baton Arrangement (86 Batons)
  • Heating System: 4 Heating AHU Units with Direct Fired Gas Heating
  • Roof Filters: 18 Filter Frames and Viledon PA560-10 Filters
  • Cooling and RH% Control
  • Data Logger
  • Ductwork: Galvanised
  • Variable Speed Drives
  • Cabin Pressure Manometer
  • Heavy Duty Escape PA Doors (Solid 50mm Steel Frame Outer)
  • Main Load Doors
  • Spray Compressed Air Regulator: 2 Spray Air Outlet Regulators & 2 Breath Air Outlets
  • TRUFLOW Fully Automatic Control System
  • Direct Fired Gas Heating
  • Ventilated Paint Mixing Room
  • Lift-Man Lifting System for Safe Operator Access
  • Split Booth Design

Paint Mixing Room Construction & Features

  • Inner Dimensions: 2,400(W) x 5,000(L) x 2745mm(H)
  • Exhaust Fan & Filter
  • Ductwork: Exe Rated

NOTE: This Booth is Brand New and Has Never Been Assembled

All Drawings & Complete Specifications Attached

**Photos Indicative***

Specifications

Drawings

Inspection & Collection

Location: 130 Macarthur Ave, Hamilton QLD 4007

Inspection & Collection: By Appoinment - Steven Hill 0417 930 581

General Site Information

General Site Information

Please Note: Enclosed footwear must be worn at all times when inspecting or collecting goods.

Site Access:

  • Persons under the age of 16 years will not be permitted on site unless accompanied and supervised on site.It is a condition of entry that all persons entering the site comply with any directions given by GraysOnline staff, their representatives or the site controller.
  • It is a condition of entry that all persons conduct themselves in a manner which does not endanger the health and safety of other persons on site, and which does not create a risk to health and safety.
Personal Protective Equipment (PPE):
  • GraysOnline will specify, according to the hazards and risks assessed as present on the site, any mandatory PPE required to be worn prior gaining approval to entry to the site. This equipment may include Safety Footwear, Safety Eyewear, Hearing Protection, and Head Protection, or any other item of PPE deemed necessary.

Removal of Plant Information

  • GraysOnline will specify the site requirements for the safe removal of plant from the site. All work carried out on site will be performed in a manner compliant with the relevant State Occupational Health and Safety Legislation. All work undertaken on the site must be performed by suitably qualified and insured persons.
  • Licensing of Tradespersons - All tradespersons must possess the relevant licences to undertake plant disconnection and removal of plant activities. Copies of these licenses will be requested prior to the commencement of work and copies/license details will be retained by GraysOnline
  • Insurances - Copies of Insurances - PI/PL and Workers Compensation will be required to perform work on the site and copies will be retained by GraysOnline.
  • Agreement - before any work commences the contractor/tradesperson must sign and agree to adhere to GraysOnlines OHS work practices.
  • Safe Work Method Statement (SWMS) - the contractor/tradesperson will be required to submit a completed SWMS
  • Work at Heights - All work above 2.0 metres will require the use of certified equipment. This equipment may include safety harnesses and work platforms. All equipment used will be in within the safe test date requirement for such equipment. All work at heights risks will controlled
  • Electrical Equipment- All equipment brought onto site must be considered safe and fit for use and be tested and tagged as required by AS/NZS 3760:2003: In-service safety inspection and testing of electrical equipment.
  • Electrical Disconnection of Plant - All disconnection of hard wired plant must be performed by a licensed tradesperson
  • Disconnection of Water - All disconnection of water services must be performed by a licensed tradesperson
  • Disconnection of Gas - All disconnection of gas services must be performed by a licensed tradesperson
  • Disconnection of Refrigerant Lines and Removal of Refrigerant Gases - All disconnection of refrigerant lines and removal of gases must be performed by persons possessing a current Refrigerant Handling Licence and have the required authorisations to store/sell refrigerant gases
  • Compressed Air - Compressed air must only be used for the purpose for which it is installed. Under no circumstances should compressed air be used for cleaning yourself down or other people; and never direct high pressure compressed air at other people. In addition to the risk of disturbed material getting into the eyes there is the possibility that air may be injected into the blood stream which can ultimately lead to death. The appropriate personal protective equipment (PPE) must be worn when working with compressed air.
  • Residual Waste – For assets that are deemed too risky to remove/relocate without the disposal of internal residual waste (including hydraulic/black water/by product/hazardous waste), a licensed waste disposal contractor is required to decontaminate the assets prior to removal or transport.

Surplus Equipment to Sell?

For an obligation free appraisal and quote or to learn more about selling at Grays, please visit SELL AT GRAYS

Why GraysOnline?

Why GraysOnline?
  • 2M+ Registered Users
  • 1M+ Unique Visitors Per Month
  • National Marketplace
  • 24 Hour Bidding

WHS

WHS

GraysOnline advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. It is the buyers/owners responsibility to ensure that an operational risk assessment is undertaken, prior to use, and the plant be brought to a condition which complies with relevant State Legislation, Regulations and applicable Codes of Practice. GraysOnline will provide:

  • Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
  • Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
  • Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.

Please note:

  • Enclosed footwear must be worn at all times when inspecting or collecting goods.
  • Persons under the age of 16 years will not be permitted onsite.
  • Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
  • Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
  • It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or their representatives.
  • Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
  • All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
  • GraysOnline or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.

Safe Work Method Statement

Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.

Please see example Safe Work Method Statement below:

Safe Work Method Statement

Non-Prescribed Electrical Equipment

Non-Prescribed Electrical Equipment

The DIY signage attached is in relation to non-prescribed electrical equipment purchased, of which electrical work is required under the Electrical Safety Act 2002 to be performed by a licensed electrical contractor or licensed electrical worker.

Examples-

  • Fixed-wired electrical equipment, such as air conditioners, stoves, ovens, electric hot water systems, ceiling fans, light fittings
  • Electrical accessories, such as socket outlets, light switches, electrical cable, wall switches, plugs and cord extension sockets
  • Electrical parts, such as electrical motors, switches, solenoids, elements

Electrical Power Tools & Equipment

if you have not purchased electrical tools and equipment in this auction disregard this notice.

Electrical Power Tools and Equipment (Inc. electrical leads)

The electrical articles in this auction have not been proved to be electrically safe. The electrical articles have not been tested by a qualified electrical worker and have not been proved to be

electrically safe. General advice on how to use second-hand electrical power tools and equipment (including electrical leads) safely. General safe use advice for electrical power tools and equipment etc. intended for use with rated voltage of not more than 250V for single phase appliances and 480V for other appliances. This advice is not intended to replace specific manufacturer's information but can be used as a general guide. This advice does not cater for young children or people who are physically weak.

You are urged to:

  • Use the power tool only for its intended purpose.
  • If the power tool is for indoor use only, do not use outdoors.
  • Do not immerse the power tool in water unless it is designed for this purpose.
  • Keep hands, fingers, feet, toes and hair away from dangerous moving parts, cutting blades and the like.
  • Do not use electrical power tools in the rain.
  • Make sure you have dry hands when operating an electrical power tool.
  • Do not use a damaged power tool.
  • A power tool may not be intended for use by children or people with an illness or disability without supervision.
  • Young children should not be allowed to play with the power tool.
  • Some power tools require special precautions for installation or user maintenance or both.
  • The plug must be removed from the socket-outlet before any cleaning or maintenance is done.
  • Do not place cord extension sockets or portable power outlet boards where they may be splashed or where moisture may get in.
  • Ensure ventilation holes or outlets are not blocked or partially obstructed.
  • If a fixed power tool does not have a supply cord and plug or other means for disconnection from the supply, a means for disconnection must be incorporated into the fixed wiring according to the Wiring Rules.
  • If the supply cord or plug is damaged, the manufacturer or its service agent or a similarly qualified person must replace the cord to prevent an accident.
  • Power tools with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its service agent.
  • Other power tools that have a supply cord that cannot be replaced, should be scrapped.
  • The power tool should be maintained in order to ensure a long, useful life and to protect the operator against electric shock or mechanical mishaps.
  • A safety switch can enhance electrical safety when using electrical power tools.

Sign Up Now

Sign up to receive upcoming auctions & special offers!

Privacy Statement and Consent: By providing your email address, you consent to us sending you our newsletters as well as promotional material, updates and further information about our products and services. Our Privacy Policy contains information about how you can access and correct your personal information, how to make a complaint, and how we deal with complaints.

Subscribe

Follow Us

We Accept

Follow Us

 

NSW Liquor Act 2007 - It is against the law to sell or supply alcohol to or to obtain on behalf of a person under the age of 18 years.
NSW Liquor Licence LIQP770010049
Motor Dealer Licence: NSW MD13910, VIC LMCT11156, SA MVD277714, QLD 1700072, WA MD25136. NSW Motor Vehicle Recycler Licence: M057736
Grays (NSW) Pty Ltd is a credit representative (number 509214) of CarLoans.com.au Pty Ltd (Australian Credit Licence 433137)

Download Our App